Question about 2004 Chrysler Pacifica

Open Question

Where is belt tensioner hole on 2004 chrysler pacifica

I am changing the alternator and I can't relieve the tension on the belt.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
autotherapis
  • 501 Answers

SOURCE: serpentine belt diagram

Try this picture, it is a little hard to see, but if you have a program on your computer like power point copy and paste it to a frame and you can enlarge it to see better

http://media.photobucket.com/image/04%20pacifica%20serpentine%20belt/RallyVermont/engine2.jpg

Posted on Oct 01, 2009

Ad
  • 47 Answers

SOURCE: 2006 Chrysler Pacifica serpentine belt routing

here are a couple diagrams...
1e7d361.jpg

011a835.jpg

If you need anything else, let me know.

Posted on Mar 19, 2010

johnjohn2
  • 5763 Answers

SOURCE: were is the belt tensioner located on my 08

heres a diagram to show you the components, hope this helps,f87aa9c.png

Posted on Apr 06, 2010

  • 1024 Answers

SOURCE: serpentine belt routing for 2004 chrysler pacifica

here it is

98c85ed.gif

Posted on Apr 13, 2010

  • 14 Answers

SOURCE: How do you release the serpentine belt tensioner

Check youtube for a video on it.

Posted on Dec 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change alternater in a 2004 chrysler pacifica


to remove your serpentine belt and alternator you will need a long 3/8 drive rachet or a special tensioner remover set you can rent from autozone. then you need a rachet set from 10 mm to 15 mm,
before to do anything you have to dsiconect the battery, startin with the negative cable (-) then the positive (+), then remove the big wire from the alternator, removing the nut (10 or 12 mm) then the electric conector ( unlocking tab). then look for the tensioner , at the battom of it it has a square hole where you need to insert the 3/8 drive tool or rachet, pull to the right, you will see the serpentine belt begin to be loose. remove the serpentine belt and alternator by loosing the bolts that are attached to the alternator. to install it folow the same. but backwards. good lock

Dec 02, 2013 | 2004 Chrysler Pacifica

1 Answer

Need to take out the alternator and can't find any thing to relieve the tension of the belt


year make and model ? If it is a serpentine belt, there should be a belt tensioner pulley you move.

Jul 11, 2013 | Cars & Trucks

1 Answer

Tensioner location on 97 chrysler sebring 2.5L 6 cyl


The tensioner pulley looks like an idler pulley, only with an adjusting bolt protruding out about 2 inches from just behind the pulley. Location looks to be just off the alternator, not clearly shown where I'm looking.
To loosen belt, you loosen the tensioner pulley nut, and then turn the adjusting bolt in to relieve tension. When putting the belt back on, adjust tension with adjustment bolt, then tighten the pulley nut. This is for Sebring Coupe, Convertible is different. Good luck.

Jun 22, 2012 | Chrysler Sebring Cars & Trucks

1 Answer

2004 chrysler pacifica replace alternator


Pull cover off top of engine. Stick 9 volt battery adapter in lighter hole to save radio and computer settings. This is optional. You can get one for less than ten dollars. Remove negative battery cable. Remove air cleaner box on left side. Take special tool or what ever will fit in the belt tensioner hole pull back and remove belt from alternator pulley. Tie belt up with a piece of string so it doesn't drop. Remove alt brackets and wires and reinstall.

Sep 29, 2011 | 2004 Chrysler Pacifica

1 Answer

How to replace the belt tensioner?


On the right side of engine locate the alternator at the very back, directly below it is the tensioner. There is a square hole a 3/8" ratchet will fit into. Turn counter-clockwise to relieve the tension, at the same time remove the belt from the alternator pulley, let relax. In the center of the tensioner portion (not the pulley for the tensioner) there is a bolt. Remove the bolt and the tensioner. When installing new tensioner there is an alignment pin on the rear, make sure it fits in the alignment hole before tightening the bolt (it will break new tensioner). tighten the bolt, reinstall ratchet head relieve tension, and reinstall belt. Be careful with the belt when loose, that you don't lose the directional routing. There should be a diagram on a bracket just above the water pump, but if not draw it out before removing the belt.

Jan 30, 2011 | 1999 Oldsmobile Silhouette

1 Answer

Replacing a water pump on a 2004 pacifica


Release fuel pressure.Remove neg battery cable. Drain cooling system.Remove front cover.Remove timing belt. Remove water pump. Remove timing belt tensioner and slowly compress in vice. Install water pump then install tensioner and belt. timing belt runs water pump!

Sep 02, 2010 | 2005 Chrysler Pacifica

2 Answers

I am installing a timing belt on a 2004 chrysler pacifica and i need help!


Click on the following: free, direct Link. It has several Diagrams including the Serpentine Belt Diagram for your 2004 Chysler Pacifica 3.5L DOHC V6. It has the Instructional and Directional Diagrams that will help you.

http://www.2carpros.com/car_repair_information/year/2004/make/chrysler/model/pacifica/2004_chrysler_pacifica_drive_belt_routing_diagram.htm

Standard Rules for Installing the Serpentine Belt with an Automatic Tensioner:
a. Pick a Pulley that is most easily accessed. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench (See Diagram in Link: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.
Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

Apr 03, 2010 | 2004 Chrysler Pacifica

1 Answer

How do you change the serpentine belt on a 2004 Trailblazer?


Note the drive belt routing, usually there is a sticker under the hood with the routing. using the right socket and a breaker bar, rotate the drive belt tensioner clockwise to relieve tension. remove belt and slowly release breaker bar tesnsion. for V8, Install on all pulleys except generator, loosen tension and install on generator. for 4.2L install belt over all pulleys except tensioner, relieve tension and install over tensioner, slowly release breaker bar tension.

Mar 12, 2010 | 2004 Chevrolet TrailBlazer

2 Answers

Do you have a diagram on how to install a serpentine belt on a 1994 Chrysler LeBaron?


1994 CHRYSLER LEBARON - V6 3.0L 2972cc 181ci GAS FI N 3

Open the hood, the diagram for the serpentine belt is on the cowling.

From DAYCO Catalog
Belt Routing Diagram (Alt., P.S., Idler & Tens.)
9e1b1eb.jpg


From comments to other users and Lebaron Owners; for remove, starting at the alternator pulley and going clockwise around the pathof the belt, the belt drops down and forward and goes under the idlerpulley, continues forward and less steeply downward and goes around thecrankshaft pulley clockwise, rises rearward going over the top or thetensioner pulley counterclockwise, then drops down and around the powersteering pump clockwise and rises to go around the alternator pulleyclockise (which is where I started the description). To loosen thetension to remove the belt, or to give you slack to install the beltwithout having to force it over a pulley while under tension you rotatethe tensioner pulley arm around its pivot clockwise according to the'94 shop manual. It doesn't show by what means to effect this rotation,but in the earlier manual I have ('89) it shows there to be a 1/2"square hole in the tensioner arm into which you insert a breaker barwith a 1/2" square drive which gives you the temporary lever to rotatethe tensioner against its spring action. I assume there is a similar1/2" square hole on the '94 you are working with. Interestingly,between '89 and '94 the idler pulley was added, and the requiredrotation of the tension arm changed from counterclockwise to clockwiseto relieve the tension."

I think this will help you get the belt on. Good luck.

Oct 13, 2009 | 1994 Chrysler LeBaron

1 Answer

Trying to change alternator belt on a 2004 dodge sx is there a secret


you need to locate the tension-er and the use of a ratchet 1/2 inch i believe will do the trick and counterclockwise to relieve tension and the remove old belt and reverse procedure for re-installation

Aug 09, 2009 | 2004 Dodge Neon

Not finding what you are looking for?
2004 Chrysler Pacifica Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...