Question about Cars & Trucks

Open Question

How to replace space star rear control arm bushes

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Lower Control Arm Bushing replacement

Hi,
I just did this job on my 98 regal, and I own the service manuals also. The lower control arm bushing that usually goes, is the front one. The rear one doesn't usually go, it is horizontally mounted. The front one for some reason is vertical. The control arm must be removed, and put in a vise. The front bushings outer metal sleeve, must be driven out with a chisel. It comes out easily. The new bushing can be tapped in with a hammer. Hope this helps!
JOEVETTE

Posted on Mar 01, 2009

cadman000
  • 607 Answers

SOURCE: control arm bushings

Special tools are required. Definitely not for the novice. An alignment will be needed after the required work is performed

Posted on Apr 03, 2009

alicantecoli
  • 22114 Answers

SOURCE: Are the upper control arm bushing pressed in or

pressed in but can be removed by cutting with a hacksaw in reverse so to speak ,remove blade and push through bush to cut out the metal casing then pull new ones through with a long bolt and socket

Posted on Apr 11, 2009

daves944
  • 1050 Answers

SOURCE: My 318 e46 rattles. I took it for bushing

You need to replace the sway bar end links also, they get very noisy but appear fine when they are on the car. Cheap on Ebay.e9253ba.jpg

Posted on Apr 13, 2009

  • 6982 Answers

SOURCE: rear suspension,bushings,2005 jeep liberty

Generally the bushings aren't too expensive (likely about 25-30 each...But, unless you have done this kind of work, driving the bushings out and installing them can be difficult without a press. I've done many in-shop and its nothing like the ones I've done at remote locations using a hammer and chisels etc. You can do this yourself but I'd opt to do the r&r at home and have a machine shop do the actual bushing pressing. If you damage the arm ends you will need to replace the arm or do a bunch of bending to get the bushings back in place.
If you do have a press, than go at it!!

Posted on Aug 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix honda crv rear camber 2007 model tires wearing on the inside?


Replace the suspension bushes on the suspension arm/s. Replace the bushes on the control arms and have a rear wheel alignment done.

Sep 01, 2014 | Honda CRV Cars & Trucks

1 Answer

Does my car have rear control arm bushings?


Yes the 95 Camry has rear control arms and you can buy just the bushings

Mar 13, 2014 | 1995 Toyota Camry

1 Answer

Bushing near passenger side rear wheel is worn out. what is this rod called on a 2001 buick lesabre custom?


most likely called a control arm bushing. yes some can be replaced and others the whole are is replaced.

Sep 01, 2017 | Cars & Trucks

1 Answer

Bushing on rear control arm to spindle


you have replace the control if any bushings has cracked and dry rotton.

Aug 30, 2012 | 2003 Toyota Matrix

1 Answer

Need to know how to replace lower control arm


LOWER CONTROL ARM

REMOVAL
1) Raise and support vehicle. 3) Remove the steering knuckle.
Remove the bolts fastening the power steering cooler to the front suspension cradle crossmember reinforcement (Fig. 21). 5) Remove the lower control arm rear bushing retainer bolts located on each side of each lower control arm rear bushing. NOTE: The bolts fastening the cradle crossmember reinforcement are of three different thread sizes. Note the location of the various sizes.

6) Remove the bolts attaching the cradle crossmember reinforcement to the front suspension cradle crossmember (Fig. 22). Remove the 2 bolts fastening the reinforcement and rear of cradle crossmember to the body of the vehicle. Remove the reinforcement. 7) Remove the pivot bolt attaching the front bushing of the lower control arm to the front suspension cradle crossmember. 8) Remove the lower control arm.

Sep 25, 2009 | 2006 Dodge Caravan

2 Answers

2004 Nissan Quest front control arm bushings


did you try any other part stores. if you don't have a press, you are better off getting the arm. faster and no pulling of the hair. best of luck

Aug 07, 2009 | 2004 Nissan Quest

2 Answers

Lower Control Arm Bushing replacement


Hi,
I just did this job on my 98 regal, and I own the service manuals also. The lower control arm bushing that usually goes, is the front one. The rear one doesn't usually go, it is horizontally mounted. The front one for some reason is vertical. The control arm must be removed, and put in a vise. The front bushings outer metal sleeve, must be driven out with a chisel. It comes out easily. The new bushing can be tapped in with a hammer. Hope this helps!
JOEVETTE

Feb 10, 2009 | 1998 Buick Century

1 Answer

1997 ford thunderbird LX . Rear Wheels - Upper control arm bushings.


Hi...
I 'm a mechanic and have been Replaced the UPPER control Arm bushing on thunderbird.
And the Price for the Bushing is CHEAP..

You need only Replace the damaged parts, not all the ALL HARDWARE, They are wrong.

OK.. you can find on any Autoparts. for EXAMPLE Here is AUTOZONE.
with the Bushings that you need. just look..

http://www.autozone.com/N,14600794/shopping/partTypeResultSet.htm

I hope this help on your question..
Thank you for use fixya..

Sep 24, 2008 | 1997 Ford Thunderbird LX

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...