Question about GMC Jimmy
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hello cman0906: My name is Roger and I will answer your question. The fire order is 1 5 6 4 3 2. See picture. Please rate the answer you recieved. This way we know your answer was correct. Should you need further halp please just ask. Thank You for using Fix Ya. Roger
Posted on Jul 31, 2009
SOURCE: firing order for a 1986 gmc s15
To avoid confusion, ALWAYS replace spark plug wires one at a time.
The most important thing to remember about the removal and installation of a distributor, cap or spark plug cable is that all wires MUST be labelled before they are disconnected. Keep in mind that these figures depict a firing order where the distributor cap terminals are relative to EACH OTHER only and they do not necessarily depict the tower positions in relation to the rest of the engine. This is true because any distributor which has been removed and reinstalled may have been installed with the No. 1 spark plug tower at any position (360 degrees) in relation to the rest of the motor, as long as the rotor aligned to the No. 1 tower when the No. 1 cylinder was at TDC of the compression stroke (valves closed, ready for the plug to fire). As long as the remaining wires were connected in the correct firing order sequence (depending on direction of distributor rotation) the engine will run. DO NOT EVER remove more than one wire from the distributor cap at a time unless you tag ALL wires and towers to assure proper installation.
Fig. 1: 1.9L engine . Firing order: 1-3-4-2 . Distributor rotation: counterclockwise
Fig. 2: 2.0L engine . Firing order: 1-3-4-2 . Distributor rotation: clockwise
Fig. 3: 2.5L engine . Firing order: 1-3-4-2 . Distributor rotation: clockwise
Fig. 4: 2.8L engine . Firing order: 1-2-3-4-5-6 . Distributor rotation: clockwise
Fig. 5: 4.3L engine. Firing order: 1-6-5-4-3-2 . Distributor rotation: clockwise
I hope help you with this (remember rated this help) Good luck.
Posted on Oct 05, 2009
For this models:
1986 GMC S15/T15 4WD P/U 2.8 liter V-6 VIN "R"
1986 GMC S15/T15 4WD Jimmy 2.8 liter V-6 VIN "R"
1986 GMC S15/T15 2WD P/U 2.8 liter V-6 VIN "R"
1986 GMC S15/T15 2WD Jimmy 2.8 liter V-6 VIN "R"
Hope helped woth this. Remember rated this help. Good luck.
Posted on Nov 24, 2009
SOURCE: what is firing order for
Pay a visit to Autozone.com and follow the instructions to enter your vehicle into the system . Then , select vehicle repair info / guides and you will find your firing order in tune up specifications . Also , you will find a lot of other useful information . It's free . Good luck . And be safe .
Posted on Sep 05, 2010
Tips for a great answer:
Aug 20, 2016 | GMC Sonoma Cars & Trucks
Aug 05, 2010 | 1993 GMC Jimmy
Jul 15, 2010 | 1984 Chevrolet S-10
Mar 28, 2010 | 1995 GMC Sonoma
Jan 19, 2010 | 2000 GMC Jimmy
Nov 24, 2009 | 1986 GMC S-15
Jul 31, 2009 | 1988 GMC S-15
May 31, 2009 | 1988 GMC S-15
Dec 04, 2017 | 2002 GMC Envoy
82 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: