Question about Cars & Trucks

2 Answers

What is good in turmeric

Turmeric positive use

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 4 Answers

Turmeric is a natural herb. It is a natural antiseptic and analgesic.It speeds up wounding heals and it also used in improving digestion.But inspite of all this turmeric have some unique features. It is used to cure diseases like vitiligo .
Some people who are suffering from vitiligo disease doesn't know about turmeric vitiligo therapy.
Turmeric act as an antioxidants. It helps in skin regeneration. It clears acne. It helps with weight loss. It purifies the blood. It also strengthens the ligaments. It lowers cholesterol level of the body. Therefore turmeric is a very good herb.

Posted on Jul 20, 2017

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 109 Answers

It has many health benefits - helps prevent inflammation - it is said to aid in the prevention of cancer cells - speeds up metabolism aiding in weight loss and diet

Posted on Jan 14, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is Turmeric good for killing cancer


Hi, its good as anti-inflammatory also has healing remedies.

Jan 08, 2016 | Cars & Trucks

3 Answers

Does tumeric help stop pain


It is an anti-inflammatory so it can do with joint pain caused by inflammation. It also fights the risks of getting bowel cancer.

20 Health Benefits of Turmeric Eat This

Dec 17, 2015 | Cars & Trucks

1 Answer

Is Curcumin2K Formula with Black Pepper sold by Stop Aging Now.com legit?


Is your check engine light on? You might need to have it scanned.

Oct 31, 2014 | Cars & Trucks

1 Answer

No power


Sometimes this happens and you may have to cycle the switch back to off then go to the start position. Running a radio from the on position is not a good idea as there is still current going through the ignition circuit and this will burn out coils . You should be using the accessories position to listen to the sound equipment and if it is not working in that position then it might be a good idea to get it fixed.

Feb 17, 2014 | 2004 Infiniti QX56

1 Answer

2006 Scion xB won't crank/start...


thinc u gut some kinda internal engine issue--send it to magicmechanic online--hes an 8 time master on any engine--say 'help' on the subject--visit his tech library or listen to his radio show replay too

Feb 11, 2014 | 2006 Scion xB

1 Answer

My 05 Cadillac srx shuts off while driving but starts up with no problems


sounds like you are loosing your ground on your battrie remove your cables and clean your turmerals and reinstall

Feb 23, 2013 | Cadillac Cars & Trucks

1 Answer

96 Olds Aurora wont start nothing happens when i turn the key,battery is good.


CHECK THE INSTRUMENT CLUSTER FOR POWER TO GAUGES TO SEE IF THEY WORK WHILE IGNITION IS IN THE ON POSITION.IF NO CHECK THE 40 AMP IGNITION FUSE.IF FUSE GOOD IGNITION SWITCH IS BAD OR HAS A LOOSE OR BROKEN WIRE.IF FUSE GOOD ALL GAUGES IS WORKING.I BE LOOKING AT STARTER AND STARTER SOLENOID.REMOVE THEM HAVE AUTO ZONE TEST STARTER.OR YOU CAN GET A REMOTE STARTER SWITCH AND SET OF BATTERY CABLES.HOOK BATTERY CABLES TO A BATTERY.WITH STARTER OUT OF CAR TAKE BATTERY CABLES HOOK NEGATIVE BATTERY TO STARTER BODY FOR GOOD GROUND.TAKE POSITIVE BATTERY CABLE HOOK TO STARTER POSITIVE TERMINAL WHERE POSITIVE BATTERY CABLE GOES.THEN HOOK THE REMOTE SWITCH RED WIRE TO STARTER POSITIVE TERMINAL AND THE OTHER REMOTE SWITCH WIRE TO THE S OR SWITCH TERMINAL ON STARTER SOLENOID.PRESS THE REMOTE SWITCH IS STARTER RUNS GOOD WITH NO FUNNY NOISES ITS GOOD IF STARTER DONT RUN THE STARTER SOLENOID OR STARTER IS BAD. THE PROBLEMS IN YOUR CAR COULD BE A BAD KEY TRY ANOTHER KEY YOUR CAR HAS THE THEFT DETERRENT MODULE SYSTEM BEST TO HAVE CAR SCAN TO CHECK THE THEFT SECURITY MODULE AND THE TRANSMISSION NEUTRAL SAFETY SWITCH IF ITS BAD STARTER WONT WORK.ALSO CHECK THE THEFT DETERRENT MODULE RELAY. BEFORE REMOVING BATTERY CABLES TURN OFF RADIO SO YOU WONT LOSE YOUR RADIO PLAYING CODE.

May 20, 2010 | 1998 Oldsmobile Aurora

1 Answer

Jeep starts but stop soon as u relaese the key


I think you may have a worn out ignition switch! The on position might be bad and all the works is the start position.

You can check to see if the engine is getting power with the key in the on position. If it isn't, you need a new one!

The alternator or coil positive contacts are good places to check for juice! You can use a test light and watch the light go on and off.

Good luck and be careful!

Dec 11, 2009 | 1989 Jeep Cherokee

4 Answers

2004 saturn ion driver power windows switch will not work. Fuse good and passenger window switch works. The switch unit is good had a new on put on still did now work. Problems seems to be in wiring after...


Pull the rubber boot for the wiring harness in the door hinge area. I would suspect cut wires. Have the same issue. Bad design. What else is new.

Jun 12, 2009 | 2004 Saturn ION

1 Answer

Voltage drop test


First, check battery post to cable connection: positive meter lead on battery positive post, negaitve lead on battery's positive cable clamp. Crank the engine and note the reading. A good connection should have zero voltage drop. Second, check the positive cable: positve meter lead on positive battery clamp, negative lead on starter terminal connector. A good cable will show a voltage drop of .2 volts or less while cranking. Third, check the starter connection: positive meter lead on positive battery terminal on the solenoid, negative meter lead on actual starter stud. A good connection will have a voltage drop of near zero volts. Now to check the negative side of the circuit. Total drop on the ground side should be .3 volts or less and can be checked by placing positive meter lead on starter housing and negative meter lead on battery ground post. Take your reading while cranking the engine, and be sure your connection at the starter is solid and clean. If total voltage drop on this side of the circuit is excessive, complete testing at all connections in the same fashion as the positive side of the circuit. Check the following: between battery post and clamp (zero voltage drop), cable end at battery to cable end at engine. (.2 volts or less), cable end at engine to engine itself (near zero voltage drop), and finally between starter housing and engine block (.1 volts or less).

To read the entire procedure for all automotive systems read this artile:
http://www.engine-light-help.com/voltage-drop.html

Aug 31, 2008 | 1997 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...