Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: cabin filter 2001 xterra
Remove glove box and in cabin microfilter door will be right there. Note on some Xterras there is no filter installed and the box will need to be cut out in order to install kit. This is a fairly easy task that can be done in the vehicle. Just follow the directions and you should be ok.
Posted on Sep 16, 2008
SOURCE: in cabin air filter
its most likely located behind the glove box. which usually comes unhinged fairly easily from its open position stoppers. then there would be an access panel to remove to get to filter(s)
Posted on Oct 24, 2008
I have a factory manual for 1999-2004 but I believe the filter is in the same location on a 2005. First, you have to remove the glove box. It's a straight forward process with a phillips head screwdriver and a 10mm socket. The filter is in the middle of the black plastic air handler behind the glove box. It is in a vertical slot covered by a narrow "door" with clips on top and bottom. If it has never been changed before, you will have to cut out the horizontal plastic cross brace that kept the dash assembly from warping during manufacture. Cut with a hack saw at each end of the plastic brace and remove it. You'll notice a metal cross brace that can be removed with screws at each end. Once the braces are removed, it is easy to unclip the filter door and replace the filter. Then just put everything back except the plastic cross brace you removed; it can be thrown out.
Posted on Jul 15, 2009
I'm going to send you exploded view of the glove box and the in cabin micro filter cover illustration. Remove the two upper screws on the glove box and carefully pry metal clips loose.
Disconnect glove box lamp electrical connector. Do not let glove box assembly hang from glove box lamp harness.
Remove three lower screws and remove damper clip from glove box door. Separate glove box housing and passenger instrument lower panel.
Remove three screws and remove in cabin micro filter cover.
Remove in cabin micro filters from front heater and cooling unit assembly.
Note When installing two new in cabin micro filters ensure that the filters are facing in the direction indicated by the direction arrow for the airflow. Direction arrow is printed on side of in cabin micro filters.
Install in cabin micro filter cover. Reinstall glove box.
Posted on Oct 10, 2009
Testimonial: "Finaly I found the air flow door with three screws and removed it. The filter will need replacement soon. It is been replaced one time at the dealer."
it should be located under the hood somewhere on the firewall.If in doubt the parts store where you get the filter can look it up in the same book the look your filter up in
Posted on Jun 07, 2012
Tips for a great answer:
Dec 10, 2015 | Nissan Cars & Trucks
Feb 01, 2015 | 2011 Nissan Murano
Feb 01, 2015 | 2011 Nissan Murano
Oct 06, 2014 | 2011 Nissan Rogue
Dec 17, 2012 | 2003 Nissan Pathfinder
May 30, 2012 | 1989 Nissan Patrol Wagon
Jul 04, 2011 | 2001 Nissan Maxima
Feb 23, 2010 | 2004 Nissan Murano
Jan 28, 2010 | 2002 Nissan Sentra
640 people viewed this question
Usually answered in minutes!