Question about Cars & Trucks

2 Answers

The flashers work but the turn signals don't work

The turn signals was working but I thing I blew something when I tried testing the fuse panel

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 278 Answers

The turn signals have a separate flasher from the hazards, but will look the same. Your owners manual will tell you which one is which, and where they are located.

Posted on Dec 09, 2012

I would think checking all fuses-- would be the first thing to do

Next-- get a wiring diagram-- before any testing,so you have a
road map to follow

Posted on Dec 09, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: turn signals and flashers

Hello I had the same problem on my 04 monte. After changing bulbs ,checking wires etc. I finally took it to the dealer and they found out it was the hazard switch. After swapping it with a new one all lights, dash etc started working again and have not had another problem

Posted on Sep 05, 2008

  • 1 Answer

SOURCE: turn signal and 4- way not working

Installed a new turn signal arm

Posted on Apr 15, 2009

suterman
  • 158 Answers

SOURCE: flashers, turn signals and brake lights

Try shaking the turn signal lever rapidly. Not to the point of breaking it but you do want to apply a little extra pressure. move it in every direction for about 5 to 10 minutes. do not spray anything into the switch as it will collect dust and dirt in the future. This should get everything freed up and working in the multifunction switch. That sounds like where the problem is coming from.

Posted on Jul 03, 2009

  • 4 Answers

SOURCE: 1997 Chevy Tahoe both turn signals stopped working

Sounds like the flasher unit to me. Normally the emergency flasher and turn signal are separate.

Posted on Jul 21, 2009

  • 5370 Answers

SOURCE: turn signals don't work checked

For turn signal wiring diagram and troubleshooting.Please click on the link below:--- http://technoanswers.blogspot.com/2011/05/turn-signal-wiring-diagram-for-2000.html --------------- This should help.Thanks.Helpmech.

Posted on May 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why dont headlights come on an ford f 250


Hazard and turn signals usually use separate flashers, switch the flashers to see if turn signals work and hazards don't, if so replace the flasher

you need to replace the blinker flasher unit

it is different from the hazard unit

they cost about 4 bucks

the flasher unit is the big round thing in the fuse panel in the dashboard


Oct 05, 2012 | 1988 Ford F 250

1 Answer

Turn signals don't work


near your fuses, in the fuse panel you will find a silver/grey colored, often round thing, this is called a "flasher" this is probably your problem, replace the "flasher"

Jul 13, 2012 | 1990 Dodge Ram

1 Answer

1990 dodge truck turn signals don't work. 4 way flashers work


There should be a fuse for the turn signals. The hazard flashers are on a different circuit not controlled by the key switch.

Jul 13, 2012 | 2000 Oldsmobile Alero

1 Answer

2002 Bonneville SLE Turn signals and hazard flashers don't work,no clicking noise or signal lights in car on dash either Please help! Also if this is the signal relay switch where is it located on the...


The turn signals and hazard flasher should be on two different circuits, so I doubt a fuse would be the problem.
The multi-function switch in the column is the only thing I know of that would affect both.
A mechanic would test the circuits at the harness plug.

Jul 10, 2012 | Cars & Trucks

1 Answer

Can,t get signal or flashers to work on 1997 Dodge Intrepid


I assume you've checked the Fuses :p Obviously that hasnt worked and the bulbs and lights haven't worked either... SO try this????
Open the driver's side door and examine the end of the dash for an access panel. Behind the access panel are fuses and flashers. There are two flashers inside the access panel for controlling the turn signal and the hazard lights. You can distinguish them apart from each other by turning on the hazards or the turn signal and feeling for the clicking. If you turned on the hazards, then the flasher that is clicking is the hazard flasher.
Remove the turn signal flasher from the dash and reinstall the new flasher into the vacated slot in the dash. Close the access panel and start thetruck . Check the turn signals for proper operation and make sure the hazards work as well.


Please let me know how it goes
  • Jan 07, 2012 | Cars & Trucks

    2 Answers

    My turn signals won't come on at all?


    check the fuse if good then turn on the hazard lights if they work then you probably need a turn signal flasher which is a separate flasher unit then the hazard one.it usually looks like the hazard one so with the hazards on and locate it then you will know what the signal flasher looks like and you will also know not to change the wrong flasher unit.the signal flasher is often located at or near the under dash fuse panel or somewhere in the dash you don`t say what type of car your talking about.

    Dec 12, 2011 | Cars & Trucks

    1 Answer

    My turning signal don't work but the flashers do work. I have changed all fuses and they still don't work.


    since you know where the fuses are, you also know where the flashers are. the flashers are the same part so unplug the one for the emergency flasher and put it into the socket for the turn signals and vice versa. if the signals now work but not the emergency flasher you know to get a new flasher unit at any parts store. the flasher units are cubes about an inch on each side plugged into the fuse panel.

    Jun 27, 2011 | 1995 Chevrolet Caprice Classic

    1 Answer

    The brake lights work but the turn signals don't!! Have checked the fuses and bulbs, but not finding the problem


    Fuses and bulbs OK, but wires? Additionally I suggest keep in mind that turn signals work with FLASHER devices (two independent) on 1993 Buick Skylark..

    Application: Turn signal
    Flasher is located: Front seating area, driver side, under dash, driver side of steering column, mounted on support bracket

    Application: Hazard flasher
    Flasher is located: Front seating area, driver side, under dash, above kick panel, mounted in top of convenience panel

    Hope this helps (remember to rate and comment this answer).

    May 14, 2011 | 1993 Buick Skylark

    1 Answer

    How to fix turn signal on 86 Chevy Astro Van


    you don`t say but do the lights work either on the front/back on both sides.if not then it may be a fuse that needs replacing or need a bulb replacement.if the lights work but don`t flash then it sounds like a signal flasher problem.the flasher is located in the fuse panel under the dash on the drivers side.if the hazard flashers work then turn them on to find the hazard flasher by the fuse panel then you will know what the signal flasher looks like and change the signal flasher.make sure you change the one for the signals and not the hazard one.if the hazards work then i would say the signal switch is good as the hazards work through the same switch.

    Apr 21, 2011 | Chevrolet Astro Cars & Trucks

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    54 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    75797 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22114 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...