Question about 1987 Ford Taurus

1 Answer

Cant find emergency flasher unit

Ilooked for it everywhere

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

It is the Same Flasher that Controls the Blinkers. Look on the Fuse Panel under the Dash on the Drivers Side. Should be right at the Top of the Fuse Panel. Usually a Round or Square Box.

Posted on Jan 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a diagram for how to find the flasher in a 1999 dodge stratus..it's not in the fuse boxes


Simple method without mystery:
  1. Turn blinker flashers on;
  2. Listen for clicking;
  3. Find source of clicking. It is the flasher. :)
NOTE: Emergency flashers and blinkers usually use a separate flasher unit, but one is close to the other. If your blinkers do not work but your emergency flashers do, find the emergency flasher unit by finding the source of clicking, then locate the blinker flasher nearby. They will ALWAYS be underneath the dashboard on the driver side.

May 11, 2015 | 1999 Dodge Stratus

2 Answers

How do I find emergency flasher unit on my 1988bronco 2?


most vehicle use the flasher unit as an emergency flasher light. By pressing the hazard light switch, it powers the flasher unit and connects all flashers together. If it has a light module , have it checked out or check the hazard switch itself.

Jan 18, 2015 | Cars & Trucks

1 Answer

Where is the flasher unit for 1999 mercury mountaineer?


It's the same flasher unit for both turn signals AND emergency flashers. Even though one side works, the other won't. If you have a good fuse for the turn signals, then replace the flasher unit.

Aug 04, 2014 | 1999 Mercury Mountaineer

1 Answer

Have hazards but no turn signals for 1994 ford econoline 250


Check your flasher units. Because of the load of all signals working under Emergency conditions, there are 2 flasher units.
The basic flasher may be bad and that is why the Emergency flasher still works.

Also try cycling the Emergency flashers about 20 times. Some designs share contacts between the 2 units and the prongs get misplaced which the Emergencies are used.

Oct 15, 2013 | 1994 Ford Econoline

1 Answer

1992 lexus es300 flasher relay location


It is located beside the emergency brake pedal and is the approx. 3/4" square fuse. turn on your signal light and hold on to it you will feel it click.(Addendum) The replacement may only have 3 working prongs; the 4th prong on mine had a soldered connector but wasn't connect to anything. I also had to remove the left kick panel to get to it; a simple operation.

Jan 17, 2013 | Cars & Trucks

1 Answer

How do I install the new Emergency Flasher/Cruise Control part


two seperate units.... your flasher relay is under the dash, simply unplug it and replace with new one. the cruise control is most likely controlled by the ECM. however the control unit is located under the hood adjacent to the intake manifold

Mar 14, 2012 | Cars & Trucks

1 Answer

Turn on the car then click the signal light and nothing!!! no tic to light nothing could it be the signal light switch or a fuse?? please help!!


Try the flasher unit first, checking it costs nothing. Turn on your emergency flashers and if they work, get your owners manual and find the fuse panel locations. Inside the manual or the panel cover there will be a legend as to what is what. You will have two flasher units, one for turn signals and the other emergency flashers. They are the same units so just switch them, if your turn signals now work, but your flashers don't, then you have a bad flasher unit. Go buy another at any auto parts store and put it in the correct socket, you rarely use the emergency flashers so you want your new one in the turn signal circuit.

If that does not do it then you may have a broken switch which requires pulling the steering wheel off to fix. That is not an owner service thing. One bad light bulb is not going to knock them all out.

Jan 05, 2011 | Mercury Cougar Cars & Trucks

1 Answer

Turning signals will work only when emergency flasher switch is set to the on position /also the emergency flashers do not work at all/


Check the flasher unit, switch the emergency flasher with signal flasher see if emergency will work. Possibly they run off same "double flasher", probably replace it.

Sep 17, 2009 | 1996 Ford Thunderbird LX

1 Answer

Can't find the turn signal or emergency flasher fuse for 1998


Conrad, up north.
My protege is a '99. The turn signals and hazard flashers use the same flasher unit. It is located under the dash to the left of the steering wheel and above and a bit to the right right of the driver's side fuse box.

Dec 07, 2008 | 1998 Mazda Protege

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...