I have a can obd2 diagnostic tool (innova-1003) is the product and realized that only works on 1996 vehicles/can you use it on older vehicles or a web site to down load

6ya staff

• 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

6ya - Get Instant Help

6ya.com

Need repair answers fast Use 6ya to...

Posted on Jan 02, 2017

SOURCE: hand held diagnostic tool

OK...
If the scann tool is powered with the power of the Vehicle.
It's mean the connector is missing a power .
To fix this you need to check. the following
Check the " CIG" fuse 15amp. This fuse give +12 v to the cigarret lighter and OBDII diagnostic connector.
Is the Orange Wire of the OBDII connector and PIN # 16
The Ground is the PIN # 4, black wire, and PIN # 5, black/white.
Be sure of this wires are correct fix if any need,
after try to sacn again or see if there a power when you connect the Scann tool.

OK.. I hope this help to try diagnostic your vehicle,
Thank you for use fixya.

any further info, let me know.

Posted on Aug 13, 2008

SOURCE: Where can I find diagnostic socket in chevrolet HHR 2008

should be under steering wheel within 19 inches left or right it may have a cover on it that says obd2

Posted on Dec 27, 2008

SOURCE: OBD2 PORT DOESNT WORK SCAN TOOL DOESN'T WORK WITH

Try another scan tool on this vehicle to confirm that it is a problem with the port. Then have a technician comfirm that the computer isn't at fault before replacing the port connector.

Posted on Jul 18, 2010

SOURCE: Initially OBD2 connector would not

I have the same problem few days ago, and still didn't find any solution. Can any one please help?????4

Posted on Jul 28, 2011

SOURCE: How to figure out if a car can do the diagnostic by obd2 diagnostic tool?

You can view the website , that may help

http://www.xcardiag.com/service/

there are 3 step you get to know if the your car can test by obd2 diagnostic tool

1. the year of vehicle , mostly after 1996

2. check out the System Information Label of your car

3. View the vehicle owner's manual or ask your dealer directly

Posted on May 21, 2012