Question about Hyundai Accent

Open Question

Want to set timing on hyundai accent 1999 model 130xs

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

fastboyz
  • 674 Answers

SOURCE: 2002 Hyundai Accent Problem

first thing i need to know is did the timing belt break?
second is are you sure you aligned the timing marks and after the belt tensioner was tight you rechecked to make sure the timing stayed where you had it.
next step would be a compression check to if a valve was bent whenchanging the belt
i have seen this happen and this engine is an interferance engine.
later paul

Posted on Sep 28, 2008

  • 566 Answers

SOURCE: hyundai accent, location of fuel cut off

hi from uk location of fuel safety shut off valve/switch on uk r/h drive accents is on the engine bay bulkhead in front of drivers side it is a square box with red rubber top press button may be on opposite side on l/h drives ? if activated? just press button till click ? to reset these normally only cut off on impact ? to stop elec fuel pump continuing delivering if involved in an R.T.A fire prevention

Posted on Jan 08, 2009

  • 69 Answers

SOURCE: changing timing belt on 2004 hyundai accent

Sign up for an account on hmaservice.com. Once you do so, log in and click on "Shop". You can then enter your year/make/model and you will find the info under, engine mech. system>timing system>timing belt>repair procedures. Very detailed, and best of all, FREE.

Posted on May 27, 2009

  • 2 Answers

SOURCE: drivers electric window doesnt work,

I had the same problem with mine- got a second hand switch relay(cost £10) off EBay and fitted it - dead easy just two connectors and all fine now ! Prior to gettibng the new switch I just used to hit the button with heel of my shoe to close it when stuck - worked for me :o)

Posted on May 30, 2009

  • 1 Answer

SOURCE: how do i set timing marks on hyundai accent 1.5 eng

how do i set timing on 1999 hyundai accent an which one is the number one cylinder.?

Posted on Dec 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a hyundai accent 130xs, 1998 model the car revs up for a couple of seconds then just cut out,don't want to idle.what could the problem be


Vacuum leaks usually cause a symptom such as yours, check all vacuum lines for being loose, damaged, or cracked.
check link below for more causes, press the helpful button
Solving Automotive Idle Problems

Jan 20, 2016 | Hyundai Cars & Trucks

1 Answer

I have a hyundai accent 130xs,the car revs up for a couple of seconds then just cut out,don't want to idle.what could the problem be


Vacuum leaks usually cause a symptom such as yours, check all vacuum lines for being loose, damaged, or cracked.
check link below for more causes, press the helpful button

Solving Automotive Idle Problems

Jan 20, 2016 | Hyundai Cars & Trucks

1 Answer

I have a hyundai accent 1.3 1999 model, it jst stop while the engen was running, went to mechanic to check the wiring, he recomended I buy new distributor, I bought it as well as new coil nd plug cable but...


check that the timing belt is not broken
It would have been the first thing a good mechanic would have done
the second thing would have been to run the fault codes to get the fix right.

Mar 24, 2015 | 1999 Hyundai Accent

1 Answer

What is the 1999 hyundai accent engine cylinder sequence number? where is the cylinder # 1 located? i have 1.5 ltr. 12 valves 4 cylinder. thanks.


For 1999 Hyundai Accent GS 1.5 liter SOHC L4 check this...

zjlimited_84.gif


Hope this helps (remember to rate and comment this).

Dec 28, 2010 | 1999 Hyundai Accent

1 Answer

My 1997 accent 130XS came without a heated rear window. I have checked and seen that the wiring is in place, behind the dash and at the rear window, other than replacing the rear window and fitting the...


You may need to install a 20amp fuse in solt #6 if there isnt a fuse already there, also the only other thing is a rear defogger timer behind the leftside of the dash, besides that you have the glass and the switch,wiring is in place, the timer may also be there, but if not thats the only other thing you will need, heres a wiring diagram to help, good luck.cd04c62.gif

Apr 10, 2010 | 1999 Hyundai Accent

2 Answers

Main beam not working on my hyundai accent coupe


Problem is either wiring or the bulbs... evident.

Oct 19, 2009 | 1999 Hyundai Accent

2 Answers

How do i set timing marks on hyundai accent 1.5 eng


how do i set timing on 1999 hyundai accent an which one is the number one cylinder.?

Oct 02, 2009 | 2002 Hyundai Accent

1 Answer

How do I time my 1999 hyundai accent?


theres no dist. on it,timing is controlled by ecm! the only way timing is off is from defect.sensor,worn or damaged timing belt or badly installed timing belt!

Jun 26, 2009 | 1999 Hyundai Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...