Question about 2008 Jeep Wrangler

2 Answers

Removing the Serpentine Belt - 2008 Jeep Wrangler

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 318 Answers

Tensioner is either on alternator or power steering pump. release tension and remove belt. draw a diagram if you do not have a manual or indicator chart under bonnett

Posted on Dec 10, 2012

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 14,036 Answers

Tensioner pulley you need a open end wrench,the tensioner pulley located near alternator and tensioner pulley next to power steering pump.

Posted on Dec 10, 2012

  • Jonah Oneal Dec 10, 2012

    sorry told you wrong. you need close box end wrench.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

We just replaced the water pump and the tensioner and the Serpenten belt keeps coming off as soon as you start the car


You have it threaded wrong.

Google make model year serpentine belt and then click on images tab.

Oct 31, 2015 | 1990 Pontiac Grand Prix

1 Answer

2004 dodge ram serpentine belt replacement


Try the following link. Only one tool is required. If the old one is not broken, pay attention as to how is routed before removing.
04 Dodge Ram 1500 Serpentine Belt Replacement 2004 Dodge Ram 1500...

Mar 12, 2015 | 2004 Dodge Ram

2 Answers

How do you replace the serpentine belt?


Google your make, model and replace serpentine belt. The results will many time include videos about this subject.

Mar 08, 2015 | Cars & Trucks

3 Answers

Serpentine belt on a 3800 supercharger


there should be a decal under the hood somewhere that shows the belt routing. if its gone you can probably go to the library and find a book of your car that will show the routing and you can either draw a picture or take a photo of it.

Aug 19, 2014 | 1995 Buick Riviera

1 Answer

How simple is it to change a alternator belt on subaru svx?


  1. Removing the Serpentine Belt
    • 1 Park your Subaru on a level surface and open the hood.
    • 2 Disconnect the ground (black) battery cable using a wrench. This will prevent the cooling fan from activating.
    • 3 Locate the serpentine belt routing diagram in your engine compartment and compare it to the actual routing of the installed belt. Make sure the routing on the label matches the actual routing. If they do not match or there is no label, note the actual routing on a piece of paper for later reference.
    • 4 Locate the belt tensioner pulley on your Subaru model. If the tensioner is equipped with a squared hole, use a large breaker bar with a 1/2-inch (13 mm) drive. Otherwise, use a ratchet and socket of the proper size on the tensioner pulley center bolt.
    • 5 Rotate the tensioner pulley away from the belt to release the belt tension.
    • 6 Pull the belt off of one of the pulleys and slowly release the tensioner pulley back into position. Do not let the tensioner pulley snap back or you may damage an internal component.
    • 7 Finish removing the serpentine belt from the rest of the pulleys and the engine compartment.
    Installing the New Serpentine Belt
    • 1 Match the old belt to the new one and make sure they are of the same length and configuration. It is normal for the new belt to be slightly shorter since the old one has been stretched through use.
    • 2 Route the new serpentine belt through all of the pulleys except the tensioner pulley. Use the diagram on the engine compartment or your notes, as a reference, to properly route the belt.
    • 3 Insert the large breaker bar into the square hole or the ratchet and socket into the tensioner pulley center bolt.
    • 4 Rotate the tensioner pulley in the same direction you did to release the belt tension.
    • 5 Slide the serpentine belt onto the tensioner pulley.
    • 6 Release the tensioner pulley back into position.
    • 7 Look at all the pulleys and make sure the serpentine belt is properly seated on each one. Otherwise, release the belt tension and adjust the belt.
    • 8 Connect the ground (black) battery cable using the wrench.

Oct 18, 2011 | 1992 Subaru SVX

1 Answer

How is the best way to replace a serpentine belt on a 2005 kia sorento


First remove the engine plastic cover by removing the bolts that hold in. Then loosen the nuts at the front of the AC Belt and Power Steering Belt. Now use a Socket set and loosen these two belts by turning the tension adjustment bolt, Anti-Clockwise.

You have to remove the first two belts (AC & Power Steering) before reaching the Serpentine Belt.

Now loosen the nut on the front of the lowest pulley before loosening the serpentine belt.

To loosen the serpentine belt, you could either remove the metal skid plate at the bottom of the engine by turning the tension adjustment bolt, Anti-Clockwise or reach down from the top and loosen it with the socket set ( quick & easiest)

Sep 13, 2011 | 2005 Kia Sorento

2 Answers

Removing water pump v6 engine


drain the coolant first. remove the serpentine belt. heres a pic of the hardware to it. hope this helpsonetufshoppe_46.gif

Jan 25, 2011 | 1997 Buick LeSabre

2 Answers

Change serpentine belt on 06 sienna


  1. 1 Check to ensure the Sienna's engine is cold, then make sure the Sienna is in park, the ignition is in the off position and the key is removed from the ignition to prevent any possibility of the engine engaging during the serpentine belt replacement.
  2. 2 Open the hood and locate the serpentine belt routing diagram sticker on the side of the engine casing. Study it for a moment before removing the existing belt. It is essential the new belt be installed exactly as the diagram indicates.
  3. 3 Find the tensioner pulley, the main pulley that controls the serpentine belt, and fit a 1/2-inch socket wrench over the self-tensioner on the outside of the pulley.
  4. 4 Pull the wrench to the left to move the pulley forward, which loosens the belt, then remove the belt.
  5. 5 Compare the old serpentine belt with the new, replacement belt for length, width and number of grooves on the belt's underside. Be certain the replacement belt is the right part.
  6. 6 Fit the new belt on to each pulley according to the serpentine belt routing diagram on the manufacturer's sticker, or according to the drawing made prior to removing the old belt. Fit the new belt on to the tensioner pulley last, again applying pressure on the pulley's self-tensioner with the half-inch socket wrench to loosen the pulley.
  7. 7 Release the pressure on the self tensioner and allow the tensioner pulley to ease back into place, thereby tightening the new serpentine belt with the appropriate tension.
  8. 8 Remove the wrench and close the hood.
Thank you and good luck,
Lee

Aug 26, 2010 | 2006 Toyota Sienna

1 Answer

Changing serpentine belt on 2000 chevy silverado 1500 4.8 v8


The belt has tension applied to it from an idler pulley arm. you need to release tension by using a socket and ratchet on the nut on the idler pulley. Release tesion and slide belt off . Make sure you have the diagram for serpentine belt. it is usualy under the hood. If not make a diagram yorself before removing belt.

Aug 13, 2010 | 2000 Chevrolet Silverado 1500

1 Answer

How to replace a serpentine belt on a ford taurus 2002


just replaced serpentine belt on my 2000 taurus with the push rod engine, first remove the plastic radiator recovery bottle.
next using a 15mm closed end wrench, remove the tension from the aerpentine belt. paying special attention on the routing of the belt prior to removing. Remove the old belt. Reverse this procedure to replace the belt.

Aug 11, 2008 | 2000 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...