Question about 1988 Toyota 4Runner
I cant compression start my 1988 toyota 4runner
Is it a Toyota remote start, or an aftermarket remote start? If it is a Toyota remote start, make sure the hood and doors are all closed. press lock twice, then press lock a 3rd time and hold it for 3 or 4 seconds. It then should beep once, and a few seconds later start up. OR the lights will flass once, twice, or etc. Usually this means there's something wrong and the number of flashes is a diagnostic code of sorts. If this is the case, take it in to your dealer for further assistance. This part should be covered under the 3/36000 warranty.
If it is an aftermarket system, it will probably be a similar situation. It may be a misadjusted hood pinswitch, or even some blatent mistake the installer made installing it.
Posted on May 31, 2009
could be a dodgy motor but i would check to see if the channel that the regulater runs in is free of dirt and well greesd!
Posted on Apr 17, 2010
Tips for a great answer:
Jun 06, 2015 | 1993 Toyota 4Runner
Oct 02, 2013 | 1988 Toyota 4Runner
Apr 24, 2010 | 1988 Toyota Supra
Dec 01, 2009 | 1988 Toyota 4Runner
Feb 08, 2009 | 1988 Toyota 4Runner
Jan 28, 2009 | 1990 Toyota 4Runner
61 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: