Question about Cars & Trucks

Open Question

Acura key fob with new batteries not working

Both key fobs not working with new batteries?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: renault megane key fob wont work

I had the same problem with mine

your key fob is now out of sync with the ECU to sync them just follow this link (renault will charge up to £180 for new key and to sync it)

http://renaulthelp.110mb.com/ImmBypass.html

Posted on Jan 09, 2009

Ad
baccardo
  • 150 Answers

SOURCE: Programming a key fob

you will need the dealership diagnostic tool to program the remote

Posted on Apr 24, 2009

emissionwiz
  • 76164 Answers

SOURCE: key fob not working after battery change ford focus 2006

Try reprogramming it.

1. Turn the ignition from OFF to RUN 4 times within 6 seconds.
2. Turn the ignition OFF. The system will chime to confirm programming mode.
3. Within 20 seconds, press any button on first keyless remote.
The system will chime once to confirm programming.

4. Within 20 seconds, press any button on second keyless remote.
System will chime once to confirm programming.

5. Turn ignition to RUN to exit programming mode.

Posted on May 28, 2009

  • 2 Answers

SOURCE: renault key fob doesnt work

Hi.
I have a clio II, 2001, i have the same problem and i fixed it.
Don't know if will work for you but here it goes:

1 - no key in ingnition
2 - press the unlock button in console off the car for about 10 seconds(dont let go)
3 - it should work the central doors one time and then 2 times( hear)
4 - press the remote a few times until it starts working

It worked for me hope the same for you.
Please tell me if it worked and pass the message.

Good luck

Posted on Sep 15, 2009

  • 59 Answers

SOURCE: Porsche 2000 911 Carrera. Key fob problem

each vehicle is different put the key in the ign. turn key on press door lock/unlock at the same timehold button for 10 sec see if any lights on the dash inst. panel blink if they do that means that the key fob was programmed to your vehicle i recommend a new key fob this will give you definative instructions on how to reprogram your fob

Posted on May 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace the battery on the keyless entry on my 2001 Acura CL 3.2 and it's still not working is there some type of programming procedure?


Yes the key Fob is likely in need of programming. You can do it at home with the instructions at the link below. If that fails time for the dealer to look into this problem. Acura CL 2001 Keyless Entry Remote Fob Programming Instructions

Feb 16, 2017 | 2001 Acura CL 3.2 Type S

1 Answer

Car won't start sometimes, changed battery, it's like the car doesn't know it's in park to start


When the anti theft system was created,the dealers forgot to tell the new car buyers about how much the fob matters to the vehicle,without it,owners are stuck,your anti theft device is activated,you need to lock and unlock your doors a couple times with the key fob,not the key,and then you need to put the key in the ignition and start it,if you dont have your key fob,call your car dealer to get a new one,they are programmed for each car only,you cannot bypass it.if you lost your fob or never had it,whatever,you need to have the exact fob that came with that car from the factory,the key and fob have a chip in them that only go to that certain car,if you do not have it,then you need to buy a new one from the dealer or ebay and then you need to contact your dealer about programming the fob to your car,you might not have to have it towed if they have the documents from the car,the only other way is to get a junk car,with the steering column,key,fob and all computer boxes and door locks and switch them,i just did that with a 98 dodge dakota,and it works....

Jul 13, 2015 | 2004 Acura TL

1 Answer

My key fob stopped working overnight x type jaguar 2002


pop open the key fob from the side and you will notice a watch battery inside the fob, replace it and make sure nothing came unsoldered from the board and that should fix the problem

Nov 23, 2011 | Cars & Trucks

3 Answers

New Dodge Journey 2011 Where would the key enclosed in keyfob fit to start the vehicle if remote not working?


I just changed the battery in my fob for 2011 Journey Crew, with the battery removed ( from fob ) I did start my car by pushing the start button whith my fob... so the theory is tested and true.... also the battery you'll need is CR2032 available everywhere... and removing the battery will NOT remove the programming of your fob ( also tested )... so no need to visit the "steelership" Hope this helps....

Apr 03, 2011 | 2011 Dodge Journey

1 Answer

My 1998 Acura CL key fob won't work to lock or unlock the doors, but the battery is good. Not sure what to try next.


these key fobs go bad often poeple think they just need programing but thats not the case, the board inside the fob sometimes the soider breaks free and doesnt make a good connection, the most common spot is where the battery contact are, take a good look at that area and you may be able to fix it by re soidering it, hope this helps.

Oct 26, 2010 | 1998 Acura CL

1 Answer

2000 acura TL horn blows when replacing the battery


dont you have the alarm key fob? if so that will reset it. just press unlock. If you dont an dits not a OEM Acura alarm you will need to find who makes it and get a new key fob, or have a shop that does alarms to disconnect it.

Oct 06, 2009 | 2000 Acura TL

2 Answers

Key fob


there is a battery in the back, if it just stopped working, try replacing the battery,

Oct 05, 2009 | Ford Cars & Trucks

2 Answers

Key fob lights up but doesn't work even with a new battery


I'm more familiar with Range Rovers and Saab's when it comes to key fobs but if you changed the battery you have to re-program the key fob. If you do not have an owner's manual that can take you through the steps you might want to try: push and hold the lock button on the key fob, put it in the driver's side door and turn to lock. With the button still depressed turn back to open, remove the key and release the button. If this doesn't work check any and all fuses associated with your system and last but not least you could take it to a dealer. Good luck!

Aug 25, 2009 | 2000 Renault 181

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...