Question about 2004 Infiniti G35 Sport Coupe
How do you replace the tail light brake bulbs in an infiniti g 35 coup.
Tail light bulbs are replaced by removing the tail light housings. The housings are accessed by removing the nuts, the nuts are secured behind the inner trunk liner inside the trunk. Remove fasteners holding liner in place, remove 3 nuts for each housing(i believe it's 3 nuts if my memory serves me right), remove housing and replace bulbs
Posted on Jul 12, 2009
In the trunk, in the rear corners, you'll see some plastic "caps" with tabs on them, similar to wing nuts. Remove those, and the taillight comes right off the back of the car. That will allow you to replace the bulbs.
Posted on Aug 25, 2008
SOURCE: 2001 dodge neon tail lights inop
looking at your schematics and , you say tail lights don't work , you didn't mention if front parking lights and license plate lights are working , they all come from the same source , a black /yellow wire , a good clue if front work and rear don't , please advise .if fronts work then you have a open circuit somewhere between junction S118 (near breakout for left headlamp) and rear sockets.
Posted on Dec 31, 2008
SOURCE: brake light bulb replacement.
Remove panel in trunk (round one on each side) reach inside unscrew toggle bolt then remove the entire taillight assembly, may have to push from inside. When you have the taillight assembly out you will see where the bulb is on the back of the assembly, remove and replace with new bulb. Put taillight assembly back in, replace toggle bolt make sure it is tight and replace panel. It is a pain the first time but I have done this 3 or 4 times it gets easier.
Posted on Jun 27, 2009
Unfortunately, these are not very simple. If you have a factory high mount brake light-meaning not one in a spoiler, you have to remove the rear seats, the rear parcel shelf and then the 3rd brake light. the 3rd brake light I believe is an LED setup which get replaced as an assembly which inserts into the housing. If you need further guidance let me know.
Posted on Jul 12, 2009
This is for Nissan Sentra Models 2007-2010.
1. Open the trunk and remove trunk liner by first removing popcap black button which fastens the liner. Then pull away liner from metal.
2. Notice two white protective plastic spikes covering 2 screw threads with 2 small bolts. Remove white protective spikes manually or by prying them off of their screws and proceed to remove bolts.
4. Pry away entire brake lamp housing from the exterior of the car in swinging door motion towards the sidepanels of the car. Dont pull too hard or let it hang as this may damage wiring - support lamp housing in place.
5. Replace lamp by manually pulling it's housing out of the lamp and then pulling the bulb itself out of socket and inserting new one.
Posted on Apr 29, 2010
Tips for a great answer:
May 10, 2016 | 2004 Infiniti G35 Sport Coupe
Mar 16, 2016 | 2004 Infiniti G35 Sport Coupe
Mar 01, 2012 | 2004 Infiniti G35 Sport Coupe
Jan 22, 2011 | 2004 Land Rover FreeLander
Feb 15, 2010 | 2004 Infiniti G35 Sport Coupe
Sep 27, 2009 | 2004 Infiniti G35 Sport Coupe
Apr 10, 2009 | 2004 Infiniti G35 Sport Coupe
Dec 05, 2008 | 2004 Infiniti G35 Sport Coupe
Nov 21, 2008 | 2004 Infiniti G35 Sport Coupe
2,374 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: