Question about 2008 Honda Civic

1 Answer

2008 civic where is washer pump fuse

No sound from washer pump motor. No listing in manual for washer pump fuse. Wipers still work

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 5,494 Answers

The pump may use same fuse as the wipers. Check for power at the pump connector or hot wire the pump with jumper wires from the battery. If you have power at the pump when the washer button is pressed, likely a bad pump. Or if you hot wired it and the pump works, check for a fuse or switch problem or bad wires.

Posted on Dec 10, 2012

  • Dave Hebuck Dec 11, 2012

    Thanks Montehammons

×

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1746 Answers

SOURCE: windscreen washers stopped working. all fuses ok,wipers working ok.front & back washers not working

Hi, First check that you have wash liquid in tank. second make sure that it will not freeze by putting alcohol in your mix of water and soap. You can buy it already mixed at most service stations. Check pump for corosion on contacts.
Good luck.

Posted on Dec 15, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I turn the switch to my 2006 Cadillac DeVille CTS windshield wiper it does nothing no sound no movement what is wrong


Hard to say what's wrong without testing thing's . Is there B+ voltage to the wiper switch ? B + voltage to the wiper motor ? Do you know how to use a voltmeter ? How to test electrical circuits ?
Here is a factory service manual list of componets involved .
Wiper/Washer System Components
The Wiper/Washer System consists of the following electrical components:
• Accessory relay
• Heated washer nozzles w/XA7
• WASH NOZ 10A fuse
• Windshield washer fluid level switch
• Windshield washer pump motor
• Windshield wiper motor
• Windshield wiper motor module
• Windshield wiper/washer switch
• Wiper/washer switch 10A fuse
• Wiper motor 30A fuse

Do you know how the wipers work ?
Windshield Wiper Motor Wiring Tutorial
Wipers Inoperative - All Modes ?????
Wiper Motor Switch Troubleshooting

Sep 05, 2017 | Cadillac Cars & Trucks

2 Answers

2004 Pontiac Grand AM windshield wipers work but washer does not come on or pump fluid. Cannot hear pump running. Cannot find a reference to a fuse for the wiper pump. i have replaced pump.


Could be that the switch that activates the washer pump is not closing and that explains why the pump is not working. That has a separate switch from the wipers because you only activate it on demand.

Aug 09, 2015 | Pontiac Cars & Trucks

2 Answers

Windshield wipers


Would need to scan vehicle to insure the wiper speeds are controlled by the General Module or a wiper intermittent relay....if relay...would locate and replace...if general module.....a reprogram or software update could be in order...possibly replacement.

Scott, Porsche Master Tech 35 years

Jan 12, 2014 | 2002 Jeep Liberty

1 Answer

Windshield washers


First listen for the pump. If no sound, check fuse, connection and voltage at the pump. If you have voltage to the pump, and it doesn't work, have it replaced.

Nov 22, 2013 | 2008 Chevrolet HHR 2.2

1 Answer

What fuse controls the washer fluid pump?


On some older cars the washer motor circuit is tied into the wiper circuit, so the large fuse or relay for the wipers also controls the washer motor.
Don't know about your car, but you could take the connector off your washer motor and check for power there, when someone holds the washer pump switch on, and key on.

Nov 16, 2011 | 2008 Hyundai Accent

3 Answers

My wipers & wiper wash dont work


First and for most, check the fuse, that has probably burnt out. I am pretty sure that is the issue. Next if after finding fuse in panel , and replacing it, still don,t work, then next step would be checking washer/wiper motor. Thanks, please let me know, mike from fixya

Jun 10, 2011 | 2008 Saab 9-3

4 Answers

My 2004 Ford Expedition will not spray windshield wiper when the button is pushed. The wipers do turn on, but no spray. Would this be caused by a fuse (the wipers do turn on) or is the motor bad?


Can you hear the washer pump running when you operate the washer switch? The washer pump is in the bottom (side) of the washer fluid reservoir. You should hear it running. If not, you can disconnect the wire connector at the pump and use a test light to check to see if there is power and ground at the connector when you operate the switch. If there is power and ground, replace the washer pump motor. If there is no power or ground, you most likely have a bad washer control switch. (You have to replace the entire Multifunction Switch)

If you can hear the pump running, check for washer fluid pouring on the ground. If this is the case, you have a broken hose between the washer pump and the jets that spray on your windshield.

Also note that there is no way possible that your problem could be CAUSED by a fuse!
For more information on this subject, please review this article: Where's The Fuse?

May 17, 2011 | 2004 Ford Expedition

1 Answer

Washer fluid will not work, it is filled, no leaks, fuse(only found one) is ok. but the wipers work just no fluid will come out. what could be the problem?


more then likely it is the motor that is bad or the plug may be bad. located on bottom of filler. Good Luck Tim

Aug 27, 2010 | 2008 Honda Civic

1 Answer

Winshield washer pump has stopped pumping on 1996


Sounds like pump alright Unbolt tank from car and pump should be screwed to bottom of tank Another way is fit a universal inline washer pump Up to you whether you want to keep your car original

Oct 22, 2009 | 1996 Audi A4

3 Answers

Can't find fuse for windshield wipers in 2008 Ford Crown Victoria.


Fuse no. 7(10amp) in interior fuse panel and fuse no.110 (30amp) in underhood fuse panel

Mar 02, 2009 | 2008 Ford Crown Victoria

Not finding what you are looking for?
2008 Honda Civic Logo

547 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...