Question about 1994 Toyota 4Runner

2 Answers

Need a diagram for 94 3l diesel hilux timing belt replacment pls.

I changed the timing belt and lined up all the timing markes on the crank,cam and feul pump, but no dice! must have made an error as the crank chewed the lobes off the belt. would love to get my hands on a detailed diagram! I'm hopeing i haven't caused catastrophic damage to poor old dads pride and joy!

Posted by on

  • paul_alley Feb 07, 2009

    thanks but its deisel but have sorted and its up and running now cheers

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Can anyone help me with a diagram or how to solve a timing replacement on a 1990 toyota hilux

Posted on Feb 28, 2010

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 33 Answers

Hello Paul
I hope this help you
need a diagram for 94 3l diesel hilux timing belt  - 6a737ed.jpg Regards Paul
www.limotec.co.uk
If you need more please contact me

Posted on Jan 13, 2009

  • Paul Huckle
    Paul Huckle Feb 07, 2009

    Hello Paul

    Sorry that was for a 3ltr Landcruser

    Paul

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi can u pls assist me with the timing marks for this car chevy aveo 1.5 engine 8 valve 2006 model hatch back pls urgently & also head bolts torque setting


Your timing marks should be on the belt. There are two single lines and one double line across the surface of the belt. Each of the single lines line up with the cam shaft and the balance shaft drive gears. The double line lines up with the crank gear. If I remember right, there is a small mark on the oil pump housing that the crank mark lines up with and the cam mark is straight up and there are 2 other marks on the cam gear that line up with the head.

Jun 05, 2015 | 2006 Chevrolet Aveo

2 Answers

93 Toyota 1hz hzj80 Replaced diesel fuel pump but had to take timing cover off due to oil leak and fuel pump gear fell out Reassembled and lined up the gear but got to stage of putting belt back on and...


The pistons are hitting the valves due to wrong alignment of timing gears and the timing belt. Align the timing gears and timing belt marks according to the following diagrams.
4078e610-1348-408e-8c96-f8a4cdb60c29.png
412c965e-8a51-4d30-b506-1ddfa17eeaf4.png
Good luck.

Mar 08, 2014 | Cars & Trucks

1 Answer

Faulty timing belt on a 1993 toyota 4X4 hilux with a 2.8D motor.


Ready? Remove all the stuff in the way of the old belt. Radiator, pulleys, belts, covers, have a new tensioner to put on? How about that water pump? Get a socket big enough for the crank pulley bolt, you just want to turn the engine over a little. Get the new belt with marks on it, they come in real handy, and when you are ready to let the old one go, bring the motor around to tdc. There is a mark on the crank pulley, when that aligns, the cams should be on their marks as well, clamp the cams from moving, they are under spring tension, they won't go far, but just in case, remove the belt, line up the new one with the marks on it to the marks on the cams and the crank, pull the pin on the tensioner, and you should be all set. Put it all back together, fill the radiator back up. Hope this helps.

Mar 31, 2010 | 1993 Toyota Xtracab

1 Answer

I accidently removed the cam belt without marking it. i have a 1991 legacy ej20 non turbo quad cam and wounder if anyone had the timing mark diagram i could use to help line everything up. cheers


As long as the timing marks on the cams are lined up with the marks on the head ( And the crank is lined up as well - marks on the block - TDC) then the belt should be lined up correctly, however, if you do need the marks, a new belt should have them and they aren't too terribly expensive - ($25.00) - You could also take your belt and a little bottle of white touch up paint (Or magic marker you can see)to the parts store and transfer the marks from a new belt to your old belt, but if it had any miles on it ( 10K+) I'd go ahead and replace it if I were in there that far...-

Aug 22, 2009 | Subaru Legacy Cars & Trucks

1 Answer

Timing is off


just get a new timing belt the marks will be on it point the arrows toward the front of the truck and line the marks on the cams and crank with the lines on the belt there will be a dimple on the cams and crank those are the timing marks good luck

Apr 07, 2009 | 1992 Nissan Pathfinder

2 Answers

I need a diagram for the timming belt for a daewoo nubira 2000


what model ?? 8 valve?? 16 valve?? petrol ?? diesel?? .Remove np one spàrk plug and put a long thin screwdriver into hole and turn engine till the piston is at the top and then look for timing marks ,if you still cant see them paint the cam gear .with a couple of spots of white paint ,the lower crank mark it when the keyway points at the top of bottom of the engine.If i remember rightly these opel engines have the timing mark as a white line on the belt .But mark it anyway and always rotate the engine 360% by hand to make sure the valves clear and you have it right

Mar 20, 2009 | 2000 Daewoo Nubira

1 Answer

2000 vw passat changed cam belt timed and no diesel coming throug


never had a problem after a belt change, are you sure the crank hasnt moved and if it is the pd engine they need to be bang on or it wont go!! what timing mark did you use for the crank ?

Jan 24, 2009 | 2002 Volkswagen Passat

1 Answer

Need 2 no where timing marks are for 86 hilux 2188cc diesel


Hey NewK, Try looking under the Cam Pully If ya got the radiator out Its at the lowest point Fuunyist thing I ever seen but thats where it is. Heres a tip if ya radiator is still in the vehical Use a small mirror to help you see the Underside of the pully......................Tight Nutz, Donkuz.

Jan 02, 2009 | 1995 Toyota 4Runner

3 Answers

Timing Belt Replacement+Diagram


No it will NOT bend valves on this particular engine, if it goes out of time. I would replace BOTH the timing belt and the drive belt at the same time, since both are very inexpensive, even from the Ford dealer. Line up both timing marks on both the cam and crank sprockets in the 12 o'clock position. The marks are very easy to see, once you remove the timing belt cover. Hope this helps.

Jun 22, 2008 | 1991 Ford Escort

Not finding what you are looking for?
1994 Toyota 4Runner Logo

2,366 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...