Question about 2004 GMC Envoy

1 Answer

How do remove the cover from the headlamp bulb 2003 envoy

How do i remove the cover from the headlamp bulb for a 2003 envoy

Posted by on

  • newz Jan 18, 2009

    I was hoping to find out the answer to this same question for my 2002 Envoy.
    I have the replacement bulb but can't figure out how to snap out the plastic cover to change it. Frustrating!


×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Open the hood.
there are 2 small steel "tabs" which you need to pull straight up.
once these are in the up position, pull headlight assembly forward.
remove plug connector to headlight, prying the wiring tab with a screwdriver.
rubber cover can be pulled off exposing the back of the headlamp bulb.

Posted on Sep 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace marker light


Removal Procedure
  1. Open the hood.
  2. Remove the headlamp. Refer to Headlamp Bulb Replacement .
  3. Rotate the bulb and socket counterclockwise in order to remove the bulb and socket from the housing. Remove the side marker bulb (3) or turn signal/park bulb (4) from the socket.

Oct 01, 2015 | 2005 GMC Envoy

1 Answer

How do I replace the headlight assembly MN133516


The 2003 Outlander utilizes replaceable (9007) headlight bulbs. If you're looking to replace the bulb(s);
1. Raise the hood.
2. Remove the plastic cover at the rear of the headlamp assembly by rotating it counterclockwise, and pulling it off. This will allow access to the headlight bulb.
3. Twist the bulb socket counterclockwise in order to remove it from the headlamp assembly. Pull the old bulb out of the socket, and use a clean cloth to install the replacement bulb. Do not touch the glass of the new bulb.
4. Place the socket back into the assembly, and twist it clockwise. Reattach the plastic cover, and close the hood.
Are you needing DIY instructions for replacing the entire headlamp assembly? Left (driver) or Right (passenger)?

Jan 18, 2013 | 2003 Mitsubishi Outlander

1 Answer

Changing headlamps


Above each headlamp assembly there are two tabs that when lifted up, will release the headlamp assembly. Once released, it can be pulled out of the body panel. On the rear of the assembly are two large rubber covers, for the low beam remove the upper cover and this will expose the lamp socket. Twist the socket CCW to release the socket. Then change the bulb.

Aug 15, 2012 | 2004 GMC Envoy

2 Answers

How do I replace front headlight bulbs?


To replace a headlamp bulb, do the following:

1. Open the hood.

2. Remove the rubber

cover and socket from
the headlamp.

3. Release the retainer clip holding the bulb by

pressing down and moving the metal retainer away

from you.

4. Pull the bulb out of the fixture.
5. Reverse the steps to install a new bulb.
You can get a free owners manual at this site (where i got your info)
http://www.automanualonline.com/base/chevrolet/tracker/2003/2003-chevrolet-tracker-owners-manual/
It's free just enter the code they give you and Save or Open it. I'd save it. The site is safe.

Mar 10, 2011 | 2003 Chevrolet Tracker

1 Answer

How to change headlight lamp in 2005 Pontiac g6


To change the bulbs you need to first remove the 5 plastic pop screws on the front bumper. They're spread out at the top of the bumper right under the hood. Once you get those out, you have to remove the two hex bolts on each headlight. Then it gets tricky. You need to pull the light towards the front of the car until it pops out of the ball-bearing type mount on the fender. Once that pops out, you have to pull the front bumper forward while maneuvering the headlight out towards the front.

As per the manual it says as follows:---

Open the hood.

Hold the headlamp to prevent damage to the headlamp or to the fascia. Remove the bolts from the headlamp assembly. Remove the push-in-retainers across the front fascia. Remove the headlamp assembly. Lift the headlamp upward to release the locating tab from the front edge of the fender.

Disconnect the electrical connector from the headlamp assembly.

Remove the headlamp bulb access cover by rotating the headlamp bulb access cover counterclockwise, if necessary.

Remove the headlamp bulb from the housing by rotating the socket counterclockwise, if necessary.

Disconnect the headlamp bulb electrical connector, if necessary.

Remove the park/turn bulb access cover by rotating the cover counterclockwise, if necessary.

Remove the park/turn bulb from the housing by rotating the socket counterclockwise, if necessary.

Gently pull the park/turn bulb from the socket, if necessary. Install the park/turn bulb into the bulb socket.

Install the park/turn bulb socket into the headlamp housing by rotating the socket clockwise.

Install the park/turn bulb access cover by rotating the cover clockwise.

Connect the headlamp bulb to the headlamp electrical connector.

Install the headlamp bulb into the headlamp housing. Rotate the socket clockwise until locked.

Install the headlamp bulb access cover by rotating the cover clockwise.

Position the headlamp assembly to the vehicle. Lift the headlamp upward to release the locating tab to the front edge of the fender.

Install the bolts to the headlamp assembly. Tighten the bolts to 2 N·m (18 lb in).

Install the push-in-retainers across the front fascia.

Close the hood.

----------This will help.thanks.Helpmech.

Dec 25, 2010 | Pontiac G6 Cars & Trucks

1 Answer

Need to change headlight bulb in gmc envoy 2003


Drivers side- stick your hand behind the headlight and remove the rubber cover, and twist out the light.

Passenger side- remove the air cleaner top, and move the air cleaner out of the way. You now have complete access to this side to remove the rubber boot covering the bulb.

Dec 22, 2010 | 2003 GMC Envoy

1 Answer

Need to replace the headlight assembly on front passenger side do i have to take off the bumper? for ponitac vibe 2003 also have dent on the area


Yes you do. This is the steps to do that to replace the entire headlight assembly:


Remove the front fascia.
  • Remove the front fascia extensions, if equipped.
  • Remove the front fender liners.
  • Remove the fog lamps.
  • Remove the bolts (4) from the front bumper fascia (3) at the fender.


506bafd.gif

Remove the bolts from the front bumper fascia at the fender



  • Remove the push-in retainers (2) from the bumper fascia using J38778.
  • Remove the fascia bolts (1) from the fascia.
  • Remove the fascia from the vehicle.
  • Remove the 3 bolts which secure the composite headlamp.


  • 7f1ec16.gif

    Remove the 3 bolts which secure the composite headlamp



    1. Remove the sidemarker bulb electrical connector.
    2. Remove the sidemarker bulb, if necessary.
    3. Remove the composite headlamp assembly from vehicle.

    To install:

    1. Install the sidemarker bulb to the composite headlamp, if removed.
    2. Connect the sidemarker bulb electrical connector.
    3. Secure the composite headlamp to the vehicle with the 3 bolts. Tighten the headlamp mounting bolts to 89 inch lbs. (10 Nm).
    4. Install the front fascia.
    5. Install the headlamp bulb to the composite headlamp, if removed.
    6. Fasten the headlamp bulb retainer clip.
    7. Install the socket to the headlamp bulb.
    8. Install the rubber cover to the composite headlamp.
    9. Aim the headlamps.
    10. Close the hood.

    Oct 12, 2010 | 2003 Pontiac Vibe

    1 Answer

    Change headlinght bulb


    SECTION 417-01: Exterior Lighting 2005 Freestyle/Five Hundred/Montego Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 03/14/2005 Headlamp Bulb adobe.gif Printable View (327 KB) Freestyle, Five Hundredn0035265.gif
    Item Part Number Description 1 — Headlamp bulb electrical connector (part of 14290) 2 13N021 Headlamp bulb

    Montegon0035266.gif
    Item Part Number Description 1 — Headlamp bulb access cover screws (6 required) (part of 13006) 2 13N019 Headlamp bulb access cover 3 — Spring retainer (part of 13006) 4 13N021 High intensity discharge (HID) bulb 5 14A411 HID bulb electrical harness 6 — High beam bulb electrical connector (part of 13006) 7 13N021 High beam bulb Removal and Installation
    ani_caut.gif WARNING: The headlamp bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the bulb only by its base. Avoid touching the glass envelope. Failure to follow these instructions may result in personal injury.
    NOTE: The headlamp bulb should not be removed from the headlamp assembly until just before a new bulb is installed. Removing the bulb for an extended period of time may affect headlamp bulb performance. Contaminants may enter the headlamp assembly where they can settle on the lens and reflector. Never turn on the headlamps with the bulb removed from the headlamp assembly.
    NOTE: Make sure the headlamp switch and ignition switch are in the OFF position.
    Freestyle, Five Hundred
    1. Rotate the headlamp bulb 1/8-turn counterclockwise and remove the headlamp bulb.
      • Disconnect the electrical connector.
    Montego
    1. Remove the headlamp assembly. For additional information, refer to Headlamp Assembly — Five Hundred, Montego in this section.
    1. Remove the 6 screws and the headlamp bulb access cover.
    Montego high beam bulb
    1. Rotate the headlamp bulb 1/8-turn counterclockwise and remove the headlamp bulb.
      • Disconnect the electrical connector.
    Montego HID bulb
    1. Release the spring retainer and remove the HID bulb.
      • Disconnect the electrical connector.
    All vehicles
    1. To install, reverse the removal procedure.

    2010&c18=modelyear&c20=n920901&c35=wsm%2cheadlamp%20bulb%2cs5f%2c417-01%2cremoval%20and%20installation&s=1600x900&c=32&j=1.3&v=y&k=y&bw=1171&bh=582&ct=lan&hp=n&[aqe]

    Apr 02, 2010 | 2005 Ford Five Hundred

    1 Answer

    2004 Lincoln Navigator Low Beam Bulb replacement


    your owner manual will list the bulb. It is expensive. tascafordparts.com for discount from Ford Dealer

    here's 2003, don't have 2004

    Navigator high intensity discharge (HID) headlamp
    1. Remove the front radiator air deflector.
    1. Remove the three bolts and the headlamp assembly.
      • Disconnect the electrical connectors.
    1c293b4.gif
    8. Remove the headlamp bulb protective cover(s).
    • Remove the HID lamp cover.
    • Remove the high beam cover.
    • Disconnect the electrical connector and push the grommet into the headlamp assembly.
    7adecf7.gif
    1. Release the spring tabs and remove the HID low beam bulb.
    3394a45.gif

    Apr 11, 2009 | 2004 Lincoln Navigator

    1 Answer

    Replace low beam headlamp, passenger side, 2004 Navigator


    Remove the front radiator air deflector.
    Remove the three bolts and the headlamp assembly.
      • Disconnect the electrical connectors.
    ef5d2b9.jpg
    Remove the headlamp bulb protective cover.
    1 Low beam cover. 2 High beam cover.

    babb381.jpg
    b8093f8.jpg

    Feb 13, 2009 | 2003 Lincoln Navigator

    Not finding what you are looking for?
    2004 GMC Envoy Logo

    Related Topics:

    232 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top GMC Experts

    yadayada
    yadayada

    Level 3 Expert

    63291 Answers

    Freddy

    Level 3 Expert

    1311 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21981 Answers

    Are you a GMC Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...