Question about 1997 Ford Expedition

1 Answer

Why does my 1998 ford expedition cut off when you put it in gear.

Posted by on

  • Troy Bennett May 11, 2010

    Does it cut off when you give it the gas while it is idle and not in gear?

  • kevin carpenter May 11, 2010

    what is the ilde rpm in park with the vech at operating temp?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Get some carb cleaner or the like & clean the throttle body & throttle plates good. this usually solves this problem

Posted on Feb 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WILL THE WHEELS FROM A 1998 EXPLORER WILL THE WHEELS FIT ON A 2000 EXPEDITION


No they will not fit.

The bolt pattern on the 2000 Ford expedition is different - it is 5 x 135.

The bolt pattern on the 1998 Exp is 5 x 114.3

Mar 19, 2016 | 2000 Ford Expedition

2 Answers

My 1998 ford exedition back fire when i start it do you know why it do that and whats gonna happen if it keep doing it


You have a timing issue. The spark advance is igniting at the incorrect time, with relation to piston and valve position.
The engine will begin to overheat and eventually will seize. The timing chain and gears need replaced. Approx. Cost is $5-700.00 at most repair shops.

Mar 15, 2015 | 1998 Ford Expedition

1 Answer

How do I wire an after market radio in a 1998 Ford Expedition?


Easiest and best way to put a aftermarket radio in any vehicle is to buy a radio plug adapter at Walmart for $10. No factory wires cut just wire the plug to the radio and plug it in.

Feb 21, 2015 | 1998 Ford Expedition

1 Answer

What makes a replacement starter keep on running, on a Ford Expedition ?


Either the starter is getting electric power from somewhere it is not supposed to get, or the gear drive is sticking on the flywheel.

Jun 11, 2013 | 1998 Ford Expedition

1 Answer

1998 Ford Expedition will not shaft into drive when igination is in the start position, having to turn the key back into the accessory position in order to get the gear to go into drive, have replaced the...


There is a solenoid on the shifter that releases when in run position. if you are having to put in accessory to get in drive and start in neutral . then the ignition switch is bad.

May 20, 2011 | 1998 Ford Expedition

2 Answers

1998 ford expedition how to install rear spider gears


Find a PICK-your-PART auto salvage and go get a whole rearend for $150 or so. You will be way far ahead. Or submit to the BLUE OVAL (dealership). Sorry no easy fix.

Sep 03, 2009 | 2000 Ford Expedition

1 Answer

1998 Ford Expedition air struts keep deflating.


You can check it for a leak by getting into vehicle and close the door.Turn ignition switch to on position and shift the gear shifter to neutral.You will hear the compressor turn on.Once compressor turns on put back into park,leave ignition on and exit vehicle.Compressor will turn off when you open door but will turn back on after you close it. Now listen at each corner to see if you can hear where your leak is.

Feb 26, 2009 | 1998 Ford Expedition

Not finding what you are looking for?
1997 Ford Expedition Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...