Question about Cars & Trucks
The car does not want to start and when it does it hardly runs and shuts off
For a 2000 Honda Accord LX, the check engine code P1456 simply means that your gas cap is off or isn't tight enough. It wont go off immediately. It make take up to a weak for the check engine light to turn off once the gas cap is tightened enough.-------------------------------------------------------------------------------------
Renault CAN Clip
Posted on Dec 10, 2012
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
po505 idle air control if this is the code all hondas do it eventully, small problem easy fix u have 2 choices either remove the idle air control motor and clean the inside of it u will find it's black and the spring inside is stuck clean it with carb cleaner or gum cutter any parts store will have this it's a dirty job it will work for awhile but to replace it is recommended its not expensive for a new one which u can get at any autoparts store autozone,advanced,napa etc. there is only 2 bolts in most cases maybe 3 i doubt it though if u go online t google and type in th eyear make and model and engine size in ur case it's a 3.0 v6 and look for idle air control locations u'll find it to do this job a shop will charge u anywhere from 100.00 for diag to retrive the code plus the part and the labor so about 250.00-375.00 it will only take u honestly maybe 15 minutes to perform only tools needed are a 10 millimeter wrench there is only 1 connector to disconnect and ur done if u do this u will still have the check engine light because u have not cleared it from the computer to do this just disconnect the negative battery terminal (the black one or has a neg sign - don't disconnect the positive side +)for 5 minutes then reconnect and the computer will have reset no more light. good luck it really is that easy
Posted on Oct 10, 2009
sounds like a possible bad ground wire, you will need to find out where these 3 items ground and see if they have a ground point in common.
Posted on Oct 13, 2009
Tips for a great answer:
Nov 05, 2016 | 1995 Honda Accord
Jan 09, 2014 | 2000 Honda Accord
Sep 02, 2017 | 2000 Honda Accord
May 17, 2010 | 1990 Honda Accord
Jun 14, 2009 | 1990 Honda Accord
344 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: