Question about 2008 Chevrolet Uplander
All a dealer has to do--- is pick the parameters or data
they want to look at & compare & turn on the record
& play back feature,then drive the vehicle as you do
When it acts up --they return to the shop & play back the
info from the scan tool software
Now you component test
You need an ASE Master-- Level 1 tech-- to do the diagnostics
Posted on Dec 10, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You left out a lot of needed information but I will try to help out.
You can pull the spark plug wires off one by one while the engine is running to see if you have one or more cylinders are not firing. Depending on how long it has been I would do a tune-up first, replace spark plugs and wires, filters, fluids etc.
With that done and if all cylinders are firing pull the transmission dip stick and look at the fluid, I am assuming you have an automatic tranny. The fluid should be a light red, if it is brownish and has a burnt smell then you could have a problem with the clutches inside your transmission which can cause this same problem.
Posted on Nov 23, 2008
SOURCE: when turning right car vibrates
If the traction light is on, it sure seems like a wheel bearing. Jack it up and double check.
If you're sure the bearings are OK and the wheel bolts are tight, it almost hase to be the axle shaft/CV joint.
Posted on Jun 06, 2010
Who did the work?
Was all rust removed where required?
Was anything at all lubed?
Was the system properly flushed
I have never in 47 years of doing my own work,
ever had any brake issues.
I would say 95% of your type issues, are because the
brake work or service was not done correctly
That said, I am a perfectionist,former machinist,fabricator,
welder,and speciality automotive business owner,so
Iam always thinking, and time has never been an issue
Posted on Dec 04, 2010
Tips for a great answer:
Mar 30, 2015 | 2007 Chevrolet Uplander
Apr 22, 2017 | 2007 Chevrolet Uplander LS Minivan
Dec 27, 2012 | 2007 Chevrolet Uplander
Aug 09, 2012 | 2007 Chevrolet Uplander LS Minivan
Jul 23, 2012 | 2007 Chevrolet Uplander LS Minivan
Jul 15, 2012 | 2005 Chevrolet Uplander
Aug 23, 2009 | 2007 Chevrolet Uplander LS Minivan
Dec 02, 2008 | 2007 Chevrolet Uplander LS Minivan
Nov 13, 2008 | 2007 Chevrolet Uplander LS Minivan
267 people viewed this question
Usually answered in minutes!