Question about 2001 Pontiac Montana

1 Answer

Power door don t open automatic - 2001 Pontiac Montana

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 129 Answers

These are common for the vans. Inside your door there is an actuator that has burnt out. It is the same one that unlocks ya door and makes it open. It is locacted in the frount of the door next to the latch. It controls the door motor to make it open. Also check and see if you have bad wires going to the motor. I have seen them get coroded and not work right. Before you put it back together use some vasoline on the connection so it wont happen again.

Posted on Dec 10, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unlock Child lock on nissan if the lock is on and dont open from outside


All doors lock automatically when the vehicle speed reaches 15 MPH (24 km/h).
? All doors unlock automatically when the ignition is placed in the OFF position.
The automatic unlock function can be deactivated or activated. To deactivate or activate the automatic door unlock system, perform the following procedure: 1. Close all doors.
2. Place the ignition switch in the ON position.
Within 20 seconds of performing Step 2, push and hold the power door lock switch to the position (UNLOCK) for more
than 5 seconds.
4. When activated, the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once.
5. The ignition switch must be placed in the OFF and ON position again between each setting change.
When the automatic door unlock system is deactivated, the doors do not unlock when the ignition switch is placed in the OFF position. To unlock the door manually, use the inside lock knob or the power door lock switch (driver's or front passenger's side).
NOTE:
The automatic door unlock function can be changed using the Vehicle Settings in the vehicle information

Sep 30, 2016 | Nissan Pathfinder Cars & Trucks

1 Answer

My 06 sentra driver door won't open from outside or inside so i can't take door panel out unless i open the door please help


Idea - open up the passenger side door and see how the locking mechanism works. Then with a coat hanger devise a tool to open the door.

Then using same tool apply same technique to driver side door to open and repair.

Sep 08, 2015 | 2006 Nissan Sentra

2 Answers

Had the battery changed in 2007 nissan murano and now the chimes don't ring and the drivers doesn't automatically move back when opening the drivers door. How do I reset these?:


Disconnecting the battery erases stored memory,after you connect the battery put the key in the ignition cylinder and turn the driver door switch on(open) and off (closed), on (open),the entry,exist function then becomes complete, and the return operation can be operated,

Dec 30, 2012 | 2003 Nissan Murano

1 Answer

2005 Saturn Relay power doors don't work rear hatch locked shut...help


its alot going on if all that started happening at one time check the bcm. body control module.

Dec 02, 2012 | 2005 Saturn Relay

1 Answer

Why dont the power lock switch on the door in my 2006 Vue do not work?


Look in the underhood fuse box,the fuse box cover should list power window if it is not burnt open more than likely you will need a power window switch8_10_2012_3_48_14_am.gif

Aug 09, 2012 | 2006 Saturn Vue

1 Answer

2006 dodge Grand Caravan power door wont open automatically, makes clicking sound.


These automatic side doors are extremely complicated and require a trained technician to repair wit the factory repair guides to go by, there are many adjustments to be made and sometimes that is all they need plus some cleaning and lubrication of the latch and moving parts. My best advice is let the dealer fix this.

Jun 22, 2012 | 2006 Dodge Grand Caravan

1 Answer

2003 chevy tahoe heat and air fan runs with key off


does it still stay on after you open the driver door?, the tahoe keeps power going for a while or until you open the door, you can listen to the radio without the key on if it was on at the time you turned the vehicle off, i don't know how long you owned the vehicle you probably already know about the door killing power with key off. you'd be surprised at how many people don't know that have them/

Sep 26, 2011 | 2003 Chevrolet Tahoe

1 Answer

I have 98 Camry Le and the door locks lock automatically shortly after the doors are unlocked and the alarm will set also. What could be the problem? Alarm Control Box?


if you use the keyless entry to unlock the vehicle & don't open a door within 30 secs.the vehicle will automatically lock & the alarm will reset,if you unlock it with the key this shouldn't happen.....cheers.

Sep 01, 2011 | 1998 Toyota Camry

1 Answer

One of my sliding passenger doors will not lock or unlock automatically. any suggestions? It is a 2005 Chrysler t&c


Possible bad solenoid lock driver or broken wiring to the solenoid. The door panel will have to be removed (you don't have to remove the door from the car) to access the solenoid--these panels are held in place with a series of plastic plugs that must be popped out of the door metal with a two-pronged fork-like tool made for the purpose. Removal of the nearby seat helps getting into the door. Some plugs invariably break when removed and are extremely expensive from a dealer. Check with local auto supply businesses for much cheaper replacements. If water or dust has gotten into the solenoid core, it may be repaired by cleaning the movable core and outer coil pocket--DON"T oil anything. Operate the solenoid while removed from the latch to see if it is getting power. If you can move the core by hand, then check for power at the solenoid when operated. If power, but no action, the coil is probably open. Hope this helps!

May 21, 2010 | 2005 Chrysler Town & Country

1 Answer

If the head light doors don"t open the lights don"t come on how do I get the doors open


the lights should come on whether or not the doors are open,they are powered by the headlight switch at the same time the switch powers the lights

Dec 02, 2009 | 1991 Chrysler New Yorker

Not finding what you are looking for?
2001 Pontiac Montana Logo

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...