Question about Cars & Trucks

1 Answer

I have a 96 dodge conversion van it won't shift

Posted by on

  • gbob59 Mar 09, 2015

    Double check fluid level. Last time serviced? Linkage between shifter and transmission may be a problem. Linkage may also have rubber bushings that have worn. Shifter mechanism below cover may itself have a problem (sloppy feel so no control)

×

1 Answer

Bands are adjusted when you first rebuild a unit
& don't wear enough to need readjusting

Most likely time to rebuild it

If that is original, you have gone 17 years,most
don't make 120,000 or ten years

Posted on Dec 09, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wont shift gears


Dodge Neon Questions - 04 neon will not go into high gear ...

www.cargurus.com > Questions > Dodge > Neon

CarGurusNov 3, 2012 - 04 neon will not go into high gear - 04 neon won't go into high gear. changed transmission fluid. (it tried to change after fluid was changed) gas cap ... ... Car: 2003 Dodge Neon SXT, automatic transmission. As of today, I have ...

Dodge Neon Questions - 2005 Dodge neon does not shift ...

www.cargurus.com > Questions > Dodge > Neon

CarGurusApr 6, 2014 - Your cars computer gathers info on speed in order to shift gears properly.... then you won't have a speedo and the ECM will not tell the TCM to shift gears in the trans. .... Car: 2003 Dodge Neon SXT, automatic transmission.

Neon wont shift out of first gear auto. - DodgeTalk : Dodge Car ...

www.dodgetalk.com > ... > Dodge Neon - General Talk
Jul 30, 2011 - I have a 2003 dodge neon se and it will run and drive. The transmissonwill not shift out of first gear. Where do I start? Compare to Toyota Tundra. Get Tundra on ... 2000 Stratus won't shift out of First Gear
Mar 14, 2007
Not shifting out of Second Gear???
Jan 15, 2007
46RE wont shift out of first at full throttle.
Nov 17, 2006
Transmission wont shift
Nov 3, 2005
More results from www.dodgetalk.com

Jan 06, 2016 | 2003 Dodge Neon

1 Answer

Can a faulty speed sensor in a 96 dodge ram automatic make it only read 1st and 2rd gear


not likely, the speed sensor sends the info to the pcm and will affect gear change, though its highly unlikely that the speed sensor can make the pcm "read" first or second gear, speed sensor sends info to the pcm to help it decide when to shift gears/apply abs/ etc

Mar 30, 2013 | Cars & Trucks

1 Answer

My dodge avenger shifts from first too second but wont shift back into first


transmission won,t shift from 1st gear,i changed the speed sensors and the shift module,and fluids ,filter,but still the same won,t shift,and ideas as to the problem?

May 19, 2012 | 1998 Dodge Avenger

1 Answer

Have a 96 aurora, won't shift into 4th gear? all


have you tried flushing ****** and changing ****** filter

Mar 04, 2012 | 1996 Oldsmobile Aurora

2 Answers

My shifting is skipping gears in my 1993 dodge ram 250 conversion van. My mechanic doesn't know why. I think it might be something that connects to the transmission. donna_rdly@yahoo.com


First thing you will need to do is change the transmission fluid and filter. You may have metal shavings inside your transmission pan blocking the filter kit and this would cause your vehicle to skip gears. Try installing the new fluid and filter kit first. Since you will have the pan off, replace the A and B shift solenoid if the new filter kit and fluid don't stop your transmission from skipping gears

Nov 06, 2010 | 1993 Dodge Ram

1 Answer

Transmission slipping


Did you check the trans oil level. When you changed
the RADIATOR you will loose some trans oil.
If the transmission oil was low when you changed
the radiator it's lower now. Check it now.
Now, if thats not the problem. With that many miles
have you changed the trans oil lately theirs a filter
above the trans oil pan that may be pluged up change
it and the oil. Also, buy a can of trans X it's the only fix
in a can stuff I"LL use.

Nov 09, 2009 | 1998 Dodge Ram 1500 4WD

2 Answers

I have a 96 dodge gran caravan i was driving it and it just stop i try turnin it on again it turn on good the motor sounds good too but when i try putin it in gear it turns off so i lifted up with the...


I am sorry you are having this problem. There are a few things we will have to check. Start with your oil and pull the oil stick and see if you have oil up to the line. If you don't add more oil into the engine at the oil cap on the engine. Next check your air filter and see if it is dirty. If so replace it because your car cannot breathe. Next check your fuel filter. These things I told you to check are immediate things you can do to start your car and keep it running. You probably need a tune-up. Have someone who knows cars do the checking with you. Good Luck

Sep 30, 2009 | 1996 Dodge Grand Caravan

1 Answer

96 dodge stratus tranmission will not shift into high gear


Have you run a test for trans trouble codes, sounds like a shift solenoid has failed or a defective connection to the trans from the control module.

Dec 04, 2008 | 2006 Dodge Stratus

9 Answers

1996 Dodge Ram Transmission shifting problem


I had the same problem with my 96 Ram 1500. I thought I was going to have to pull it out and get it rebuilt or just replace it. That was at 134,000Km it's now got 210,000 and shifting like a dream. What I did to solve the problem was this, as follows:
1. No lucas transmission Fix makes things worse.
2. Get your self a new transmission filter and gasket
3. Grab Gunk transmission medic 12oz
4. Grab 7 Liters of Valvoline ATF+4 transmission fluid (Made for chrysler transmissions)
5. Drop the trans pan and drain all the oil, clean pan and magnet
6. start truck for 5 seconds and the pump will pour out another 1 liter
7. re-install filter, gasket and pan, then add your Valvoline ATF+4
8. Add, the valvoline, transmission medic and make sure you have the right level of fluid

That solved my transmission problems, instantly it was shifting better, I no longer had to let off the gas to make it shift. Now if you have large pieces of metal on the magnet, and it's totally covered in filings, you might want to consider rebuilding the trans. My magnet had usual clutch.         

Anyhow good luck, let me know if it did the trick for you.
Justin

May 16, 2008 | 1996 Dodge Ram

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...