Question about 2009 Chevrolet Aveo
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
remove grease cap,brake caliper, then remove nut holding rotor now remove rotor, remove grease seal now both bearings should be out ,if replacing races then punch them out and tap new ones in, repack new bearings with grease install rear one and install new grease seal, slide rotor on slide frt bearing on, install washer and nut, tight a little to nearest cotterpin hole,put cotterpin in and put caliper on, hope this helps,good luck.
Posted on Oct 27, 2009
There is a special socket for O2 sensors which allow the wires to stick out and not get twisted up. It's not expensive and available at most auto parts stores. Disconnect the sensor from the wiring harness, with the plug and then use the socket to remove and replace the new sensor. Re-connect electrical plug.
Please rate this answer. Thank you.
Posted on Apr 08, 2010
Tips for a great answer:
Apr 22, 2015 | 2009 Chevrolet Aveo
Sep 22, 2012 | 2005 Chevrolet Aveo
Jan 29, 2012 | Chevrolet Aveo Cars & Trucks
Jul 05, 2010 | Cars & Trucks
Apr 08, 2010 | 2004 Chevrolet Aveo
Feb 18, 2010 | 2004 Chevrolet Aveo
Feb 03, 2010 | 2004 Chevrolet Aveo
Jan 10, 2010 | 2004 Chevrolet Aveo
454 people viewed this question
Usually answered in minutes!