Question about Mazda MPV
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Mazda MPV 2000
Try "resetting" your keyless entry code. Which is a fancy way of explaining that I broke my keyless entry key fob and had to order a new one. It came w/ instructions explaining how to get the new fob to speak to the car's computer. It was weird (turn key on and off 3 times, open and close door three times, etc. **I'm sure my neighbors were watching and laughing**), but it worked. I'll scan and email you the insrtuctions if you wish. Dan: email@example.com
Posted on Sep 29, 2008
SOURCE: mazda 2003 MPV door locks
I just fixed this same problem. It happened to me 3 different times in
a month so I got good at it. Before you dive into removing your door
try this. Pull the door handle and release it letting it snap back
several times. The problem is a half open door latch that won't let the
door unlock. Do this as aggressively as you can to attempt to get the
latch to return to its original position. Check the door lock between
Ok, if that didn't work, here is how to remove the door.
1. Remove the screw behind the door latch, you will have to pop the plastic cover off first.
2. Remove the rubber insert in the door handle
3. Remove the screw that is now visible
4. Now remove the window/lock control module, the back is free but the front has a plastic lip so lift the back up and pull towards the back of the van.
5. Remove the clips that attach to the lock and to the window controls (these can be a pain)
5. (Optional) Remove the bracket that held the window/lock control module
At this point your door is basically free, it is only held in place with plastic clips that can be easily forced off. If your door were open you would simple pull the bottom of the door out (hinged at the window) and lift it off. But since we can't pull because the door is closed we have to force it out.
From here it is pretty simple. Move the seat all the way back and tip the seat way back. Lift the door panel straight up. You will be breaking 2 plastic clips from the rear part but once you do it just pulls out. This is not that easy because the space is limited but just keep pulling and force the rear end of the door panel past the b-pillar. Once you do this it is free.
Have fun and try to keep the black gook from getting everywhere.
Oh, to fix the door lock just oil/grease it and manually move the mechanism several times.
Posted on Nov 11, 2008
sounds like the lock is seized, you will have to remove the panel,it's held on with screws and snap plugs, remove all the screws and then gently pull the panel off. you will be able to open the hatch by sliding the lever sideways. the latch and mechanical lock are the same unit. it has a electrical actuator. your dealer or regular tech sould be of great help in this very simple matter.
Posted on Nov 18, 2008
Typically an alternator is an easy fix. It requires removal of the belt from the engine running it, and a few bolts that attach it to the engine.
Because of the engineering with the 2000 mpv, it is a very difficult fix, and one that requires removal of the transaxle and exhaust manifold, as well as removal of the lower engine mounts. It will take a qualified Mazda mechanic 3.5 hours to do the fix - you can (at least) triple that amount of time as a DIY project (assuming you have the right tools).
Posted on Nov 02, 2009
the IAT sensor is part of the Mass Airflow sensor. here is a picture of that sensor.
Posted on Dec 16, 2009
Testimonial: "nobody where i lived could tell me this so thank you emissionwiz"
Tips for a great answer:
Dec 19, 2014 | 2003 Mazda MPV
Aug 01, 2010 | 2000 Mazda MPV
Dec 15, 2009 | 2000 Mazda MPV
Jun 24, 2009 | 2002 Mazda MPV
Dec 06, 2008 | 2000 Mazda MPV
Jul 07, 2008 | 2000 Mazda MPV
43 people viewed this question
Usually answered in minutes!