Question about 1992 Daihatsu Charade

Open Question

Daihatsu siria 3 cylinder firing order - 1992 Daihatsu Charade

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 98 Answers

SOURCE: how to rebuilt the cylinder head of daihatsu charade 3 cylinder engine

Which motor?

Posted on Sep 04, 2008

johnny5846
  • 379 Answers

SOURCE: firing order of a daihatsu charade 3cyl 1995 model

here is the firing order in picture form .
e2ff599.jpg
J5

Posted on Jan 21, 2009

mx5turbo92
  • 545 Answers

SOURCE: what should the valve timing be on a 1990 daihatsu charade 1990 3 cylinder

Ignition timing should be checked and adjusted whenever spark plugs are replaced or any distributor maintenance is performed. Ignition timing at 1000 RPM or less should be as follows: on 1989 1.3L/4-79 engines, 3-7°BTDC; on 1990-92 1.3L/4-79 engines, 0-2°; on 1.6L/4-97 engines, 1-5°.

Posted on Jun 03, 2009

Obertelli
  • 3006 Answers

SOURCE: In what order do you set tappets on a 850cc 3

I haven't personally worked on the Charade before, but the process on all 3 cylinder engines is the same.

The firing order is 1-3-2 and because there is an odd number of cylinders you will never get a situation where the inlet/exhaust valve on cylinder x is fully closed leaving the inlet/exhaust on cylinder y fully open (in contrast to engines with an even cylinder count).

Instead, you just choose whether to start with the inlet or exhaust valves first and then adjust cylinder 1. You then turn the engine over by hand until whichever valves you chose to start with are fully open on no.3 and adjust those and then the same on no.2. Starting again at no.1 you then do the remaining valves, so if you started with the exhaust valves, now you do the inlets.

Hope this helps, if so please return the favour by taking a moment to rate my answer.

Posted on Feb 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I get a manual for some model Daihatsu?


take no 1 plug out and watch the rockers for no 1 piston when the rockers are both on the back of the cam , ( valve clearance ) place a piece of wire in the plug hole to touch the top of the piston and as you carefully move the piston towards tdc the wire will move out until you get to a point where it starts to move back in
At the point where the wire moves out or in as you rock the crank at that point the TDC marks should be lining up
That is tdc no1 piston firing
also look at the other rockers and see which one is moving up (exhaust) and the other down (inlet) and that is the next piston to fire

Feb 23, 2016 | Daihatsu Cars & Trucks

1 Answer

What is the timing and firing order for 1990 diahatsu charade


Firing order is 123 with 1 being the side farthest from the distributor.

Jan 16, 2014 | 1990 Daihatsu Charade

2 Answers

Putting spark plugs in a charad 1997 wat is the firing order they go in please


Dont tell me you removed all the wires at once without marking them? :O
The best advise for that is, to remove one wire and plug at a time then replace the plug, and connect the wire back in place to avoid mix ups...
I have spec tables for that car, but you need to help me with the model, whats the year model, 92 or 97?

Aug 19, 2011 | 1992 Daihatsu Charade

1 Answer

Where can I buy the starter of daihatsu charade and how much it will cost?


special order from autozone 75.00 for the 3 cyl, and 120.00 for the 4 cylinder. Salvage yard is a possibility also and Ebay

Apr 06, 2011 | 1991 Daihatsu Charade

1 Answer

WHAT IS THE FIRING ORDER FOR A 1998 FORD EXPLORER


google "ford explorer firing order"

4.0L OHV Firing Order Firing order for the 4.0 liter OHV V6 is
  • 1-4-2-5-3-6
http://autorepair.about.com/od/enginefiringorders1/ 4.0L SOHV Firing Order Firing order for the 4.0 liter SOHV V6 is
  • 1-4-2-5-3-6
http://autorepair.about.com/od/enginefiringorders1/ 5.0L Firing Order Firing order for the 5.0 liter V8 is
  • 1-3-7-2-6-5-4-8
http://autorepair.about.com/od/enginefiringorders1/ How to Find the Cylinder Order V6 When standing in the front of the vehicle the cylinders are numbered 1-3 up the passenger's side and 4-6 up the driver's side. How to Find the Cylinder Order V8 When standing in the front of the vehicle the cylinders are numbered 1-4 up the passenger's side and 5-8 up the driver's side.

Jun 07, 2010 | 1998 Ford Explorer

1 Answer

In what order do you set tappets on a 850cc 3 cylinder daihatsu engine?


I haven't personally worked on the Charade before, but the process on all 3 cylinder engines is the same.

The firing order is 1-3-2 and because there is an odd number of cylinders you will never get a situation where the inlet/exhaust valve on cylinder x is fully closed leaving the inlet/exhaust on cylinder y fully open (in contrast to engines with an even cylinder count).

Instead, you just choose whether to start with the inlet or exhaust valves first and then adjust cylinder 1. You then turn the engine over by hand until whichever valves you chose to start with are fully open on no.3 and adjust those and then the same on no.2. Starting again at no.1 you then do the remaining valves, so if you started with the exhaust valves, now you do the inlets.

Hope this helps, if so please return the favour by taking a moment to rate my answer.

Feb 04, 2010 | Daihatsu Charade Cars & Trucks

2 Answers

Firing order of a daihatsu charade 3cyl 1995 model


If you find this Info Helpful Please Rate Me as It Helps me to reach the Expertise STATUS that I have Worked 30yrs to get to LoL Thank You Very Much and Have a Great Week!!



Firing Order: 1 - 2 - 3
Base Ignition Timing
Note: With the T terminal Shorted.5 +/- 2 deg BTDC
Ignition timing should be checked and adjusted, if necessary whenever spark plugs are replaced or any distributor maintenance is done. Ignition timing should be 3-7°BTDC at 750-850 RPM with the engine check connector terminal 11 (brown) shorted, Fig. 1. The engine check connector is located near the top of the transaxle.

Jan 21, 2009 | 1992 Daihatsu Charade

Not finding what you are looking for?
1992 Daihatsu Charade Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daihatsu Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Are you a Daihatsu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...