Question about 2004 Dodge Durango

Open Question

How to fix severe engine misfire on 4.7 v8 2004 dodge durango after major rain

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 13 Answers

SOURCE: Durango won't start in rain or wet

Do you get the "Nobus" warning light when it won't start? Go to AutoBeef.com and you will see that 98 & 99 Durango are notorious for stalling without warning. I fixed mine by purchasing a refurbished PCM "Brain" from an online Florida site -- you can google I don't remember the name. I called them and they helped me -- 3 screws to change out the PCM and no problems with my Durango since.

Posted on Apr 08, 2009

Ad
  • 4 Answers

SOURCE: when it rains, my 2004 dodge durango hesitates and

I had the same problem. Same year, too. 2004 4.7L Durango. Took it to a Dodge Dealer in Oak Lawn, IL. Problem was when it rained out water got into the engine from the hood by the windshield wipers. The spark plugs got all wet causing the engine to hesitate and shake. I had to have a water dam installed and never had anymore problems. Hope this helps you out.

Posted on Jun 24, 2009

  • 8 Answers

SOURCE: 2002 Dodge Durango 4.7L V8 Check Engine Codes

1st try and search for a vaccum leak, due to the fact that these vehicles have had some bad problems with the length of wires and hoses, if there is a vaccum leak in the vehicle somewhere that will trigger other malfunctions in your vehicle. Using a can of starting fluid or Brake cleaner spray lightly spray around our engine til you hear the motor rev-up and the spot you have sprayed will determine where your vaccum leak will be. And then check under your distributor cap for any moisture be sure to take a rag and wipe and residue off. Also check the firing order on your distributor.

Posted on Oct 28, 2009

bschilz
  • 2049 Answers

SOURCE: the code reads P 306 misfire on cylinder 6. How

A P0306 code means that the car's computer
has detected that one of the engine's cylinders is not firing properly. In this case it's cylinder #6.

Symptoms may include:
the engine may be harder to start
the engine may stumble / stumble, and/or hesitate
other symptoms may also be present

Causes

A code P0306 may mean that one or more of the following has happened:
Faulty spark plug or wire
Faulty coil (pack)
Faulty oxygen sensor(s)
Faulty fuel injector
Burned exhaust valve
Faulty catalytic converter(s)
Running out of fuel
Poor compression
Defective computer

If there are no symptoms, the simplest thing to do is to reset the code and see if it comes back.

If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors.

Posted on Feb 15, 2010

Testimonial: "Thanks for the ideas"

  • 1 Answer

SOURCE: my 2005 5.7 engine dodge durango stalls

Try replacing the PCV valve.

Posted on Jul 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

04 dodge durango slt. Every time it rains my car stalls and check engine light comes on. Went through car wash also and it died. I can wash myself and don't have this problem. Maybe under engine??.


Something is getting wet. Check the codes with a code scanner to see if you can isolate the problamatic area. The code/s may point you to what circuit is causing your trouble

May 10, 2015 | 2004 Dodge Durango

1 Answer

How to fix engine code u-1411 and u-110e


Remote start? Does it happen only in the rain?
U1411 Possible Causes
CAN B OPEN OR SHORTED
CLUSTER MODULE
FRONT CONTROL MODULE (FCM)
POWERTRAIN CONTROL MODULE(PCM)
Warranty still in effect?

Jul 31, 2014 | 2004 Dodge Durango

2 Answers

Random Misfire


This can be due to a leaking pressure regulator and or the injector lines leaking. These are located under the plenum, which has the throttle body mounted in the center.

May 28, 2014 | 2002 Dodge Durango

1 Answer

Dodge Durango engine knocking and check engine light


P0300 is a Random Misfire
P0302 #2 Cylinder Misfire
U1120 The code U1120 means, lost wheel distance message. The powertrain control module(PCM) is not
receiving a signal from the anti-lock brake module. The problem could be a short in the bus circuit,
the PCM or the anti-lock brake module. This type of problem is best diagnosed by the dealer or a
local shop with the proper diagnostic scanning equipment. Hope this helps.

Apr 14, 2013 | 2004 Dodge Durango

1 Answer

I have a 2003 dodge durango 4.7 and it is overheating which i already r&r the thermostat. fixed the problem a lil but not 100%. also check engine light turned on for second time both same code P0308...


yes... overheating can cause issues in your piston/cylinder head. if your cylinder head is made from aluminum and not metal, overheating can cause cracks and bends in your cylinder head. if this cracks occur inside the combustion chamber, then proper compression cannot be attained. you need to rebore then resleeve your combustion chamber and change the pistons to fix this issue. this will also require resurfacing of cylinder head to ensure that it does not create leaks against crankcase.

Aug 05, 2011 | 2003 Dodge Durango

1 Answer

Oo dodge durango is flashing codes p0201,p0207,p0300,p0301,p0307 what is this telling me that needs to be fixed


P0201?? Injector #1 Ctrl Circ /
P0207 Injector #7 Ctrl Circ /

P0300?? Multiple Cylinder Misfire
P0301?? Cylinder #1 Misfire
P0307?? Cylinder #7 Misfire
are the codes start with the basics inspect plugs wires cap rotor and if all checks out do a compression test

Dec 31, 2010 | 2000 Dodge Durango

2 Answers

The engine light is on and blinking, engine trying to stall out


this means your engine has a misfire, there will be a code to ID the cylinder causing the light to flash, Kragen and other discount auto parts stores will test the system for free unless u are in California.

Dec 24, 2009 | 2004 Dodge Durango

2 Answers

When it rains, my 2004 dodge durango hesitates and shakes when coming to a stop, engine light comes on. after it dries out, runs fine and engine light turns off, dealer cannot fine the issue


I had the same problem. Same year, too. 2004 4.7L Durango. Took it to a Dodge Dealer in Oak Lawn, IL. Problem was when it rained out water got into the engine from the hood by the windshield wipers. The spark plugs got all wet causing the engine to hesitate and shake. I had to have a water dam installed and never had anymore problems. Hope this helps you out.

Jun 15, 2009 | 2004 Dodge Durango

1 Answer

2000 dodge durango misfiring


first replace the spark plugs, if still misfiring check compression if low the engine needs to come apart looking closely at the valves, if compresssion is EQUAL +- 10psi on all cylinders then injectors are suspect

Apr 10, 2009 | 2002 Dodge Durango

1 Answer

Durango won't start in rain or wet


Do you get the "Nobus" warning light when it won't start? Go to AutoBeef.com and you will see that 98 & 99 Durango are notorious for stalling without warning. I fixed mine by purchasing a refurbished PCM "Brain" from an online Florida site -- you can google I don't remember the name. I called them and they helped me -- 3 screws to change out the PCM and no problems with my Durango since.

Mar 16, 2009 | 1999 Dodge Durango

Not finding what you are looking for?
2004 Dodge Durango Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...