Question about 2000 Honda Passport
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Normally attached at opposite end of throttle linkage. Remove your air cleaner intake hose at throttle body, and observe throttle plate that opens & closes as you press accelerator, it will be at the end of that, on outside of housing.
Posted on Jan 10, 2009
There is a metal fitting bolt close to the bottom of the transmission. You can unscrew that out and if transmission fluid comes out it's good. If this doesn't occur you'll have to get a pump and pump transmission fluid in it. This is the easiest with a lift of course. Don't you hate stupid Japanese ideas. Good luck man
Posted on Jan 14, 2009
If you have an automatic transmission, you should take it to a mechanic or at least purchase the special fluid temperature gauge needed to do it right. You add fluid through the overfill screw opening found on the transmission fluid pan (there is no dipstick or underhood component on the 96' and later models). It should be located in one corner of the pan; there's also a drain plug is more toward the middle. Never open the overfill screw with the engine stopped - it should always be running and warm.
For a manual transmission, the fill plug is also on the pan, but it is located on the side.
Posted on Jan 19, 2009
SOURCE: 2000 Honda Passport wont start.
I ended up finding a repair shop here in Cleveland. The problem ended up being a short in the electrical system. My fuse kept blowing. That's why it wouldn't restart. If you decide to take your vehicle to a repair shop, have them check out the electrical system. My problem was found under the drivers side fender. Some of the wires were corroded. Good luck!
Posted on Feb 18, 2009
This is a picture i drew in paint , for the 2001 honda passport belt wrap with a 3.2Liter V6, hope you can use it for the 2000 model.
Posted on Sep 01, 2010
Tips for a great answer:
Dec 30, 2015 | 1999 Honda Passport
Jun 19, 2013 | 2000 Honda Passport
Nov 23, 2011 | 2000 Honda Passport
Sep 01, 2010 | 2000 Honda Passport
Feb 24, 2010 | 2000 Honda Passport
Feb 08, 2010 | 2000 Honda Passport
Jun 28, 2009 | 2000 Honda Passport
Jan 18, 2009 | 1998 Honda Passport
40 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: