Question about 1995 Ford F250

1 Answer

Right rear blinker not working!

I have a 95 ford powerstroke, and the right rear blinker does not work. the brake light, hazard, and running light all work except when i turn on the right blinker the brake light on the right stops working. The blinker for the front right works just fine though?! i just put in a new blub and flasher, I have a new multifunction switch but I don't know if thats a problem and would rather not install it to test and see if thats the problem because if its not i won't be able to return it. any clues where to start digging?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 235 Answers

Check the socket whare the bulb goes for rust corosion. you can also test the socket by removing bulb and using a 12 volt test light. remove bulb and connect test light leads to the socket while the signal is on.connect one lead from test light to inner wall of socket and the other one to the terminals in bottom of socket

Posted on Jan 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2011 Expedition left rear blinker light not working even after replacing bulb...also, brake bulb does not work with hazards, but does work with brakes and headlights...ideas?


In my experience, when the hazards are on, the brake lights are not supposed to indicate braking in this day and age of automobiles. In other words braking lights will not override the hazards when hazarding. I believe the 3rd or high mount brake light should work when hazarding and braking at the same time to indicate you are braking. I find it very seldom is there the need to drive and have the hazards on....in torrential rain going at low speed perhaps. Anyway, hope this was helpful. If not, I apologize.

Jan 10, 2013 | Ford Expedition Cars & Trucks

1 Answer

My brakelights are both not working after changing the bulbs, changing brake pedal sensor, and checking all fuses. The running lights, parking lights, turn signals, hazard lights all work. Please give me...


Probably the blinker switch ..The brake light circuit runs through the blinker switch..Let somebody look and while you have the brakes applied move the switch around and see if the lights come on

Sep 09, 2011 | 2002 Ford Explorer Sport Trac

1 Answer

Right and left brake light out but center brake light ok on 2000 merecury moutaineer


Have you tried replacing the bulbs? The two side lights run through the turn signal switch so if they aren't getting power, chances are your signal switch is bad. Do your front blinkers work? Do the rear lights come on when you use the blinkers or the hazards?

Jan 15, 2011 | Mercury Mountaineer Cars & Trucks

1 Answer

HAVE RPLACED BULBS AND BRAKE SWITCH AND HAZARDS WORK FINE AND BLINKERS WORK TOO STILL NO BRAKE LIGHTS


check the bulbs again make sure the brake and signal light bulb has two filaments in it, the parking lights ony has one filament

May 21, 2009 | 1999 Ford Taurus

1 Answer

Brake Lights and Blinkers don't work


try tapping the hazard switch on and off a bunch of times fairly hard. these switches have a tendency to go bad and neither the hazards or turn signals will work

Dec 10, 2008 | 1999 Ford F350 Regular Cab

Not finding what you are looking for?
1995 Ford F250 Logo

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...