Question about 1997 Nissan Maxima

Open Question

Where is the eccs relay on a 1997 nissan maxima

Need to know where the eccs relay is and what does it do. have a dtc 1320,need to start somewhere.have replaced all 6 coils front and rear crank sensors spark plugs ignition switch.car runs great but sometimes when i shut it off will not restart untill it sits for a little while

Posted by on

  • Gary Weber
    Gary Weber Dec 12, 2012

    does ant one know the answer to this question without having to pay justanswers 38/50 dollors

×

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
frcs68
  • 1605 Answers

SOURCE: i got 1995 nissan maxima

The knock sensor error could be the sensor, sensor circuit, or some misfire caused by a dirty/bad injector or some ignition problem.

One issue that might tie it all together is coolant leak causing the misfire/knock like a head gasket, but I think you would be throwing more codes or you would see more problems than what you have.

Posted on May 19, 2009

Ad
  • 29 Answers

SOURCE: My 1997 Nissan Maxima will not start. It's not

If the spark plugs aren't firing then you just have to follow it backwards. the spark plugs should be connected to a coil or distributor. The problem could be there.

Posted on Oct 02, 2009

  • 1 Answer

SOURCE: CAR WONT START 1995 NISSAN MAXIMA GXE V6 REPLACED

it might be in your ignition still try turning it from the first click acc to stat and dont stop on the on position thats how mine is

Posted on Feb 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

There are 4 relays in the in dash fuse box of my 86 nissan maxima the 2 on the left are melted and i dont know what they are 4


If it is the same as a Nissan Sentra, and Nissans were pretty standard, those two would be the accessory relay on the far left and the ignition relay next to it. The other two relays are the fuel pump relay and the ECCS relay (for the engine computer operation).

Does the engine still start and run? The ignition relay doesn't affect engine running. It's primary purpose is to power up that portion of the fuse block that the accessory relay does not cover, like the dash gauges and warning lights and turn signals, a few other too, I think..

Aug 27, 2015 | 1986 Nissan Maxima

1 Answer

2007 nissan maxima won't start until it gets colder.


-It could be injector's relay. Fuel pump relay. (It works when still cold
but not work when it's hot or warm)

Mai

Apr 03, 2013 | Nissan Maxima Cars & Trucks

1 Answer

Hi i have a 2000 nissan maxima ai it keep geting a code 1320


Hi

1320 This is an ignition coil may have gotten wet or could be faulty very common fault on this car, sometimes you can disconnect the battery for 5 minutes and it will reset the cars computer thats if you have an engine light on, 1320 would normally cause a misfire and in most causes you have to buy a new coil.

Hope this helps

Regards

Dan

Jan 01, 2011 | 2000 Nissan Maxima

1 Answer

Car is mis firing codes P0303 and P1320 came up any ideas Its a 1999 Nissan Maxima


yeah start with the coil on #3 cyl but the 1320 code means acording to nissan all coils should be replaced but to save money start with # cyl

Mar 19, 2010 | 1999 Nissan Maxima

2 Answers

No spark


try checking your Distributor cap maybe even the timing belt. If there is no spark has to be either or one of those

Mar 09, 2010 | 1997 Nissan Maxima

1 Answer

Problem code p1320 came up on my diagnostic


sounds like one of your ignition coils are starting to fail, try and find a good price for all 6 on ebay

MIL (check engine light) "ON" with DTC P1320 stored in the ECM Intermittent spark knock (detonation)
  • Check the ECCS wiring harness for a broken or damaged wire.
    1. If the ECCS harness has a broken or damaged wire that is causing the symptom(s) noted above, repair the harness and verify the incident is resolved.
    2. If the ECCS harness does not have a broken or damaged wire and is NOT causing the symptom(s) listed above, proceed with step 3 below.
  • Replace ignition coil(s) with the one(s) listed in the Parts Information table, and verify the incident is resolved.


  • Nov 28, 2009 | 2000 Nissan Maxima

    1 Answer

    I have a 1997 nissan maxima and when i try to start it it will not say anything


    try to check the battery if voltage is adequate. If it checks out OK, you may want to check on the connections, the ground wires and wiring that leads to the starter, the starter relay and the ignition. It may also be the starter relay.

    Jul 08, 2009 | 1997 Nissan Maxima

    1 Answer

    I need to troubleshoot dtc p0325 & p1320 on a 1997 Nissan Maxima GXE?


    Hi,

    The two codes seem to be related. The P0325 description is knock sensor circuit malfunction and the P1320 is ignition signal - circuit malfunction.

    I'll summarize and then give links on more detailed articles I found. Basically the P0325 refers to the knock sensor and associated wiring. The P1320 refers to the ignition coil and wiring. Check the sensor, coil, and associated wiring.

    I found some great articles:
    P0325 - http://www.obd-codes.com/p0325
    P1320 - http://autorepair.about.com/library/a/1i/bl039i.htm

    Good luck!

    Oct 19, 2008 | 1997 Nissan Maxima

    2 Answers

    I just bought a 1997 nissan maxima. It will not start. I took it to the mechanic I have used for years. He doesn't specialize in Nissans. He said That the relay from the BSM module is not getting the...


    engine need air,fuel,spark and timing to run,if you dont have one of these,obviousley it wont run,are you mechanically inclined to check these?if not,i recommend taking to a shop that does specialize in nissans

    Aug 12, 2008 | 1999 Nissan Maxima

    1 Answer

    1997 nissan maxima


    Yes that will be one of the option that you can do changing the ignition lock....

    Good luck...

    Aug 05, 2008 | 1997 Nissan Maxima

    Not finding what you are looking for?
    1997 Nissan Maxima Logo

    Related Topics:

    123 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Nissan Experts

    yadayada
    yadayada

    Level 3 Expert

    76630 Answers

    Phil Lovisek
    Phil Lovisek

    Level 3 Expert

    726 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Are you a Nissan Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...