Question about 1990 Ford F150

1 Answer

I have busted a fuel line on my f 150 when i tried to put the transmission in. the transmission got hung up on the fuel line how do i change that

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 1,596 Answers

  1. Best Real Fix Is to Order from ford the entire Fuel line and replace it as a Whole as fuel lines are Not to be "RIGED" They can cause Tragic fires.
  2. They are Realy Simple to replace if you are Mechanicly Inclined If NOT Spend the Extra $$ to Have A Pro Do it Right

Posted on Jan 13, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Busted transmission line at cooler fitting

get a replacement from a wrecker or have a hose fitting shop make a new one.

May 11, 2014 | 1993 Jeep Grand Cherokee

1 Answer

1995 blazer transmission change out

There are like 6 bolts around the bell housing that bolt the transmission to the engine. Two transmission lines that need to be removed from the transmission, linkage for shifter, driveshaft, started,(disconect the battery) torque converter bolts and a few other small conections. The main thing is that when you are assembling it that the converter is all the way in the transmission. If not, the transmission will not **** to the engine and you may try to tighten the bolt which will bust the ears off the bellhousing on the transmission. Just don't force anything.

Dec 27, 2011 | 1996 Chevrolet Blazer

1 Answer

My 89 f1-150 fuel pump takes 10 minutes to shut off when egnition is turned on it wont start until fuel pump shuts off

I would say the fuel pump is worn out or filter screen that is attached to fuel pump is clogged..
have you ever changed the in line fuel filter ?....I have never heard of this problem...
I wouldnt hesitate to change the fuel pump and in line fuel filter.......
One test you can try .....Get a good drain pan disconnect front line from in line fuel filter...rather than using a pressure gauge to save time turn ignition on and watch how fuel is dispensed into drain will be able to verify if it is bad....considering the age of vehicle it is surely clogged and or worn unless you have changed the pump,and filter and also cleaned the tank before...
Because all have trash in them......I think you are lucky to have that year of truck...I have a 98 F150
but I do long to have about a 72 model...WHAT engine is it ....IS it fuel injected ...?
This will help diagnosis but you may have just bought it....................I do not know

Mar 02, 2011 | 1989 Ford F 150

1 Answer

How to change an gas filter on a 2005 F-150 4x4 V-8 5.6 Liter

Under the vehicle, on the driver side, about where the door is, on the inside of the frame you will see two fuel lines. One will run into a small silver cylinder like thing about 3-5 inches long. I'm not sure of the wrench sizes, but you will need one for both of the hex fittings. You need to twist both, ensuring not to put a twist into the fuel line. There will be these fitting on both sides of the filter. Have a drain pan ready, because the fuel lines will empty fuel left over in the lines.

Please ensure to pay attention to the small arrow on the fuel filter, which indicates the direction of flow. have the arrow on it pointing towards the front of the vehicle.

After replacing, turn key to on position, and wait for the fuel pump to turn off. Then start your vehicle, and you're ready to roll!

I hope this helps! Comment or ask me for clarification if I've been unclear about anything.

Jan 11, 2011 | 2005 Ford F-150

1 Answer

My 1993 Chevy K1500 will not turn over

"Trying to start" is turning over, also called cranking.

remove the fuel line from the carb, disable the ignition, point the fuel line into a can or jar, then turn the engine over.

If no fuel come out, you have a fuel delivery problem.

If fuel comes out, re-attach, look down the throat of the carburetor, operate the throttle, and see if any fuel squirts out.

If not, the float might be hung up.

If fuel squirts, fuel cannot get into the air stream from the float chamber. Time for a carb rebuild.

Jul 01, 2010 | 1993 Chevrolet K1500

1 Answer

Were is the fuel filter

For 1991 Dodge Truck D150 1/2 ton P/U 2WD 5.2L FI 8cyl the Fuel Filter is located: Under vehicle, driver side, below seating area, driver side of transmission, mounted on frame rail in fuel line.

Hope helps.

Jun 30, 2010 | 1991 Dodge Ram 150

1 Answer

Tries to go in 4-wheel by itself

check the solenoid at the pass side firewall for the hubs it gets water in it and goes bad if it is white and black with no cover over it it is the old style there is a new revised one also check the lines going to the hubs

May 16, 2009 | 2005 Ford F-150

1 Answer

Flooding wont start 88 150 302

I had exactly the same problem when I bought a ford pu last year for resale. 4 injector wiring lines were chewed through. I tried starting it before I fixed them, and it ran on the other 4... but it did foul the plugs that had chewed lines, so I changed them & that solved the problem. So if you have the right fuel pressure at the fuel rail, and your injector wiring has been done correctly, i would not buy new injectors until i put new plugs in those cylinders.

Apr 14, 2009 | 1988 Ford F 150

1 Answer

1989 ford e 150 fuel poblem

check the module located on the side of the distributor. I have had that problem and that was the ticket. Fords are common for that sort of failure.

Apr 06, 2009 | 2007 Ford E-150 XLT Wagon

1 Answer

My 1988 F-150 wont start but will turn over.

Look in this direction. You have solved the possible issues with the starting, now move on to checking your fuel and transmission. I suggest you look at the wires coming off the transmission first, then check to see if the TBI or carb are dry i.e. no fuel. The sound you could be hearing is your fuel pump or a normal sound coming from the starter switch. If you can give me more detail. I may be able to help more.

Dec 21, 2008 | 1988 Ford F 150

Not finding what you are looking for?
1990 Ford F150 Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

71231 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides