Question about 2006 Kia Sorento

Open Question

2006 kia sorento wont start after changin spark plugs

I changed the spark plugs on my sorento and from what I can see everything is in the same exact position. But now it turns over but won't start. There is a weird clicking whirring sound coming from the plug attached to the lower part of the throttle body. I removed the throttle body to get to plugs on the passenger side but plugged everthing back in. Help!

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
aref_bilal
  • 13 Answers

SOURCE: I am changing the spark plugs on my 2004 Kia sorento

Be careful there.. If you remove the Throttle Position Sensor TPS or the throttle Cable, the engine light will come on because there is a certain setting that needs to be done to ensure accurate emission control.

Posted on Apr 14, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changing spark plugs 2006 KIA sorento LX 4.5


Kia Sorento first generation 2003–2006

the how to
starts at post 5
04 Sorento spark plugs

this 04 sorento owner took him 4 hours to change the plugs

take pictures as you go
not so simple
you have to remove a few parts to reach the plugs

1f16ea8d-6adf-4e20-9f8d-c9647ef6bd1b.jpg

Nov 25, 2016 | Kia Cars & Trucks

1 Answer

My kia sorento 2003 3.5l v6, wont start. Turns over right away but wont start


Test for spark at plugs, fuel pressure, compression, timing belt.

Feb 26, 2015 | 2003 Kia Sorento

1 Answer

No start after changin spark plugs


check firing order is right

Oct 17, 2013 | 2006 Kia Sorento

1 Answer

Looking for a diagram to replace spark plug wires for 2006 Kia Sorento EX 3.5


Are you sure it has wires check close it may use separate coils for each cylinder that replaces the need for coil wires.

May 19, 2013 | Cars & Trucks

2 Answers

I have a 2006 Kia sorento and we changed fuel pump but still will not start back up?


always air fuel spark basics first pull number 1 spark plug wire check for spark.then fuel.

Aug 21, 2011 | 2006 Kia Sorento

1 Answer

How to replace spark plugs in a kia sorento


The 2006 KIA Sorento is a smaller SUV with a 3.5-liter V6 engine. This engine uses six spark plugs to run the engine properly. There will be three spark plugs on each side of the engine. All six spark plugs will need to be changed at the same time to ensure that all six are working equally. The spark plugs are in plain sight on the right and left side of the engine and have rubber wires connected to the top of each one.
  1. 1 Insert the edge of the spark-plug gapping tool under the meal arm in the center of the one of the new spark plugs and turn the gapper until the number .038 is in the center of the metal arm. Repeat this for all other new spark plugs.
  2. 2 Open the hood of the 2006 KIA Sorento and remove a rubber wire from one of the spark plugs. Use the ratchet and spark-plug socket to remove that spark plug from the engine.
  3. 3 Insert the new spark plug into the hole where the old plug was. Hand-tighten the new spark plug until you are certain it is seated properly, then tighten it further using the ratchet and spark-plug socket. Replace the rubber wire to the top of the new spark plug.
  4. 4 Repeat for all other new spark plugs. Once you have replaced all six spark plugs and replace the rubber wires to the tops of them, close the hood.

Jan 21, 2011 | 2006 Kia Sorento

1 Answer

How to change a timeing belt on a 2006 Kia Sorento?


Kia engines are interference engines. If the Timing belt is not done exactly right you will destroy your engine. I don't recomend anyone do a timing belt unless you allready know exactly how to do it right.
I have done many , and made a SMALL mistake on my mazda last month and ended up having to rebuild the head and replace valves , guides , and seals.

Apr 14, 2010 | 2006 Kia Sorento

1 Answer

Why is my 2006 Kia Sorento squealing


Change your belt for its glazed and upon getting hot while it is runing for the 10 minutes the belt starts squealing

Apr 08, 2010 | 2006 Kia Sorento

2 Answers

I HAVE A 2006 KIA SORENTO. THE CHECK ENGINE LIGHT


p0454 erratic evap pressure sensor signal
p0122 throttle position sensor circuit low
p0113 intake air temp signal low
p0305 cyl #5 missfire
i would look for a short or open wire somewere
i checked TSBs from kia and none pertain to you
clear codes and drive then check to see if they come back. then repost

Mar 24, 2010 | 2006 Kia Sorento

3 Answers

I am changing the spark plugs on my 2004 Kia sorento


Be careful there.. If you remove the Throttle Position Sensor TPS or the throttle Cable, the engine light will come on because there is a certain setting that needs to be done to ensure accurate emission control.

Apr 04, 2009 | 2006 Kia Sorento

Not finding what you are looking for?
2006 Kia Sorento Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

yadayada
yadayada

Level 3 Expert

77169 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...