Question about 2002 Ford Ranger Regular Cab

2 Answers

2002 Ford Ranger Clutch Problems

My 2002 Ford Ranger is having clutch problems. When I push in the clutch in order to switch to first gear I can't push the stick in. There seems to be no pressure in the clutch. I have to turn the truck off in order to get into first or reverse gears. Also, when I try to accelerate, the engine (or transmission) starts to slip. What may the problem be?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It's not the clutch, it is the clutch slave cylinder. Check the fluid level in the clutch master cylinder and you will see that it will be empty. The problem is the trans has to be removed to replace it.

Posted on Feb 07, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Your clutch is blown dude & you need to get it replaced.

Posted on Jan 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford ranger clutch problems


Air getting into system, recommend clutch master first, bleed system properly and recheck.

Jan 19, 2014 | Cars & Trucks

1 Answer

How to fix 1995 ford ranger that is stuck on a gear


Does this one have a hydraulic clutch? Check the fluid level in the clutch resivoir.

Nov 27, 2013 | 1995 Ford Ranger Supercab

1 Answer

I am having problems getting my 1998 ford ranger 2.5L into gear. The shifter is loose, and I have to put it in neutral to start it.


If your having to put it in neutral to start because its wanting to move while clutch is pushed in and the transmission is in gear, and shifter gears is rough, then the clutch probably needs replaced, or clutch slave cylinder needs replaced.

Feb 09, 2011 | Ford Ranger Cars & Trucks

1 Answer

Ok i have a 2000 ford ranger has high milage but runs fine until the other day. got off the freeway and would not let me shift out of 5th. so u pushed clitch in and coasted to gas station and stopped it....


Hello Blue, In order to ease your mind some the slave cylinder is inside the bell housing and it will not be in a clutch kit but needs to be replaced and when you have replaced the clutch assembly and slave cylinder,I recommend using DOT5 brake fluid which has a higher boiling point than DOT3 to bleed the system.

Aug 31, 2010 | 2000 Ford Ranger SuperCab

1 Answer

My 2001 ford ranger clutch does not work


common problem with these transmissions have the shift fork replaced its probably aluminum a little is alot for those for wear

Jul 25, 2010 | 2001 Ford Ranger Regular Cab

1 Answer

Hi I have a 2000 model ford ranger 2500 diesel


open the bleed screw on the slave cylinder ,whilst a good looking long legged assistant push the clutch pedal down and you open the bleed screw..If this still doesnt work then check the clutch arm trhow and see how much its moving ,could be you need a new master cylinder

Mar 17, 2010 | 2000 Ford Ranger SuperCab

1 Answer

1997 Ford Ranger


teeth dont line up . on the old clutch the teeth are pushed back. the new clutch the teeth are out more which causes problems lining up. is there a method to line up and/or push the teeth in more

Oct 07, 2008 | 1992 Ford Ranger

2 Answers

Stuck in 5th gear


try bleeding your clutch

Aug 19, 2008 | 1991 Ford Ranger Supercab

Not finding what you are looking for?
2002 Ford Ranger Regular Cab Logo

851 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...