Question about Nissan Frontier
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
well it depends how you want to adjust it, if you want to lower it, back out the screw on the torsion key a couple of turns. raise, screw it in a couple of turns
Posted on May 29, 2008
You need to set all the pressures to 35 psi. first then drive for approx.1/4 mile. If this doesn't work to reset the light (keep in mind the code itself will still be stored even though the light goes off) you will need to take it to your Nissan Dealer to have it scanned as there may be a malfunction with the sensor. If faulty and you are under 36k miles then it should be covered under your factory warranty. Hope this helps.
Posted on Oct 17, 2008
If you haven't figured it out yet, try the two links below. They have pics and diagrams. I haven't done this yet but, Nissan suggesting to have it done. (Sitting in the dealer having oil changed as we speak. They want $90 to replace the 2 filters.) I'm planning on doing it myself to save about $70. Doesn't look too difficult - just a little time. Parts are about $22 at local parts store. hope this helps. (Won't be back on this forum. So won't see any response you submit back).
Posted on Dec 11, 2008
check all the tire pressures first.... then drive it for the next 10-15 miles to reset it.... it worked in my frontier ... I had the same problem as well
Hope that helped
Nissan tech +6 years
Posted on May 06, 2009
SOURCE: location of knock sensor
Knock sensors can be difficult to locate because there usually buried under intake or exhaust manifolds and misc. engine wiring and plumbing. Knock sensors need to hear an engine knocking noise, therefore there usually located somewhere they can hear an engine knock. If it's a V6 then possibly it will be between the cylinder heads and access to them can only be attained by removing the intake manifold. I would suggest calling a Nissan Dealer parts person and ask them. Good luck.
Posted on Jun 16, 2009
Tips for a great answer:
Jun 05, 2015 | Nissan Hardbody Cars & Trucks
Feb 12, 2015 | 2007 Nissan Frontier SE Crew Cab
Oct 23, 2012 | 2000 Nissan Frontier
Sep 17, 2012 | Cars & Trucks
Jun 14, 2011 | Nissan Frontier Cars & Trucks
May 25, 2017 | 2000 Nissan Frontier
Dec 22, 2009 | 2007 Nissan Frontier SE Crew Cab
Mar 16, 2017 | 2005 Nissan Frontier
Apr 05, 2009 | 2007 Nissan Frontier SE Crew Cab
20 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: