Question about 2002 Ford Thunderbird

Open Question

Remove door panel on 2002 thunderbird

Window off track

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Thunderbird Windows

There is a complete series of instructions in the 2002 owner's manual about how to reprogram the "glass drop". I don't have the manual available at the moment, but I did mine and it was easy. You raise the glass and HOLD the button for 2 - 3 seconds and then drop the glass and do the same routine on the close... or something like that. It';s all there in the manual on the section about the side glass.

Posted on Aug 28, 2008

chuck943
  • 783 Answers

SOURCE: How to remove the door panel on a 96 Ford Thunderbird?

Carefully pull front door trim panel finish panel away from front door trim panel.
Disconnect wires from front door lock switches, outside rear view mirror controls and window regulator control switches, if equipped. Remove front door trim panel finish panel.
Remove front door trim panel retaining screw through front door trim panel finish panel opening.
Remove interior lamp lens cover.
Remove screw through interior lamp opening.
Slide front door trim panel upward to disengage hooks.
Rotate top of front door trim panel away from front door and lift bottom hooks from front door.
Disconnect window regulator jumper wire
Remove front door trim panel.

Posted on Feb 21, 2009

  • 4 Answers

SOURCE: need to remove rear right side door panel to fix the window

More that likely, the plastic guides that run up and down the "window regulator" are broken. If you take off the door panel, check for broken plastic pieces in the inside of the door shell. It is a common problem. However, the fix is not that easy - or cheap. It requires replacing the entire "regulator" with a new one. The repair requires removing the door panel, taking off the screws that hold the dual rail regulator and cables and unplugging the motor. The new regulator is about $70 from RockAuto.com or you can order from Autozone for around $105-115. I can't find anyone who sells it without the motor which is probably not bad. However, replacing the whole thing is much easier anyway. I'd suggest that you get the new one before you remove the old one. It is a lot easier to see how to take it out if you know what it looks like.

Posted on May 18, 2009

jim9813
  • 124 Answers

SOURCE: power windows are failing

Fords are known to have faulty window switches. However, I've replaced alot of motors and regulators, too. Lubing the regulators, or tracks, is a good start. Find something called mini-vent lube and get that into the window runs. To remove the trim, well ford does that many ways, so without doing it myself, I can just tell you find all the screws and bolts all around the trim, bottom and sides. look in the armrest and see if there is a cover, there may be a couple fasteners in there. look behind the pull handle. the trim behind the pull handle(the thing that opens the door) may have to be removed to access another bolt. finally, ford does the final removal 2 different ways. first try to lift the trim straight upwards, if there is a corner piece that covers the mirror bolts in the way, remove that. if it does not lift upwards, then do your best to get your fingers bt the trim and door and **** it outwards.

Posted on Aug 02, 2009

  • 1986 Answers

SOURCE: 2003 ford thunderbird how do you remove inner door panel?

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove door panel diagram for 2002 ford thundrbird


You may have to create account to see this, but good photos & step by step...
http://www.thunderbirdnest.com/forums/showthread.php?t=28309&highlight=remove+door+panel

May 07, 2015 | 2002 Ford Thunderbird

2 Answers

The cross dock on the left side of the door on my 2003 Thunderbird broke. How do I replace it?


there is no part that i am aware of that is called a "CROSS DOCK" so to help you with this problem we need to know the correct name of the part, contact Ford parts and ID the part with the correct name

Dec 05, 2009 | 2003 Ford Thunderbird

1 Answer

How to remove the drive side window on 96 tbird?


You have to pull the door panel, loosen the track/window framework and door opening/unlocking rods and remove the motor assembly. You then lower the track all the way down and the window is free and lifts up at an angle out through the window opening. Expect about an hour and a half to replace..

Nov 05, 2009 | 1996 Ford Thunderbird LX

1 Answer

Drivers door window motor and track broke how to do it your self 97 ford thunder bird electric windows 6 cylinder show me how to fix it myself please thank you


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you can readjust the window mechanics

Sep 24, 2009 | 1997 Ford Thunderbird LX

1 Answer

Loose window track in a 2002 Toyota Camry


Look for a missing bolt around frame

Jul 22, 2009 | 2002 Toyota Camry

3 Answers

I need to remove the drivers door panel to replace a broken door part. i took the screws out but i am afraid to force the panel off. is there some procedure to get this off. thanks richard


please rate, thx

Door Trim Panel Removal and Installation
  1. Disconnect the battery ground cable. For additional information, refer to Section 414-01 .
  1. Remove the door handle cup cover.
10aaa2c.gif
  1. Remove the screw.
7bce17e.gif
  1. Remove the switch plate by lifting the front and moving it forward.
    • Disconnect the electrical connectors.
2a7cd31.gif
  1. Remove the speaker grille.
    1. Release the front clips.
    1. Move the speaker grille forward.
70f4234.gif
  1. Remove the speaker screws.
d09e1c2.gif
  1. Remove the screws and the door trim panel.
    • Disconnect the electrical connectors.
b3c18cd.gif
  1. To install, reverse the removal procedure.

Jul 07, 2009 | 2002 Ford Thunderbird

1 Answer

Passenger side window


Pop off the red reflector on bottom. Remove screw that's there. Pry off inside part where power lock, window and mirror buttons are, starting away from inside handle. Slip this off the door handle, be careful with wires. Remove small gounding screw and then jst pull up and inside trim will come off. Assembly is reverse

May 27, 2009 | 1994 Ford Thunderbird

1 Answer

How to remove the door panel on a 96 Ford Thunderbird?


Carefully pull front door trim panel finish panel away from front door trim panel.
Disconnect wires from front door lock switches, outside rear view mirror controls and window regulator control switches, if equipped. Remove front door trim panel finish panel.
Remove front door trim panel retaining screw through front door trim panel finish panel opening.
Remove interior lamp lens cover.
Remove screw through interior lamp opening.
Slide front door trim panel upward to disengage hooks.
Rotate top of front door trim panel away from front door and lift bottom hooks from front door.
Disconnect window regulator jumper wire
Remove front door trim panel.

Feb 21, 2009 | 1996 Ford Thunderbird LX

1 Answer

2002 Ford Thunderbird


Hi!

You will need to open the door panel by looking for screws near the corners of the door and also on the inside handle, then look for any disconnections in motor that is used for the power windows operation. Also, see if the wire coming to the motor is fine and nothing is blocking the window to open.

Do rate the solution.
Thanks
Rylee

Feb 08, 2009 | 2002 Ford Thunderbird

1 Answer

How do i take the door panel off of a 2002 sonata to repair a window that is off track


Remove the door window regulator handle and then remove clip using a piece of cloth (Manual type only). esac050a.gif 2. Remove the quadrant inner cover and the rear view mirror. esac050b.gif 3. Remove the front door inside handle housing. esac050c.gif 4. Remove the front door trim panel. esac050d.gif 5. Insert a trim panel remover between the trim fasteners and the door trim panel to pry off. Disconnect the door lamp connector. esac050e.gif

Jul 25, 2008 | 2000 Hyundai Accent

Not finding what you are looking for?
2002 Ford Thunderbird Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...