Question about Land Rover Freelander
Or even a crank angle sensor. if so where is this located as i am unable to find a manual anywhere. the car cranks but wont start (no spark) also any tips on what else to check thanks
Cam senso and crank sensor are at front of engine behind the grillto the right of centre looking at front of vehicle. this model has an inertia switch whichcuts fuel supply if you have had a decent bump recently.It is located on pass side strut tower. have you checked the immobiliser system? it has a deadlock or super immobiliser system. manual should tell you about this. wont hurt to check all fuses under bonnet and in passanger compartment.If all above are OK then you can check voltage at coilpak. orange wire is the voltage supply and the black with white trace is the pulse. good luck
Posted on Dec 10, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1999 land rover won't start
Check the fuses in the Fuse panel, and if you have an alarm in it disconnect the power wire to the alarm. If the fuses are good and there is no alarm or the alarm is disconnected you need to check your coil and the wiring to the coil itself.
Posted on Jul 16, 2011
The engine and automatic transmission in this vehicles drive train are fully electronically controlled by a computer called the PCM (Power Train Control Module). Whenever a problem like this occurs the computer stores a record of the problem (there are of course some exceptions to this, like the fuel pump, engine coolant temperature sensor and MAF sensor for instance) in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL A TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPENDING YOUR HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM
Posted on Jul 26, 2012
Tips for a great answer:
Jan 15, 2015 | 2003 Land Rover Freelander
Apr 03, 2014 | 2004 Land Rover FreeLander
Aug 22, 2012 | Land Rover Freelander Cars & Trucks
Nov 03, 2010 | 2002 Land Rover Freelander
Sep 29, 2010 | 2002 Land Rover Freelander
Sep 12, 2010 | 2002 Land Rover Freelander
Jul 28, 2010 | 2002 Land Rover Freelander
May 29, 2010 | 2003 Land Rover Freelander
Oct 10, 2009 | 2002 Land Rover Freelander
Jan 20, 2009 | 2003 Land Rover Freelander
Nov 07, 2017 | Land Rover Cars & Trucks
329 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: