Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2002 license plate bulbs
its real simple look at the license plates then look up you will see 2 screw per lamp / unscrew them and slide remove its a 194 bulb so get some ready then replace and put back / Please rate my response thank you very much
Posted on Feb 02, 2009
LICENSE PLATE LAMP BULB
Posted on Oct 08, 2009
1. Open the hatch and stand under it.
2. Remove pull handle from the inside of the hatch (2 screws under pop panels).
3. Starting in the lower corners, gently pry the entire interior panel from the hatch,
and leave it hanging from the wiper area near the glass.
4. Grasp the bulb housing and twist to the left while pressing inward.
5. Replace with a 1156 bulb.
Posted on Nov 01, 2009
kind of tricky, took me an hour to get it figured out, but you got to opend the trunk and take out the 10 or so 10mm nuts sticking out of the backside of the lid, then the whole solid piece where the lights are on the back will slide off, then you can change the bulbs above the license plate and put it all back together
Posted on Mar 20, 2010
Tips for a great answer:
Apr 02, 2016 | Mercury Cars & Trucks
Apr 01, 2016 | 2005 Mercury Montego
Sep 01, 2014 | Cars & Trucks
May 08, 2014 | 2006 Mercury Montego
Sep 09, 2012 | 2006 Scion xA
Mar 08, 2011 | 2006 Mercury Montego
Nov 21, 2010 | 2005 Mercury Montego
Jun 15, 2010 | 2006 Mercury Montego
175 people viewed this question
Usually answered in minutes!