Question about 1997 Chevrolet S-10 Pickup

Open Question

Can't remove the ignition key from 1997 chevy s10 pickup

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: I have a 97 Chevy S10 pickup...cannot move shifter out of park

When my battery was dead i was forcing the key in the ignition which messed everything up with my chevy s10 and have to get everything replaced....: (

Posted on Jan 20, 2009

Ad
  • 1 Answer

SOURCE: Chevy S10 Pickup Starter. Removed the two bolts

Just changed a starter in a 94 S10 4x4. The only way to remove the starter was to take the passenger side exhaust manifold off and bring the starter out that way. Installation the same in reverse. Hope this helps. Don

Posted on Jun 25, 2009

  • 740 Answers

SOURCE: 1997 Chevy S10 pickup Fan switch for heater runs on high only.

replace the blower motor resistor located on the heater box were the blower motor is located the wiring to the blower may go to it. This is very easy to locate if you buy the part first.

Posted on Jan 06, 2010

  • 10 Answers

SOURCE: how do I remove drivers side door panel on 1998

i think there are screws around the door handle on the in side that need to be taken off the the rest just pop out

Posted on Feb 01, 2010

  • 1757 Answers

SOURCE: firing order for a 1999 chevy s10 pickup

I apologize for the late response...Due to the bad economic situation this site has had a substantial (+50%) increase in the number of questions being asked in the last four months.
I assume you have a 4.3L and not the 2.2L?

For the 4.3L:
Firing Order:
1-6-5-4-3-2

Cylinders:
6-----------5
4-----------3
2-----------1
(front of vehicle)

Distributor:
coil wire-->
-----6------->............<--------5-------
-----4------->............<--------1-------
-----2------->............<--------3-------
............(front of vehicle)

Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!

Posted on Feb 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How & where can i get an original key for my chevy 1999 S10 pick up truck. i use a duplicate key since i didn't get the original key when i bought my truck, Is there anyway i can acquire an...


As long as the ignition key cylinder has never been changed, dealers will have records of factory key cuts going back some years. I think the cut off is 10 years but I could be wrong.

Jun 25, 2011 | 1999 Chevrolet S-10 Pickup

1 Answer

1997 chevy s10 blazerdash wont light up when key


the dash sound's like a fuse, check the fuse box under the hood and in the door jamb on the side of the dash, also check your fuel filter and fuel pump, im betting on the pump because i have a 2001 chevy blazer that has had two replaced and it has 233000km on it!

Jun 04, 2010 | 1997 Chevrolet Blazer

1 Answer

1997 Chevy S10 pickup Fan switch for heater runs on high only.


replace the blower motor resistor located on the heater box were the blower motor is located the wiring to the blower may go to it. This is very easy to locate if you buy the part first.

Jan 06, 2010 | 1997 Chevrolet S-10 Pickup

1 Answer

I cannot remove ignition key from lock on Blazer S10 1999. If I wait 1 to 60 minutes I can remove the key.


sounds like the igniton key swich has a problem possibly a electrical short to the key or some component is heating up the key causing not to be removed quicky

Jul 09, 2009 | 1997 Chevrolet S-10 Pickup

1 Answer

Key won't turn


look at the bottom side of your steering column, the plastic covering... There's a little round plastic piece that is removeable, it's pretty much right under the ignition key switch. Remove it. If you can see up in there, there's a small round metal piece, that's the release for the key to turn. Try pressing is gently with an ink pen and turning the key at the same time.

Apr 14, 2009 | 1997 Chevrolet S-10 Pickup

1 Answer

Cannot remove key from ignition or move shifter out of park


i've had this problem before. it is more then likely the ignition switch. if the key gets stuck like you say

Dec 28, 2008 | 1997 Chevrolet S-10 Pickup

3 Answers

I have a 97 Chevy S10 pickup...cannot move shifter out of park


When my battery was dead i was forcing the key in the ignition which messed everything up with my chevy s10 and have to get everything replaced....: (

Dec 28, 2008 | 1997 Chevrolet S-10 Pickup

2 Answers

No tail lights


Try checking the headlight switch it may have broken contacts in it. Easy fix go to a salvage yard find same make and model truck, swap headlight switches.

Dec 27, 2008 | 1997 Chevrolet S-10 Pickup

1 Answer

Rplacing the ignition switch


there is a safety switch that prevents the ignition from being turned off and removed while in gear. try putting in nuetral and removing the key. if it does then it is a problem with the shifter and not the ignition.

Nov 30, 2008 | 1997 Chevrolet S-10 Pickup

Not finding what you are looking for?
1997 Chevrolet S-10 Pickup Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...