Question about Cars & Trucks
How do I start this project
Have a shop with a lift-- do it
Removing a transaxle verses a rear drive is not
a driveway job
Very dangerous & you don't have the ground
clearance necessary to remove the trans
Posted on Dec 10, 2012
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hello, You remove the headlamp assembly by removing the 3 bolts that hold it in place. The bolts are #1 in the following picture:
Posted on Oct 23, 2008
SOURCE: 2002 Dodge grand caravan
It would appear that the relay is located on the cross rail that runs across the front of the vehicle (in front of the radiator). I found out that it is riveted in place by a single rivet, so in order to replace mine, I will have to remove the rivet and use a self-tapping screw to secure a new one.
The fan relay is located in the fuse panel located under the hood beside the battery. It will be marked under the lid. Make sure you check the maxi fuse for the fan also.
Posted on Mar 02, 2009
------>>>FRONT>>>>of Van >>>>
#5 cyl #6 cyl
#3 cyl #4 cyl
#1 cyl #2 cyl
I COIL BLOCK I
I #3 #1 #5 I
I I Firing Order Is
I I 1 2 3 4 5 6
I #6 #4 #2 I
the Wires Go Accordingly to prospective Terminals, So Sorry Unable to Send Pics through FixYa, A Formating Problem Exists
and they show on my end but not on your end this is TRUE and CORRECT To The BOOK other than the Lines from Coil to Spark Plug ENDS at CYLINDERS. Please dont Forget to RATE Me
Thank You And Happy Motoring!!
Posted on Mar 27, 2009
This is alittle tricky getting to some of the bolts but its not too hard to do otherwise. 2 bolts hold on the starter IIRC they are 13mm bolts. make sure your battery is dissconected by the black cable. then there will be 2 nuts holding on the starter wires. one will be 8mm and the other 13mm. remove them with care cause the wires may and can break. when you remove starter check wires for corrosion or if they look fraigle. repair them if damaged.
then to put it back in is the same way you took it out. should take about 1.5 hrs total if you have never done it before.
Overall i would say skill level 3/10 only cause its trickey getting to that top bolt sometimes.
Posted on Apr 29, 2009
The fuse box is located under the hood. There is component map printed on the inside of the cover. This tells you on your model where the fuse or relay is located
Posted on Jan 19, 2010
Tips for a great answer:
May 02, 2016 | 2000 Dodge Caravan
Jun 04, 2015 | Dodge Cars & Trucks
Jul 14, 2013 | 2002 Dodge Caravan
Dec 01, 2010 | 1997 Dodge Caravan
Nov 28, 2010 | 2002 Dodge Caravan
Jul 06, 2010 | 2002 Dodge Caravan
Jul 17, 2009 | 2002 Dodge Grand Caravan
102 people viewed this question
Usually answered in minutes!