Question about 2002 Hyundai Accent

1 Answer

Where to order door handle and how to put them on

Door handle is broken off the front passage two in the back and door cant open

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same on my 2003 accent on all three doors but I finally decide to do somenthing on my driver side since is a dragg having to open it from the passanger side. So this is what I did I took the pannel screws off and since I could'nt take off the window opener handle I just spin the door cover around enough to get to the two screws holding the outside handle once I was able to pull out I disconnecte the wire clip so can remove and work on it outside..
Once I had it outside I saw that the plastic part that broke in half was busted I put some JB weld to put together of course that didnot work on the first try busted again lucky for me I was an expert taking the whole thing out again this time in five minutes. the second time I drill a small hole on both of the broken parts and run a wire between both and just make sure when your try in it that the wire doesnot touch in between and does no get stuck. I Put everthing back together and it work so great that I can really pull on the handle and you can just feel the tension. Thats how all my handles broke by pull in on them real hard especially when there lock.....hope this help... I might fix the other two once I findout how to remove the window handle since it would be easier...
Hugo....

Posted on Jan 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front passager door won't open how do i repair it on a 2006 saturn vue


Take it to a body shop and have them to open it.
without special tools and skills you'll have to remove the door panel to fix it. however removing the door panel requires that you open the door. a shop can likely do this without damaging the door panel. Once the door is opened, then you can remove the panel and repair the problem. likely a broken or disconnect acutator level for the door handles.

May 26, 2014 | 2006 Saturn Vue

1 Answer

I cant open my door from the inside of my 01 isuzu rodeo. Opens fine from outside but not the inside.


You need to remove the door trim to expose the inside mechanism that opens the door from the inside, look for a broken cable or a missing link to the inside handle, your problem will be there.

Mar 19, 2013 | 2001 Isuzu Rodeo

1 Answer

Back door won,t open on my 02 avalanche


door handle broke depends on what door handle it is.if door cant be open on out side out side door handle broke.if cant open door on inside inside door handle broke.door handle clip that connects to latch rod broken.when you try open door handle not engage to latch rod.door not going open.have to replace door handle with new clip holds latch rod in place.

Jan 09, 2013 | 2002 Chevrolet Avalanche

1 Answer

How to open the door frame of a 94 Saturn SL1, my window is off track and am trying to fix it but cant seem to get the door apart all the way


Start by removing the front door rear view mirror interior cosmetic piece.
Remove the 3 large nuts holding the mirror on and take it off the car.
Lift the door handle up and push the two small handle retaining pins out, take off the door handle. Unscrew all the bolts holding the door panel onto the frame, special driver needed. Lift the door panel up and away from the door. Reinstall in reverse order. If you are doing a back door, omit the mirror part.

Jul 20, 2010 | 1994 Saturn Sl

2 Answers

2006 Ford Fusion. Left front door inside handle


This link is from the handle to the latch. The door panel has to be removed in order for this problem to be fixed. The linkage is inside the door panel, it is a small diamater metal rod called a link. If you do the job yourself be careful not to break the door panel. In a shop, the labor is 1 hour for the job & if any, parts will be a seperate charge.

May 08, 2010 | 2006 Ford Fusion

3 Answers

Cannot open driver front door from outside


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal (if it has one) and then you can access the outer door handle. It sounds like the linkage connecting the handle to the latch may have broken/separated

Oct 04, 2009 | 1990 Jaguar XJ6

1 Answer

How can i remove the door panel from right front door of a 2002 Chrysler 300M . door latch will not open door from inside the car.


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.
It sounds like the rod connecting the latch to the interior handle has disconnected or broken

Sep 14, 2009 | 2002 Chrysler 300M

1 Answer

Left door


don't know about your trunk...
but for the passenger door, it sounds like the linkage connecting to the outer handle is broken...on the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.

Sep 12, 2009 | 2002 Jaguar X-Type

3 Answers

1997 buick park ave 4 door right front door handle won,t work from the outside


Order the exterior door handle AND the clip that attaches the rod to the exterior handle from your local dealership ( any part in the salvage yard will have at least as much wear as the one U are replacing ) Also order a can of touch up paint matching your car. After you have the parts and have painted the new exterior handle, roll down the window and remove the interior door panel. ( instructions have been posted at 'replace door lock buttom' ) Two nuts, one on each side, hold the broken handle in place and must be removed ( DON'T loose them ). Loosen the rod from the clip at the top to allow a bit more room, But take note on the way it is attached ( you will need to reattach the rod to new handle ) To install new mechanism put the new clip on the rod, carefully place the gasket and the new handle in place and install nuts to secure. Test the door handle and make sure it works. Reinstall interior door panel.

Jul 06, 2009 | 1997 Buick Park Avenue

1 Answer

1998 toyota 4 runner back hatch handle broken


get inside the back take door panel off mipulate door latch to open

Jan 14, 2009 | 1998 Toyota 4Runner

Not finding what you are looking for?
2002 Hyundai Accent Logo

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...