Question about 1991 Toyota Pickup

1 Answer

How do you hook up the ignition to the new sterring column 91 toyota pickup

Replaced steering column newone dont have ignition how do you hook up old ignition to new column

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 318 Answers

Looking at terminal block on the vehicle with the connect tang to top wires are numbered from right to left 1 to 4 then bottom right to ldft 5 to 8Terminals 3 & are accessory on . 2,3&4 are ignition on and turn on 7&8. When you turn to start terminals 1,2,4,7,8connect. Terminal 4 is battery power thru fuseable link. Terminal 2 goes to Ignition gauge fuse and turn fuse. Terminal 1 goes to daytime rinning light relay. Terminal 3 goes to acc fuse or radio. Terminal 8 goes to another fuseable link to batt. terminal goes to starter motor. Hope that helps

Posted on Dec 10, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Ignition switch replacement 1992 Toyota Pickup How to

i had to remove the steering column and use a vice-grip to remove those bolts. i replaced them with allen bolts.

Posted on Sep 08, 2008

  • 112 Answers

SOURCE: Removing rotor on a 1991 toyota 4x4 pickup

You have to take apart the 4x4 hub to get to the lock nut for the bearings then you have to reome the hub and rotor assy,then you have to press the wheel studs out to remove the rotor,then reverse the process.

Posted on Mar 29, 2009

udesh99
  • 97 Answers

SOURCE: 91 toyota pickup with clutch problems

First you have to bleed air from clutch fluid.
if it is not ok, Remove clutch agan & check pressure plate finger blance or damage.

Posted on Nov 18, 2009

Testimonial: "thanks"

  • 1 Answer

SOURCE: Correct vaccum line hook ups for 91 toyota pickup 6 cyc

correct vaccum line hook ups for 84 toyota corolla

Posted on Nov 29, 2009

  • 25 Answers

SOURCE: my toyota 92 pickup truck turn signals don't work;

Try changing out your turn signal flasher.it might be under your dash by your fuse box.Some trucks have two one for turn signals one for 4 way flashers.By all means check the fuse first.

Posted on Mar 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 2003 ford explorer &;lost key an broke ignition'now can a used sterring column start my truck?do i need to replace computer too?


you can replace the ignition switch with out replacing the computer! the switch will be cheaper than a used steering column!

Feb 24, 2015 | 2003 Ford Explorer

1 Answer

Need to replace steering column in 1996 buick century wagon


you can use 1995 to 1996 buick century and olds ciera . But the ignition key has a chip in it you will need to take the Theft/Locking, (keyless entry, pkg deck)

Dec 13, 2012 | 1996 Buick Century

1 Answer

How hard is it to replace the turn signal switch in the steering column ? I have a new replacement, the old one shorts out and you can actually hear it arcing.


Hi,
Very easy actually, just remove the screws under your steering wheel column cover. the screws are under the cover. After removing all the screws, just a hard tap on the cover will dislocate the whole cover.
Now you will see the signal light assembly and look at the bolts holding switch, remove the bolts. Follow the harness of the switch, just at the mid bottom of the steering column shaft, disconnect the connection, and put the new switch into it.
hope that was easy!
Thanks for using Fixya!

Dec 10, 2010 | 1990 Toyota Pickup

1 Answer

Replace ignition switch and kew switch


***As per Haynes Manual for your Vehicle*** Warning: if your vehicle is equipped with a suplemental inflatable restraint (SIR) system, always disengage airbags before working in the vicinity of the sterring wheel to avoid accidental deployment of airbags.
1. disconnect the negative cable at the battery
2. Remove the steering wheel if it interferes with the access to the steering column covers on your vehicle. Remove the steering column covers.
3. Unplug the wires from the ignition switch, remove bolts and lift the switch off the steering column.
4. Installation os the reverse of removal.

Hope this Helps! I have a an illustration and it looks that the switch is on the left side of the steering column. If you need any information or help removing the Steering wheel or steering column covers let me know! Good Luck.

Feb 10, 2010 | 2000 Saturn SL

1 Answer

I am trying to change the ignition switch in my 91 chevrolet truck and i cant get the old switch out.


f
The ignition switch is usually mounted to the steering column and is operated by a linkage rod.
NOTE On column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible. On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.

78b188a.gif

The ignition switch is operated by the key switch. Courtesy of Ford Motor Company. To replace the switch:
  • Remove the ignition switch wiring harness.
  • Unbolt it from its position.
  • Bolt the new switch into position.
  • Attach the witing harness.

Good luck (remember rated this help)

Jan 05, 2010 | 1991 Chevrolet C1500

1 Answer

Need to change ignition lock cylinders


Fig. 7 Steering column & ignition switch assembly. Exc. 1984 Corolla 41767877

  1. Disconnect battery ground cable.
  2. Remove steering wheel, if necessary, steering column garnish, if equipped, upper and lower covers, Fig. 7. On Starlet models, remove upper cover.
  3. Disconnect electrical connectors from ignition switch.
  4. Turn ignition key to ACC position and remove ignition key cylinder.
  5. Remove screw and ignition switch.
  6. Reverse procedure to install.

Mar 23, 2009 | 1986 Toyota Pickup 4WD

1 Answer

Lost keys to 1986 toyota pick-up. can't find locksmith with equipment that will work. Mechanic says too difficult to take off lock cylinder. hotwire, but stearing column will still be locked. Any other...


Cheapest way would be to really look for a locksmith that can either reproduce your original keys manually(handmade) or through machine that can regenerate your original keys otherwise you'll have to replace new sets of door keys locking mechanism and new set of ignition switch that may be adopted to your steering columns locking devices.

Nov 24, 2008 | 1986 Toyota Pickup 4WD

1 Answer

Ignition switch replacement 1992 Toyota Pickup How to


i had to remove the steering column and use a vice-grip to remove those bolts. i replaced them with allen bolts.

Aug 10, 2008 | 1992 Toyota Pickup

2 Answers

Knocking feeling against or in sterring column-2008 impala


have it checked be a steering specialists. safety first when it comes to steering

May 23, 2008 | 2008 Chevrolet Impala

Not finding what you are looking for?
1991 Toyota Pickup Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...