Question about Cars & Trucks
Have code but radio is showing err
If a standard ford type radio as in the escort and focus then the first number is reached by touching the first button so many times ,then the same for the second ,third and fourth number then when showing the correct number in the screen you push button no5 and this locks the code in and it works ?? hopefully
Posted on Dec 09, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Radio code
leave the radio switched to the on position, turn your car ignition on to "accessories" and wait for about 20-30 minutes. the radio should change from ERR and offer you to enter the CODE agian. Good luck!
Posted on Aug 21, 2008
The dealer has to send the radio out to their authorized service rep to hve the EPROM in the radio re-flashed with a new code.
These radios have no master key code. They were designed to be very secure.
Posted on Jul 12, 2008
start by unplugin the electric fans then remove the two 10mm bolts holding them in, the bottom of the fans are held in by a slot that they sit in so after you remove 2 bolts just lift the fans out. then you will see a tensioner i think it has 3/8 drive square hole in it( could be 1/2'' drive) just pull it down with a long bar with a 3/8 end on it to release the tension, while doing that slide the belt of,. if your car doesnt have a picture diaghram on the under side of the bonnet for drive belt routing draw a picture incorprating all the pulleys an how the belt goes around them. once the belt is of put the new one on exept over the power steering pump pulley, then pull on the tensioner again to release tension and slide the belt over the p/s pulley. these instruction are for the 4.0l falcon motor, the 5.0 v8 is really similar
Posted on Apr 22, 2009
SOURCE: My car battery dies for @ two hours i jumped it and then the radio wont work and is flashing code. i read manuel and did what it instructed for entering code provided with car and it still wont work w
Try the code again. Turn car key on. Turn radio on. Enter the 6 digit code, using the numbers on the preset channel button. It might take more than one time, if you entered the code wrong the first time. I entered it wrong the first time, took a few tries to unlock with correct code. Did it again today with the right code, and it worked the first time I entered it.
Posted on Jun 18, 2009
Pulled out instrument cluster, un pluged, connected back and reinstalled. Bingo! everything works fine. Faulty connection maybee???
Posted on Oct 23, 2009
Tips for a great answer:
Jul 06, 2017 | Ford Cars & Trucks
Nov 24, 2016 | Ford Cars & Trucks
Nov 03, 2016 | Ford Cars & Trucks
Feb 15, 2015 | Ford Cars & Trucks
Jul 14, 2014 | 1999 Ford Falcon
Aug 12, 2010 | Ford Fairmont Cars & Trucks
Dec 26, 2009 | Ford F Cars & Trucks
Apr 30, 2009 | 1999 Ford Escort
Jul 11, 2008 | Ford Futura Cars & Trucks
662 people viewed this question
Usually answered in minutes!