Question about 2002 GMC Sierra 1500

Open Question

No low beam lights on a western snow plow - 2002 GMC Sierra 1500

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

jackiaria
  • 350 Answers

SOURCE: stalling when going from R to D while plowing snow

It sounds like your draining your battery with all the accessories. It could be a loose alternator belt or that the belt is just getting wet and slipping or your alternator is not up to the job!
Try going to a good auto parts store like Advanced Auto and ask them if this could be the problem. They may be able to swap up your alternator to one that can handle the load!
Good Luck!

Posted on Jan 19, 2009

redbeard00
  • 957 Answers

SOURCE: Can I make a 99 Chevy 1/2 ton Western Unimount

No. it is technically possible but there is a good amount of metal fabrication involved.

Posted on Apr 28, 2009

  • 67 Answers

SOURCE: with plow lights pluged in do not have low beam on

ca mention may be wrong un plug the 2 chk fuse and start overthen u no

Posted on Dec 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Plow lights work OK, but why is there no power to joystick?


Bad connection in plug,bad wire, fuse or fusible link, faulty joystick.
press the helpful button and check link below
western plow problem Snow Plow Forum Let Talk Snow Discussion Forums

Jan 14, 2016 | 2002 Ford F-150

1 Answer

While driving down road my western snow plow is rocking all over.


not good or safe! check all mounting pins and frame mounts. A lot of force is on snow plows and the frame mounts often need to be welded up. I imagine it is the whole unit and not just the plow.

Mar 12, 2015 | Cars & Trucks

1 Answer

I have a western snow plow works left, right but won't go up all the way unless I help it. What would be the problem?


Probably a bad hydraulic seal, or low fluid ? Typically seals go bad then pressure is lost to move properly. ...

Feb 22, 2015 | Cars & Trucks

1 Answer

I am installing a western pro snow plow on a 2013 Chevy 2500 hd and can not get the left low beam to work all high beams work everything but the left low beam


Plz check and follow the wiring to low beam to ensure they are making a good connection. Also, you may want to pull other low beam bulb and put in place of this one to ensure that it is not the bulb. Hope this helps.

Nov 14, 2013 | Cars & Trucks

1 Answer

Ford 2003, F250 Desel, 7.3 Liter Head lights


first thing i would check is the wiring were the plow wiring is spliced in at this is most likly the culprate. or you may have a bad multi function switch in the steering column

Jan 02, 2010 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

IS THERE A HEADLIGHT RELAY FOR HIGH/LOW BEAMS, OR IS THAT THROUGH THE MULTIFUNCTION SWITCH IN THE TURN SIGNALS ON THE STEERING COL. HAVE AN ALTERNATING PROBLEM. I HAVE HIGH BEAM ON FRNT. RIGHT,NO LOW BEAM...


Headlights in my '03 Jeep Cherokee are through a relay, both both light's are on the same relay I believe.

I would be suspect of any added modules which drive the headlights. Hopefully, they didn't "splice" in, but used one with factory connectors, so you can remove the module and reconnect the connectors as the vehicle was shipped from the factory.

When it's all said and done, you really need a wiring diagram for the vehicle. I can get one for my Jeep at the local repository library. Don't know about your truck. You may be able to find a diagram through some hard searching on the www.

Let me know if you need someone to bounce thoughts off of.

Dec 10, 2009 | 2004 Dodge Ram 2500

2 Answers

Wiring for western plow joystick


My western snow plow will not go up or left or right with joystick. I can use a screw driver and make contact on the silanoid and then move the cables with the joy stick and then it will work. I have relaced selinoid and contacts. any ideas? Stomped

Oct 25, 2009 | 1990 Chevrolet Crew Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...