Question about 2004 Mazda MPV
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: replacing the heater core in
From Haynes Repair Manual #36071, Ford Ranger Pickups 1993 - 2005 and Mazda Pickups 1994-2005 B2300, B2500, B3000, B4000: (1)Disarm the airbag system; (2)allow the cooling system to completely cool down; (3)using a thick cloth for protection, turn the radiator filler cap to the first stop; (4)step back and let the pressure release; (5)once the pressure has been released, completely drain the cooling system; (6) working within the engine compartment, loosen the ****,ps on the heater hoses at the engine compartment side of the firewall, twist the hoses and carefully sepseparate them from the heater core tubes; (7)plug or cap the heater core tubes to prevent coolant from spilling into the passenger compartment when the heater core is removed; (8)place a plastic sheet on the floor of the vehicle to prevent stains if the coolant spills; (9)remove the instrument panel; (10)remove the PCM heat sink and ground strap; (11)remove the heater plenum chamber; (12)separate the heater core from the heater plenum chamber; (13)installation is the reverse of the removal with the following additions; (a)fill the cooling system; (b)run the engine, check for leaks and test the heater
Posted on Aug 21, 2008
SOURCE: 2004 mazda mvp firing order
The firing order is 1-4-2-5-3-6. The cylinders are, front bank is from drivers side to passenger, 6-5-4 , and 3-2-1 at the firewall. This is for a 2004 Mazda MPV.
Posted on Dec 03, 2008
The reason is the water pump is driven off the timing belt, extra parts and allot more labor. No the eng does not have to be removed, labor time around 4 hours, parts about, about $125 US for parts, if it is a dealer add $75 US
Posted on Jan 08, 2009
I show $47 for each coil at rockauto.com here is the part #
STANDARD MOTOR PRODUCTS Part # UF406
here is a picture, is this the coil?
Posted on Feb 14, 2009
The firing order is 1-4-2-5-3-6. The cylinders are, front bank is from drivers side to passenger, 6-5-4 , and 3-2-1 at the firewall.
Posted on Jun 08, 2009
Tips for a great answer:
Nov 18, 2016 | 2004 Mazda MPV
Dec 28, 2012 | 2004 Mazda MPV
Jun 06, 2012 | 1997 Mazda MPV
Jan 10, 2012 | 2001 Mazda MPV
Jan 19, 2011 | 1993 Mazda MPV
Sep 27, 2010 | 2001 Mazda MPV
Jul 19, 2017 | 2003 Mazda MPV
148 people viewed this question
Usually answered in minutes!