Question about 2006 Chevrolet Silverado

Open Question

2006 silverado service brake system indicator keeps beeping

How do I turn it off?

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
fyrebyrd1
  • 121 Answers

SOURCE: Remove service brake system display from dashboard?

Check ABS system for codes. I have an '03 Silverado and have a faulty EBCM( Electronic Brake Control Module, "ABS module"). Can't reset anything. Only replacement of EBCM will fix it. Incidentally, if you have to replace it, you can check on Ebay for a rebuilt unit. You shouldn't have an issue with your "base" braking system though, if this is the case. ABS is electronically controlled and with or without it, your brakes will still function. I hope this helps.

Posted on Nov 19, 2008

Ad
  • 8 Answers

SOURCE: How do I reset the

Fully press and release the accelerator pedal three times within five seconds. I think that's for all light resets.

Posted on Aug 24, 2010

  • 836 Answers

SOURCE: my 2006 chevy silverado has

could be low fluid.

Posted on Jan 14, 2011

canwoodjc
  • 3301 Answers

SOURCE: Have a 2006 Chevy Silverado.

check the contacts in the socket itself, with the newer tail light and brake light bulbs and the thin wire they use for contacts, any dark or slightly burned areas will cause the bulbs to burn out prematurely

Posted on Jul 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Buick rendezvous traction control alarm going off periodically and service traction control system soon lights turn on. Also lights indicate that my abs and parking brake have been disabled


Need to get the codes read. Probably a bad wheel speed sensor which will require a replacement wheel hub assembly. All of those systems rely on the wheel speed sensors to operate properly. The brake light is not indicating that the parking brake is disabked, rather that the is an issue with the braking system

Sep 09, 2016 | 2006 Buick Rendezvous

1 Answer

Have a 2006 Chevy Silverado. The left brake light keeps shorting out. Turning light OK.


check the contacts in the socket itself, with the newer tail light and brake light bulbs and the thin wire they use for contacts, any dark or slightly burned areas will cause the bulbs to burn out prematurely

Jul 13, 2011 | Chevrolet Silverado Cars & Trucks

1 Answer

I have a 2006 Chevy Trailblazer, the problem I am having is the brake sensor light will not go off and it keeps beeping. I was low on brake fluid and put some in however the light and beeping will not...


{: ) The brake fluid sensor is very important because it will tell you through the warning indicator if the fluid level is critical, specially while you are driving on road. You can try a few steps just to rule out some possibilities. Better if engine is off, but keep ignition on while proceeding with tests. Transmission in Park position,and the parking brake DISENGAGED fully.

Sometimes its not enough to put some, better complete fill to max level. Check again the sensor light..
If same problem, try to remove the brake fluid sensor connector. Check again.
If the connector has two wires, use a thin jumper wire to connect the two ends. Check again.

If Yes progress, then you need to replace the brake fluid sensor.
If still No progress, return the connector to its place. It's possible the parking brake switch is shorted, or the wires shorted to grouind. The system may need to be checked thoroughly.

Jun 05, 2011 | 2006 Chevrolet Trailblazer

1 Answer

What brake ststem do 2001 silverados have? rear brakes


Hi. Your 2001 Chevy Silverado is equipped with Antilock Brake System (ABS). You will identify also if your car is equipped with ABS by looking at the instrument panel for a yellow ABS indicator light after you turn on the ignition.

All the best!

Nov 10, 2010 | 2001 Chevrolet Silverado 1500

1 Answer

The mechanic says my brake fluid is contaiminated at 52,000... does it need rep[lace?


There may be something other than brake fluid in your master cylinder and brake fluid test strips can detect that. Another way to tell is if the rubber seal in the master cylinder cap is swelling up. Flushing the system for other than contaimination is a good idea to keep your brake system operating more efficiently

Sep 05, 2010 | 2006 Chevrolet Silverado 1500 2WD

2 Answers

I have to lights that keep coming on, the first light is a car with a sgiggly line and a wrench next to it. the second light is a car with squiggly line under it


There is a malfunction in the StabiliTrak system.
The only fix is to take it to the dealer. They will more than likely pull a diagnostic trouble code {DTC c0196} and reprogram the EBCM (Electronic Brake Control Module).

This is common problem with
2006-2007 Buick Rainier
2006-2009 Chevy Trailblazer
2006-2009 GMC Envoy
2006-2009 Saab 9- 7X
2006-2009 Isuzu Ascender

Diagnosing and reprogramming is a simple procedure, and most dealers won't charge you to do this service.

Best of luck!

Mar 02, 2010 | 2006 GMC Envoy

1 Answer

My truck ran out of gas . Pulled over,parked, shut truck off. Put gas in , now my truck won't start. I have no indicator showing what gear i am in. Still shows low gas, Can put transmission in any position...


I had the same thing happen to my 2003 saburban, it turned out to be a 20 amp fuse for the PMC located in the fuse panel under the hood.

Keith, California

Nov 04, 2009 | 2003 Chevrolet Silverado 2500HD

1 Answer

Brake light,abs light and service brakes message came on at same time


you may need brakes if they are low this can couse this but if its not that you need to find some one that can get the code for you out of the system

Aug 26, 2009 | 2006 Chevrolet Silverado 1500 2WD

1 Answer

Remove service brake system display from dashboard?


Check ABS system for codes. I have an '03 Silverado and have a faulty EBCM( Electronic Brake Control Module, "ABS module"). Can't reset anything. Only replacement of EBCM will fix it. Incidentally, if you have to replace it, you can check on Ebay for a rebuilt unit. You shouldn't have an issue with your "base" braking system though, if this is the case. ABS is electronically controlled and with or without it, your brakes will still function. I hope this helps.

Nov 12, 2008 | 2000 Chevrolet Silverado

Not finding what you are looking for?
2006 Chevrolet Silverado Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...