Question about Oldsmobile Cars & Trucks

Open Question

Serpentine belt installation diagram 1988 oldsmobile cutlass ciera 2 door 2.3 liter

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

6ya.com

Download 6ya

6ya.com

Need repair answers fast Use 6ya to...

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2000 OLDSMOBILE AURORA SERPENTINE BELT DIAGRAM

Look on page 6-70 of your owners manual. It is listed under Engine Accessories Belt

Posted on Dec 07, 2008

  • 2 Answers

SOURCE: The windows in the 95 oldsmobile cutlass ciera won't work at all

maybe the wire is severed where the door (drver dr) pivots. thats what was wrong with mine. there is a rubber boot with crinkles in it that hold all the wires together. you can also try replacing the switch board that controls the wndws on the drvr dr. hope that helps.

Posted on Jan 20, 2009

MrScary66613
  • 1990 Answers

SOURCE: serpentine belt diagram for 1989 olds cutlass ciera. 2.5 engine-4 cyc.

http://www.mvreader.com/multiview/dayco/catalogSearch.php?autoCatalogSearch=1&make=OLDSMOBILE&model=CUTLASS%20CIERA&year=1989&year_from=&year_to=&engine=All&l=n

This should Help. Please Rate My Response! Thanks!

Posted on Feb 04, 2009

  • 14036 Answers

SOURCE: Changing spark plugs on a 1995 Oldsmobile Cutlass Ciera

ALL YOU NEED IS 3/8 RATCHET WITH A 5/8 SPARK PLUG SOCKET.YOU NEED EXTENSIONS AND UNIVERSAL JOINTS TO GET TO HARD TO REACH PLACES.YOU NEED A SPARK PLUG GAUGE.YOUR SPARK PLUG GAP SETTING WILL BE. 0.060 THAT WILL BE FOR THE 2.2 AND 3.1 ENGINES.

Posted on Aug 17, 2009

Testimonial: "Thank you very much for your advice and time!"

greg_margo
  • 1959 Answers

SOURCE: belt install diagram 3.4 liter

Below is the diagram you requested. Kindly return to rate this solution and thank you for using Fixya!
Greg
e4ea7d0.jpg

Posted on Sep 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does the 1990 oldsmobile cutlass ciera serpentine diagram look like?
This is GM 2.5L engine. My art isn't very good. The belt should be on passenger side of engine. This is serpentine belt. Sometmes there is a decal under the hood that shows the belt routing.
belt-3diza0jpquxzoc4egp5hkwtp-1-0.jpg

Jun 01, 2017 | Oldsmobile Cars & Trucks

1 Answer

I need a diagram on how to replace a serpentine belt on a 1999 oldsmobile cutlass
Search Results
    images for diagram on how to replace a serpentine
    How To Install Replace Serpentine Belt Oldsmobile Alero 99 ...? 3:33https://www.youtube.com/watch?v=jkzXTt43uwwFeb 9, 2012 - Uploaded by 1A Auto PartsHow To Install Replace Serpentine Belt Oldsmobile Alero 99-04 2.4L .... There should be a belt routing diagram on the frame rail or under side ...serpentine belt install 3.1/ 3.4 v6 - YouTube? 4:00https://www.youtube.com/watch?v=GYoWuvEZ2DcMay 6, 2013 - Uploaded by JoeTheAutoGuythis a serpentine belt install video on a 3.1 liter gm v6 , 3.4 liters are the same in ... Replacing the alternator or serpentine on anyOldsmobile Alero 99-04 3.4 Liter ... Serpentine Belt Replacement 1995-2005 Chevrolet Cavalier .

Dec 28, 2015 | 1999 Oldsmobile Cutlass

1 Answer

How do you check the timing on a 1988 oldsmobile cutlass ciera 3.8
images for 1988 oldsmobile cutlass ciera 3.8 wiring

Need diagram for 88 olds 3.8 engine`firing order - Fixya

www.fixya.com/.../t9979847-need_diagram_88_olds_3_8_engine_firin...
Aug 3, 2011 - need diagram for 88 olds 3.8 engine`firing order - Oldsmobile 1988 Cutlass Ciera question.

Sep 24, 2015 | Oldsmobile Cars & Trucks

2 Answers

Need help in replacing spark plugs on a 1995 olds cutless ciera the wiring order with diagram
1995 Oldsmobile Cutlass Ciera 3.1 liter V-6 VIN "M"

zjlimited_352.gif


1995 Oldsmobile Cutlass Ciera 2.2 liter L4 VIN "4"

zjlimited_353.gif


Hope this helps (remember to rate and comment this answer).

May 09, 2011 | Oldsmobile Cutlass Ciera Cars & Trucks

1 Answer

How to change serpentine belt on 1993 Olds Cutlass Ciera V6 motor
Click on the following direct Link. It has the Serpentine Belt Diagrams that you will need for your specific engine size and options (AC/No AC...etc).

Standard Rules to Removal the Serpentine Belt with a Tensioner:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating it\moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.

Standard Rules for Installing the Serpentine Belt with Tensioners:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1993/make/oldsmobile/model/cutlass_ciera/1993_oldsmobile_cutlass_ciera_drive_belt_routing_diagram.htm

Mar 22, 2010 | 1993 Oldsmobile Cutlass Ciera

1 Answer

Need a diagram of how a serptine belt is installed on a 1990 olds cutlass ciera 2.5 lieter motor
Click on the following free direct Link. It has the Serpentine Belt Diagram and Tensioner location for your 1990 Oldsmobile Ciera, depending on your size 2.5L Engine options (AC/No AC, etc.).

GENERAL/Standard Rules to Removal the Serpentine Belt with a Tensioner:
A. Find the Tensioner(s). (See Diagrams on Link)
B. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
C. Remove the loosened belt off one of the other more easily accessed Pulleys.
D. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with Tensioners:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

http://www.2carpros.com/car_repair_information/year/1990/make/oldsmobile/model/cutlass_ciera/1990_oldsmobile_cutlass_ciera_drive_belt_routing_diagram.htm

Feb 20, 2010 | 1990 Oldsmobile Cutlass Ciera

3 Answers

I need the firing order for a 1996 olds cutless cierra with a 3100 please
Your order is 1-2-3-4-5-6
Coil packs:
5/2 3/6 4/1
Cylinders:
1 3 5
2 4 6

Hope this helps,
matt

Oct 14, 2009 | 1996 Oldsmobile Cutlass Ciera

2 Answers

I need the serpentine belt routing diagram for a 1993 cutlass ciera V6 3.3
Call any good parts store and they have pictures in the front of their belt catalogs that show the routing diagrams of each car.

Sep 10, 2009 | 1993 Oldsmobile Cutlass Ciera

1 Answer

How to loosen serpentine belt?
ther should a 1/2 " square on the the pully where u can put a ratchet in relieve tension on the belt

Mar 25, 2009 | 1988 Oldsmobile Cutlass Ciera

1 Answer

Serpentine belt diagram
There should be a factory diagram at the front of the radiator top plate near the passenger side. That's where it is on mine, and it shows with and without AC. I hope that helps

Oct 22, 2008 | 1992 Oldsmobile Cutlass Ciera

Not finding what you are looking for?

View Most Popular

Cars & Trucks

Related Question

What does the 1990 oldsmobile cutlass ciera serpentine diagram look like?

  • Oldsmobile Cars & Trucks

Open Questions:

0 Answers

what does the glove compartment latch look like inside ?Its stuck shut and i need in it.2001 Oldsmobile Aurora

Aug 13, 2017 | Oldsmobile Cars & Trucks

0 Answers

1992 oldsmobile 88. Set 8 years since grandmotu passesd. Away Im trying to get it running to give to a needy family. New battery good fuel pump. When I turn the igition to start it. It dont do anything. I can short starter and and spray either and it will run

Aug 13, 2017 | Oldsmobile Cars & Trucks

0 Answers

My 96 Oldsmobile ciera starts and runs fine but I have no headlights,taillights etc..how can I fix this problem?

Aug 07, 2017 | 1996 Oldsmobile Cutlass Ciera

0 Answers

where is the accumulator located on 99 Olds cutlass?

Aug 03, 2017 | Oldsmobile Cutlass Ciera Cars & Trucks

Cars & Trucks Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

1985 Oldsmobile Delta 88

1992 Oldsmobile Cutlass

1997 Oldsmobile Cutlass Supreme

2000 Oldsmobile Alero

2002 Oldsmobile Bravada

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
OLDSMOBILE CUTLASS SUPREME...

1993 Oldsmobile...

PDF Manual
Manual. user-manual-1998 Aurora Manual

1998 Oldsmobile...

PDF Manual
Http://clubs.hemmings.com/clubsites/nt...

1992 Oldsmobile...

Loading...