Question about 1999 Dodge Ram

1 Answer

Late shift from 1st to 2nd changes into 2nd at 25 mph (1999 dodge ram 1500)

At moderate take off it ravs up to 25 or 30 mph before changing into 2nd. at turtle take off it changes at about 15 mph. i don,t want to think about transmission because that $$ signs. please help.

Posted by on

1 Answer

Think about it--- because all you can do- is remove &
clean the valve body

After that- it comes out for a rebuild

Back probe the TPS Sensor & see what that looks like

Posted on Dec 10, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

rockitman187
  • 2559 Answers

SOURCE: 1999 Dodge Ram 1500 2WD won't shift properly

Sounds like the speed sensor on the rear axle.

Posted on Jan 20, 2009

  • 1 Answer

SOURCE: transmission does not always shift into overdrive

Governor pressure sensor or solenoid is going bad. To replace them drop the tranny pan, remove the filter , and the parts are pretty ez to get to. These aren't cheep thou, but replace them as a set. Parts will probly run about $200.

Posted on Feb 20, 2009

  • 1 Answer

SOURCE: Transmission won't shift from 1st to 2nd gear on it's own

Have someone scan the transmission for bad shift sensors.

Posted on Apr 28, 2009

  • 718 Answers

SOURCE: Where is the reverse light switch on a 1999 Dodge Ram 1500 with automatic transmission located?

Look on the gearshift lever. You will have remove the cover to get to it.

Posted on May 08, 2009

  • 582 Answers

SOURCE: Dont know what kind of Transmission my dodge has

ON THE BOTTOM OF THE TRANY THERE IS A TAB ON THE SIDE OF THE TRANY ON THE BOTTOM LIP WHERE THE FILTER PAN IS BOLTED THE NUMBERS ARE STAMPED ON THE TRANY HOUSING ON THE BOTTOM NEXT TO THE PAN

Posted on Aug 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dodge Ram 3500 skips from 1st to 3rd gear, had rebuild after still the same issue. Any advice?


Governor pressure controls the 1st and 2nd shifts. After that is the 3 and 4 solenoids. you would need to look at the pressure when driving(takes a scanner). pressure is 20 to 30 PSI from 1st to 2nd, depends on acceleration. After that the pressure will jump to 100+ psi. Did you replace the governor solenoid and sensor? They are on the passenger side of the transmission and sit in a block that detaches from the valve body.

Sep 22, 2016 | 2005 Dodge Ram 3500

2 Answers

1997 dodge ram 1500 4x4 abs light on runs fine idles good but put it into gear wont go past 35 mph engine running smooth even at 35 mph


Bernard's Blog: Dodge Transmission Output Speed Sensor

bernardsblog.blogspot.com/.../dodge-transmission-output-speed-sensor.h...
Sep 8, 2009 - My 99 Dodge 2500 Ram won't accelerate..transmission is NOT slipping,.... It has been running fine and the check engine light even cleared itself yesterday.... So it wouldn't go into first gear and then 3 minutes later my check engine ... I have a1997 Dodge Ram 1500 with a 5.9L instead of the stock 5.2L. It ...

Dodge Ram Idle and Stalling Problems - Car Forums at Edmunds.com

forums.edmunds.com > Dodge > Dodge Ram Pickup 1500

Aug 17, 2011 - 30 posts - ‎25 authors
Learn more about Dodge Ram Pickup 1500 at the Edmunds.com ... The crank sensorwas put on however it started stalling again. ... The truck starts fine, but will only runat 2000's RPM and only then if .... Then as I start driving about 1/3 of a mile go dead again, I knockout of gear, crank back up immediately.

WILL NOT GO OVER 30MPH WITH PEDLE TO METAL ...

repairpal.com > Questions > Dodge > Charger > 2006 Dodge Charger
I WAS DRIVING FINE AND THE CAR ACTED LIKE IT GOT STUCK IN ... Then the transmission didn't want to change into 2nd gear. .... Whenever i start up my car theabs and esp light turn on and when i try driving it doesnt go over 30 mph even .... in neutral but not it just wont go up hills and i think it has something to do with

Jan 07, 2016 | Dodge Cars & Trucks

1 Answer

Can a faulty speed sensor in a 96 dodge ram automatic make it only read 1st and 2rd gear


not likely, the speed sensor sends the info to the pcm and will affect gear change, though its highly unlikely that the speed sensor can make the pcm "read" first or second gear, speed sensor sends info to the pcm to help it decide when to shift gears/apply abs/ etc

Mar 30, 2013 | Cars & Trucks

1 Answer

1999 3500 dodge 4x4 dually, 47re Tranny. problem existed before and after having my Tranny rebuilt. tried 4 new valve bodies even a new BD VALVE BODY. Truck starts out in 2nd gear when put into...


the transmittion keeps shifting in & out of gear between 45 & 50 mph it shifts to a higher gear then a lower then higher then lower till I get above 50 mph whats the problem & how to fix it

May 03, 2011 | 1999 Dodge Ram

1 Answer

I have a 1999 dodge 1500 2wd truck w/a 5.9 engine and a 3speed automatic w/OD. The tranny does not want to shift gears on its own, until hits about 2500rpm. Slips back& forth between 1st & 2nd when...


yes sounds like the one of your transmission shift solenoids is out or going out on you check them out see if can see if wires loose or if they are faulty try get a diagram see if can find out which solenoid controls 1 and 2 gear theres 4 solenoids total i believe but this is your problem

Sep 15, 2010 | 1999 Dodge Ram

1 Answer

1999 Dodge Ram 2500 Pick-up speedometer does not start working until about 25 MPH above 25 or 30 is OK


speed sensor (or in my experience with these trucks is right on the rear end) thats where i have changed mine. its sits right on top of the hog head.

Aug 24, 2010 | 1999 Dodge Ram 2500 4WD

1 Answer

Dodge rm 1500 idles rough


Could be a restricted catalytic converter. Tap converter with hammer and see if it rattles. if does, replace it.

Nov 08, 2009 | 2004 Dodge Ram 1500

1 Answer

1999 DODG 3500 AUTO TRANS SHIFTS TO 2ND WITH A LITTLE HELP


I have a 1999 Ram B 1500 Van, auto transmission, 5.9 L engine.
Same problem, trans hesitates in 2-3 upshift, sometimes 1-2
to 2-3 upshift. Posts trouble code P1756 - Transmission Govenor pressure too low at below 15 to 20 Psi. Transmission pump shot or valve body leak stops trans from reaching proper pressure to shift, which is minimum 15 Psi.
Either trans is leaking in valve body, valve is stuck, shift solenoid on valve body is sticking, or pump is shot.

Feb 14, 2009 | 1999 Dodge Ram

Not finding what you are looking for?
1999 Dodge Ram Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...