Question about 2007 Isuzu MU-7

Open Question

Where is the suction control valve on a 2007 isuzu rodeo

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

messstat
  • 365 Answers

SOURCE: 1997 Isuzu Rodeo, 4.2L All windows stopped working!!!

all windows controlled from the drivers door...if you have someone in the family with BIG fists have them stand beside the drivers door panel and putting the **** against the door, SLAM their fist into the door panel right under the switches. Take a can of WD-40 and spray ALOT directly around the switches in the door using the little red hose WD40 gives you. GM's are known for carbon-tracking their door mechanisms...build up over the years...sometime banging the door knocks the buildup loose allowing the circuit to work.

Posted on Jun 14, 2009

bubby001
  • 18 Answers

SOURCE: I need a diagram on how to change a valve cover

your not going to find one but theres nothing to it just remove anything thats in the way then the cover.

Posted on Oct 26, 2009

honeymokey
  • 3113 Answers

SOURCE: where is the Vacuum Solenoid Valve located on 97' isuzu rodeo 4x4

yes,drivers side front axle tube.

Posted on Feb 12, 2010

  • 179 Answers

SOURCE: I have a p0401 on my Isuzu Rodeo, but I have

Yes this is a very common problem on Isuzu's the EGR was most likely Ok. It's the passage that's clogged, good news is it costs nothing to fix, straighten out a clothes hanger, take the air tube right behind the throttle body and unbolt the throttle body. slide it out of the way and look inside engine with flashlight and you will seethe tube clogged with carbon. Now, use throttle body spray cleaner and spray into tube while clening it out with a hanger as well, it's usually the last 1/4" that's clogged. 85% of the time the tube is clogged causing a po 401. Only 15% the EGR valve is bad. have fun and happy motoring!!!!!!!

Posted on Oct 27, 2010

  • 157 Answers

SOURCE: Where is the egr valve

egr valve is located in the back top of the engine slightly to the left if your looking under the hood. it looks like a cylinder

Posted on Nov 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove accumulator on transmission on Isuzu Rodeo?


Planetisuzoo.com • View topic - Transmission Accumulator Piston Cover

forum.planetisuzoo.com/viewtopic.php?t=38884
Apr 2, 2010 - 20 posts - ‎8 authors Have any of you ever changed the Accumulator Piston Cover on the side of yourtransmission? ... 2001 Isuzu Rodeo LS :: 3.2L V6 Auto 4L30E >> clicky for pics << ... I got the kit, and I even scored the removal tool on eBay. 1991 Trooper Transmission Pan ...
26 posts
Mar 20, 2012
2000 Rodeo Transmission Fix
10 posts
Jun 25, 2011
Smoke coming from bottom of Isuzu ...
24 posts
May 21, 2011
TSB information
7 posts
Jul 23, 2007
More results from forum.planetisuzoo.com

isuzu rodeo transmission - YouTube

? 1:37
www.youtube.com/watch?v=CyJZQLwnfPY
Sep 3, 2013 - Uploaded by besiratabay
2001 isuzu rodeo transmission problems 2002 isuzu rodeo transmission 1999 isuzu rodeo transmission .

Oct 30, 2015 | Isuzu Rodeo Cars & Trucks

3 Answers

Cost to replace egr valve on a 2001 isuzu rodeo. The ECM has detected too much flow on the EGR system. How much will it cost to replace the ER valve on a 2001 Isuzu Rodeo


just went on line to rodeo egr valve and the price is around $345.00AUD. + labour to replace.Probably 75% that if in USA

Dec 25, 2014 | 2001 Isuzu Rodeo

1 Answer

I have a 2003 isuzu rodeo my brakes are very hard to push. line was disconected from the manifold to the mastercylider recently and was wondering if it need to be bleed or how do i get the pedal from...


Good day
If you had disconnect the hydraulic line then yes you have to bleed all the air out. You need someone to help you.
I understand that you can still use your brakes but it's hard to stop with the force you have to put on the brake. This problem comes from the booster. The booster is the big round drum sits behind the master cylinder. There is a pipe connect from the booster to the intake manifold. Check that pipe if it's blocked or not. If it is then check out the pipe got a check valve in the line might cause the problem. To do a test you can disconnect the pipe from the booster and put your thumb over it and feel the suction on it. If no suction the pipe is blocked and if not then you will hear an uneven idling in the engine. If the pipe got a suction and you put it back on to the booster and the engine still idle bad then the booster rubber is broken and you have to get a new booster.
Good luck from Will.

Jul 09, 2014 | 2003 Isuzu Rodeo

1 Answer

Code p1860 comes up when I scanned a 2000 Isuzu rodeo. can you help?


That code indicates a TCC PWM Solenoid Circuit Failure (torque converter clutch pulse width modulation (TCC PWM) solenoid valve controls the fluid acting on the converter clutch valve):
http://www.troublecodes.net/isuzu/iszuobd2.shtml
is where I found that information.
I hope that will help.

Dec 13, 2011 | 2000 Isuzu Rodeo

1 Answer

Hearing ticking noise from my 1993 isuzu rodeo. Tried oil changes, additives etc. Need to know step by step instructions on replacing lifters.


I had same problem with 99 Isuzu Rodeo LS 3.2 V6. Dealer couldn't find it and many, many other owners experienced same thing. finally found a post where a mechanic (non dealer) changed the idle air control valve. so i tried it, and after 3 years of dealing with the problem, it worked!!! part costs about $40 and very, very easy to change yourself. for the 99, its located in front of engine, so easy access. Good Luck

Feb 18, 2011 | 1993 Isuzu Rodeo

1 Answer

1992 Isuzu Rodeo Heater only blowing cold air


Thermostat! or blockedf heater matrix, no idea where the thermostat is on that car never worked on one.

hope this helps

Jan 15, 2010 | 1993 Isuzu Rodeo

1 Answer

Cant find modulator valve on 94 isuzu rodeo


if u mean the vacuum modulator valve, it doesn't have one, it is an electronically controlled transmission, what is the problem with trans?

Feb 19, 2009 | 1994 Isuzu Rodeo

1 Answer

What is the Radiator Cap Pressure for Isuzu Rodeo 1996 2.6-4cyl


Cap pressure is best determined by going to the auto parts store and buying a new one. You can ask the counter guys to look it up online before actually buying.
Most radiators today run 15 PSI, but the cap is just a safety valve, and has nothing to do with controlling the actual pressure. The thermostat does that, and if your having boil over problems, then you need to be looking to other causes (plugged radiator, bad water pump, etc.).

Jan 23, 2009 | 1996 Isuzu Rodeo

Not finding what you are looking for?
2007 Isuzu MU-7 Logo

Related Topics:

286 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...