Question about 2001 Chevrolet Cavalier
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
First, if your car still runs, pull the fuel pump relay, and start your car, letting it run until it dies. This will depressurize the fuel system. Then you must support the fuel tank, and take loose the straps that hold it up. Slowly lower the tank until you can unhook the tank filler hose and overflow hose by taking the clamps off and sliding the hoses off. lower it some more, and unhook the fuel lines; they require you to insert a special tool around the edge of the connection, however this can be improvised with screwdrivers or a piece of plastic or metal bent into a C shape. Next unhook the wire connection. Once you get it down, it's easiest to empty as much fuel as you can; as this will help you get it back into place. The fuel pump is inside the tank, which locks into place with a 1/8th turn. You will need a hammer and a brass punch for this job, as it needs to be tapped around to unlock. It will then lift out. Compare the two pump assemblies. The inside parts can be slightly different, but ensure that the fuel lines are IDENTICAL and the wire connection is IDENTICAL. The new one will come with a new silicone seal. Ensure that you don't put the new one in in such a way as the float doesn't bind, otherwise you'll be doing this procedure again if you don't like guessing how much gas you have. This can be a challenge to wrestle with putting the new one in, as you have to push it down to compress the new seal, and turn it to lock it. Once you get it started, you can let up and use the hammer and punch again to tighten it the rest of the way. Next, put it back together just as you took it apart, and don't forget to hook up the wires, hoses, and fuel lines. No tools required for the fuel lines, they just snap together. Once everything's tight and hooked up, put gas back in it, and if you haven't already, put the fuel pump relay back in. This you can do as soon as the car dies, and is completely optional if the car won't run at all. You are now ready to start it up, but turn the ignition on to the run position, wait a few seconds for the pump to pressurize, and then start it. Have fun, and feel free to ask any questions should you have any.
Posted on Feb 22, 2010
Yes! Never run a car low in fuel! Now you will need to replace the fuel pump as well as the filter. But you can 'bump-start' the car by pouring a bit of gas down the intake. Do Not make this a cure!!
Posted on Mar 28, 2010
Tips for a great answer:
Sep 16, 2015 | Cars & Trucks
Jul 04, 2014 | 1996 Chevrolet Cavalier
Mar 24, 2011 | 2001 Chevrolet Cavalier
Jan 23, 2011 | 2001 Chevrolet Cavalier
Dec 13, 2010 | 2001 Chevrolet Cavalier
Mar 30, 2010 | 2003 Chevrolet Cavalier
Mar 08, 2009 | 1999 Chevrolet Cavalier
Jan 16, 2009 | 1996 Chevrolet Cavalier
229 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: