Question about Toyota Corolla
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
OK. On the front edge of the seat bottom cushion, pull up hard, both sides. This will dislodge the 2 clamps that holds the seat cushion to the floor. Pull the seat cushion out & set it aside. You will now see the female latches bolted to the area where the rear of the seat cushion meets the rear seat back bottom. Remove the bolts (14 mm I think).
Posted on Oct 07, 2008
SOURCE: 2004 TOYOTA COROLLA TRUNK
I have a corolla 2003 and I had the same problem. I turned the key to the left and the lock turned left, engaging the valet parking mechanism. I could not turn the key to the right and could not get access to the trunk because the lever next to the driver seat was disengaged.
The way I solved this problem is as follow:on the back driver seat I pulled the back seat forward to leave an opening and snick my arm in the trunck. Then I grabbed the cable used to latch the seat and I pulled forward, i.e. toward the front of the car. The cable is connectred to the trunck so that it can be disconnected easily if pulled towards the front. If you pull towards the back it will remain attached to the trunck. So grab the cable an pull towards the front, and it will release itself. Since the cable is flexible, you can pull it out of the trunk from the same the opening you put your arm, and then disenagage the driver back seat. Fold forward the back seat and get into the trunk and use the lever in the latch of the trunck to open it. The turnk will open.
If the lock does not turn, you need to disconnect the lock from the mechanism, so that the driver seat lever can start working again. To do this, and with the trunk open, remove the cover holded by nine plastic pins. Do not break the pins. After removing the cover, you will see the lock holded by two nuts. Remove the nuts with a rachet. The lock will be loose, and disconnect the lever that connects the lock to the latch. At this point the driver seat lever will start working again. Close the trunk and verify that the driver seat lever opens the trunk. Now you can open and close the trunk , and have time to call the dealer for a new lock.
Posted on Oct 13, 2009
SOURCE: 2003 Toyota Corolla. Trunk
The trunk latch is not adjusted correctly. I suggest that you losen the bolts that hold the bottom latch and slide it up about 1/8 to 1/4. Then try it. Keep adjusting it till it latches. That should do the trick. Good luck.
Posted on Nov 25, 2010
If it has a trunk release it sounds to be frozen..Also some close themselves electrically...But I am sure you would know if it is electric or not..If not check for a trunck fuse in the fuse box or the owners manual would be the best...If it is a manual trunk and is stuck or frozen you should be able to move the trunk latch with a big flat prybar...And if it is out of alignment the adjustment is at the striker that is mounted to the lid and not the latch itself....Hope thhis helps......Metalpoet
Posted on Apr 17, 2011
Tips for a great answer:
Feb 01, 2013 | 2008 Toyota Corolla
Jun 30, 2012 | 2010 Chrysler Town and Country
May 25, 2012 | 1991 Toyota Corolla
Mar 10, 2017 | 2007 Toyota Camry
Mar 10, 2017 | 2007 Toyota Camry
Jul 11, 2011 | 2010 Toyota Corolla
Jun 05, 2011 | Toyota Camry Cars & Trucks
Jan 06, 2011 | 1992 Toyota Corolla
Nov 25, 2010 | 2004 Toyota Corolla
May 08, 2009 | 2003 Toyota Corolla
163 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: