Question about Cars & Trucks

1 Answer

Stop sign lights up alarm sound when turning on ignition

Peugout 406 2001 estate

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 5,370 Answers

It can be any of the car doors not got properly locked or the door is locked but the switch is not sensing the door locked. Open and close each door again properly.

Or else its problem with any of switch wiring getting in contact with alarm wiring causing it to happen.

And last thing alarm connections need to be inspected. It's getting short somewhere in between.


There is a help link with solutions, to troubleshoot these types of problems. I suggest going through these link.


Click the link below: ------




CAR ALARM ISSUES
http://alltypesofpartsreplacing.blogspot.com/2012/11/factory-alarmsecurity-system-alarmcar.html


--------

These will help.

Thanks.

Posted on Dec 09, 2012

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76109 Answers

SOURCE: Alarm sounds everytime key removed from ignition?

There is a switch either in or on the driver door that turns on the interior lights and tells the module the door is open and the key is still in the ignition, this sounds the alarm, check all the doors and make sure they turn the interior lights on and off when the doors are opened and closed.

Posted on Nov 21, 2008

  • 249 Answers

SOURCE: peugout boxer 2.2 hdi servicing sign keeps coming

Need to test leak off on injectors, they suffer bad leak off, it will be one injector bad or 2 medium bad

Posted on Mar 27, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How can i get a manual for 2005 jeep liberty ?


Owners manual.. Dealer with he VIN#. Mechanics manual, any parts store. It covers all the Liberty's.

Oct 27, 2015 | 2005 Jeep Liberty

1 Answer

Key won't come out of ignition, car won't start, panic alarm goes off when I try to start it


Sounds to me like you need a new ignition switch. Take the vehicle to a mechanic and have them further evaluate.

Jan 24, 2014 | Volkswagen Cars & Trucks

2 Answers

2002 PT Cruiser inside alarm


its probably the key alarm the lock cylinder may need to be replaced

Jan 24, 2010 | 2002 Chrysler PT Cruiser

2 Answers

Just replaced battery on 2005 tundra, how do I reset the vehicle alarm. The alarm now sounds whenever I open the doors.


Anytime the alarm sounds when opening the door with the key, get into the truck anyway, place the key into the ignition key switch and turn it on and off 2 times. The horn will stop blowing and the lights will stop flashing. You're ready to go.......

Nov 05, 2009 | 2004 Toyota Tundra

3 Answers

Peugout boxer 2.2 hdi servicing sign keeps coming


I you belive you press the button on the dash infront if the trip counter then turn ignition on and hold button in for 10 seconds it should then re-set.

If helped please tick box

Aug 29, 2009 | 2006 Peugeot 604

2 Answers

1999 olds aurora when you turn the key just says clean key wait 3 minutes


the key has magnet on it that may be weakening. It will have to be reprogrammed.

  1. Insert the first valid key into the ignition switch and turn the ignition switch ON for at least 3 seconds but no longer than 15 seconds. Turn the ignition switch OFF and remove the first key.
  2. Insert the second valid key and turn the ignition switch ON within 15 seconds. After ten seconds a chime will sound and the Theft Alarm Light will begin to flash. Turn the ignition switch OFF and remove the second key.
  3. Insert a new Key into the ignition switch and turn the ignition switch ON within 60 seconds. After 10 seconds a single chime will sound. The Theft Alarm Light will stop flashing, turn on for 3 seconds; then turn off. The new key has been programmed.

Jul 07, 2009 | 1999 Oldsmobile Aurora

1 Answer

When i use my key in my doors my alarm doesn't arm mondeo estate


in the door is a switch that tells the alarm to activate start there

Feb 03, 2009 | 2002 Ford SVT Focus

1 Answer

Alarm sounds everytime key removed from ignition?


There is a switch either in or on the driver door that turns on the interior lights and tells the module the door is open and the key is still in the ignition, this sounds the alarm, check all the doors and make sure they turn the interior lights on and off when the doors are opened and closed.

Nov 21, 2008 | 2007 Volvo V70

2 Answers

Engine cut out


water in the ignition coil.

Nov 16, 2008 | 1989 Peugeot 405

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...