Question about GMC Cars & Trucks
Chunky means buck a little when in 3rd gear.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i went under for driver side then i took off passenger side wheel you also have to remove two bolts that are holding dipstick tube in place it is easy to get them from the wheel well on passenger
Posted on Nov 17, 2008
SOURCE: 98 Civic Auto Trans Slippage
you need to replace clutch pack for that gear can be ordered seperately from parts store or dealer if you want to save money call peach street auto recycling at 1800-365-2341 for a warrantied used one! also might be time for change trans filter and fluid filter could be slightly clogged but I lean towards clutch pack I replace these alot on Hondas
Posted on Feb 04, 2009
P0753 means your powertrain computer detects a continuous open, short to ground or short to power in the circuit to your transmission's 1-2 shift solenoid. When the code is active, your transmission runs in a fail safe/limp home mode that only lets certain gear ratios function in the transmission.
The solenoid in your application looks like this
and it is located sometimes on the side of the transmission, but my guess is from the looks of it, it might be found inside the transmission, only accessible with the oil pan removed.
The problem might be the solenoid itself, or the wiring going to the solenoid from the computer that controls the transmission, or the computer itself.
Posted on Sep 09, 2009
O/D light blinking won't shift into 3rd or 4th error codes are P1624,P0733,P0734. could this be solenoids? can i replace it at home?
Posted on Mar 27, 2010
check or replace your thottle position sensor tps that trans needs to know where the throttle is to shift if it is bad it will do as you say wont shift to third
another telltale is it will act like it goes into lockup when shifting into reverse and stall the engine
Posted on Feb 19, 2011
Tips for a great answer:
Aug 30, 2015 | GMC Cars & Trucks
May 31, 2011 | 2003 GMC Safari
Jul 15, 2010 | 2003 GMC Safari
Apr 22, 2010 | 2000 GMC Safari
Oct 05, 2009 | 2000 GMC Safari
Sep 09, 2009 | 2003 GMC Envoy
66 people viewed this question
Usually answered in minutes!